This function was badly named and completely undocumented. Rework it to
avoid copying the full UID list using an iterator. Make it possible to
hand it a list of UIDs as strings rather than implicitely relying on the
fact that they are numeric already. Document the code.
The behavior off the function itself remained otherwise unchanged.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
SEARCH and FETCH were never checking that the IMAP server actually
returned OK. Throw OfflineImapErrors at severity FOLDER in case one of
them fails.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
Some code cleanup. If we want to examine all messages of a folder, don't
try to find out how many there are and request a long list of all of them,
but simply request 1:*. This obliviates us from the need to force a select
even if we already had the folder selected and it requires us to send a
few less bytes over the wire.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
Do away with the wrapping of this code in a try...except KeyError, as
this code cannot conceivably throw a KeyError. Even if it could, it
should be documented why we should simply return() in this case.
Shorten some of the variable names and minor code cleanup while taking
the git blame anyway.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
Rather than passing in huge lists of continuous numbers which eventually
overflow the maximum command line length, we coalesce number ranges
before passing the UID sequence to SEARCH. This should do away with the
error that has been reported with busy mailing lists and 'maxage'.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
Empty foldernames (as they could be created through nametrans) were
failing as the uidvalidity and status files names as determined by
folder/Base.py:getfolderbasename() lead to invalid file names ''.
Fix this by handling empty file names and translating them to '.' which
leads to the special file name 'dot'. (this special value existed before
and was not invented by this patch)
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
It works by fetching all headers of new messages from IMAP server and
searching for our X-OfflineIMAP marker by using regular expression.
Signed-off-by: Vladimir Marek <vlmarek@volny.cz>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
We only copy to a single folder anyway, so clean up the code to only
pass in a single folder.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
We were not including the full server reply into our error message. Fix
that so we get better error logs.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
This is a bug fix on several levels. 1) We were lacking the import of
OfflineImapError. 2) OfflineImap.ERROR.MESSAGE was misspelled as ERROR.Message.
3) COntinuing with the next message only worked in single-thread mode
(using debug) and not in multi-thread mode. The reason is that we were
invoking a new thread and catching Exceptions in the main thread. But
python immediately aborts if an Exception bubbles up to a thread start.
This was fixed by catching exceptions directly in copymessageto() which
is the new thread, rather than catching them in the main thread.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
append() raises an Exception, in case the IMAP server replies with 'BAD'
(but not when it responds with 'NO') but we were not catching that. Do
catch the situation and also raise an OfflineImapError at MESSAGE
severity, so that we can continue with the next message.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
This function was overridden as the IMAP version apparently had been
using imapobj.myrights() at some point in time, which was not
implemented in the Gmail version. However, IMAP is not using myrights()
anymore, and as that is an extension that needs to be advertised in
CAPABILITIES we should not unconditionally use it anyway.
So remove the function that is identical to it's ancestor's
function.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
We simply assert()ed that APPENDing a message returned OK, but in some
cases (e.g. Google chat messages) APPEND might return BAD or NO too. We
should be throwing an OfflineImapError here at MESSAGE level, so that we
can continue to sync all other messages, and still give the user some
details on what went wrong at the end of the sync run.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
Rather than using ui.warn, use ui.error() which outputs Exceptions to
the error log, saving them to a stack, so we get notified again at the
end of the sync run.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
Message was stored to dstfolder, but we can't find it's UID. This means we can't
link current message to the one created in IMAP. So we just delete local message
and on next run we'll sync it back. Also fixed imap.savemessage description.
This was broken by e20d8b9679.
Signed-off-by: Vladimir Marek <vlmarek@volny.cz>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
It's not enough to place header after first newline, since this might break
multiline rfc0822 folded long header lines. Those are difined as CRLF followed
by white space. Instead we'll search for two successive CRLF sequences which
mark end of mail headers and place our header just before that.
Signed-off-by: Vladimir Marek <vlmarek@volny.cz>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
That makes OfflineIMAP to use exclamation mark (!) instead of colon for storing
messages. Such files can be written to windows partitions. But you will probably
loose compatibility with other programs trying to read the same Maildir.
Signed-off-by: Vladimir Marek <vladimir.marek@oracle.com>
Reviewed-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
Previously, we instanciated an MappedImapFolder, and would cleverly (too
cleverly?) invoke methods on it casting it to an IMAPFolder by calling
methods such as: self._mb.cachemessages(self) where self._MB is the class
IMAPFolder and self and instance of MappedImapFolder. If
e.g. cachemessages() invokes a method uidexists() which exists for
MappedImapFolder, but not directly in IMAPFolder, I am not sure if
Python would at some point attempt to use the method of the wrong class.
Also, this leads to some twisted thinking as our class would in same
cases act as an IMAPFolder and in some cases as an MappedImapFOlder and
it is not always clear if we mean REMOTE UID or LOCAL UID.
This commit simplifies the class, by a)doing away with the complex Mixin
construct and directly inheriting from IMAPFOlder (so we get all the
IMAPFOlder methods that we can inherit). We instantiate self._mb as a
new instance of IMAPFolder which represents the local IMAP using local
UIDs, separating the MappedIMAPFolder construct logically from the
IMAPFolder somewhat.
In the long run, I would like to remove self._mb completely and simply
override any method that needs overriding, but let us take small and
understandable baby steps here.
Reported-and-tested-by: Vincent Beffara <vbeffara@gmail.com>
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
Folder.savemessage() is supposed to return the new UID that a backend
assigned, and it BaseFolder.copymessageto() fails if we don't return a
non-negative number in the savemessage() there.
For some reason, the UIDMappedFolder was not returning anything in
savemessage, despite clearly stating in the code docs that it is
supposed to return a UID. Not sure how long this has already been the
case. This patch fixes the UIDMappedFolder to behave as it should.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
During a sync run, someone might remove or move IMAP messages. As we
only cache the list of UIDs in the beginning, we might be requesting
UIDs that don't exist anymore. Protect folder.IMAP.getmessage() against
the response that we get when we ask for unknown UIDs.
Also, if the server responds with anything else than "OK", (eg. Gmail
seems to be saying frequently ['NO', 'Dave I can't let you do that now']
:-) so we should also be throwing OfflineImapErrors here rather than
AssertionErrors.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
Previously we were attempting to save out mails according to
http://www.qmail.org/man/man5/maildir.html in 4 steps:
1 Create a unique filename
2 Do stat(tmp/<filename>). If it found a file, wait 2 sec and go back to 1.
3 Create and write the message to the tmp/<filename>.
4 Link from tmp/* to new/*
(we did step 2 up to 15 times) But as stated by
http://wiki1.dovecot.org/MailboxFormat/Maildir (see section 'Issues with
the specification'), this is a pointless approach, e.g. there are race
issues between stating that the filename does not exist and the actual
moving (when it might exist).
So, we can simplify the steps as suggested in the dovecot wiki and
tighten up our safety at the same time.
One improvement that we do is to open the file, guaranteeing that it did
not exist before in an atomic manner, thus our simplified approach is
really more secure than what we had before.
Also, we throw an OfflineImapError at MESSAGE level when the supposedly
unique filename already exists, so that we can skip this message and
still continue with other messages.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
MaildirFolder.messagelist[*]['filename'] was storing the absolute file
paths for all stored emails. While this is convenient, it wastes much
space, as the folder prefix is always the same and it is known to the
MaildirFolder. Just 40 chars in a folder with 100k mails waste >4MB of
space. Adapt the few locations where we need the full path to construct
it dynamically.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
We use getfullname() very often (thousands to millions), yet we
dynamically calculate the very same value over and over. Optimize this
by caching the value once and be done with it.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
we do:
for msgid in imapdata:
maxmsgid = max(long(msgid), maxmsgid)
and then basically immediately:
maxmsgid = long(imapdata[0])
throwing away the first assignment although the first method of
assigning is the correct one. The second had been forgotten to be
removed when we introduced the above iteration. This bug would fix a
regression with those broken ZIMBRA servers that send multiple EXISTS
replies.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
All months names are 3-letter abbreviated, but accidentally June and
July slipped through. Thanks to the heads up by
Philipp Kern <pkern@debian.org>.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
The semaphorewait()/waitforthread() logic is usefull for IMAP starting
connections. We actually use it in imapserver only.
This patch removes the over-engineered factorized methods. It tend to simplify
the code by cleaning out a chain of two direct calls with no other processes.
Reviewed-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
We were outputting full message bodies to the debug log (often stderr),
and then again (as they go over the imaplib2 wire, imaplib logs
everything too). Not only is quite a privacy issue when sending in debug
logs but it can also freeze a console for quite some time. Plus it
bloats debug logs A LOT.
Only output the first and last 100 bytes of each message body to the
debug log (we still get the full body from imaplib2 logging). This
limits privacy issues when handing the log to someone else, but usually
still contains all the interesting bits that we want to see in a log.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
The syntax was not right, and deleting messages from the LocalStatus
failed. (We passed in the full list of uids and we need to pass in one
uid at a time (as a tuple). Deleting messages works now.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
Throw an OfflineImapError when SELECTing a folder is unsuccessful and
bail out with a FOLDER serverity. In accounts.py catch all
OfflineImapErrors and either just log the error and skip the folder or
bubble it up if it's severe.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
Make the folder classes use uidexists() more. Add some code
documentation while going through.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
Test if sqlite is multithreading-safe and bail out if not. sqlite
versions since at least 2008 are.
But, as it still causes errors when 2
threads try to write to the same connection simultanously (We get a
"cannot start transaction within a transaction" error), we protect
writes with a per class, ie per-connection lock. Factor out the retrying
to write when the database is locked.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
doautosave was a useless variable before (it was *always* 1). So we
remove the self.dofsync variable and store in doautosave whether we
should fsync as often as possible (which really hurts performance).
The sqlite backend could (at one point) use the doautosave variable to
determine if it should autocommit after each modification.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
Based on patches by Stewart Smith, updated by Rob Browning.
plus:
- Inherit LocalStatusSQLFolder from LocalStatusFolder
This lets us remove all functions that are available via our ancestors
classes and are not needed.
- Don't fail if pysql import fails. Fail rather at runtime when needed.
- When creating the db file, create a metadata table which contains the
format version info, so we can upgrade nicely to other formats.
- Create an upgrade_db() function which allows us to upgrade from any
previous file format to the current one (including plain text)
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
When our LocalStatus cache is corrupt, ie e.g. it contains lines not in
the form number:number, we would previously just raise a ValueError
stating things like "too many values". In case we encounter clearly
corrupt LocalStatus cache entries, clearly raise an exception stating
the filename and the line, so that people can attempt to repair it.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
This function will need much more "robustifying", but the very least we
can do is to print the file name and line that are giving trouble.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
Add some comments how the data structures actually look like.
Describe the function properly, and make sure we only hold on to the
data connection as quickly as possible.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
This was in the code for a very long time, it seems.
Remove one instance, no functional changes.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
Just clean up lines which end in whitespaces.
Also adapt the copyright to the current year while touching the file.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
In order to optimize performance, we fold the 1st and 2nd pass of our
sync strategy into one. They were essentially doing the same thing:
uploading a message to the other side. The only difference was that in
one case we have a negative UID locally, and in the other case, we have
a positive one already.
This saves some time, as we don't have to run through that function on
IMAP servers anyway (they always have positive UIDs), and 2nd were we
stalling further copying until phase 1 was finished. So uploading a
single new message would prevent us from starting to copy existing
regular messages.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
For each folder we were making a second IMAP request asking for the
latest UID and compared that with the highest UID in our
statusfolder. This catched the case that 1 mail has been deleted by
someone else and another one has arrived since we checked, so that the
total number of mails appears to not have changed.
We don't capture anymore this case in the quickchanged() case.
It improves my performance from 8 to about 7.5 seconds per check (with lots of
variation) and we would benefit even more in the IMAP<->IMAP case as we do one
additional IMAP lookup per folder on each side then.
Do cleanups on whitespaces while in this file.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
quickchanged() was iterating a lot, make use of some of the helper
functions that had been introduced recently and document the function a
bit better. No functional change.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
getmessagelist() is slow for the mapped UID case, so replace some of its
occurences with calls that are optimized for this case, ie
getmessagecount() and uidexists().
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Reviewed-and-tested-by: Vincent Beffara <vbeffara@ens-lyon.fr>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
