We were outputting full message bodies to the debug log (often stderr),
and then again (as they go over the imaplib2 wire, imaplib logs
everything too). Not only is quite a privacy issue when sending in debug
logs but it can also freeze a console for quite some time. Plus it
bloats debug logs A LOT.
Only output the first and last 100 bytes of each message body to the
debug log (we still get the full body from imaplib2 logging). This
limits privacy issues when handing the log to someone else, but usually
still contains all the interesting bits that we want to see in a log.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
Add a FAQ entry about non-verifying SSL certificates by default,
and another about how to generate a certificates file to feed to
the 'sslcacertfile' repository configuration item.
Signed-off-by: Daniel Shahaf <d.s@daniel.shahaf.name>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
The syntax was not right, and deleting messages from the LocalStatus
failed. (We passed in the full list of uids and we need to pass in one
uid at a time (as a tuple). Deleting messages works now.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
The SigListener class was used to queue folders that we need to sync and
to receive "resync" and "abort" signals. It was undocumented and weird
and we had to pass "siglisteners" through the whole program.
Simply do away with it, and make 2 functions in the Account() class:
set_abort_event and get_abort_event which can be used to set and check
for such signals. This way we do not need to pass siglisteners all over
the place. Tested Blinkenlights and TTYUI uis to make sure that SIGUSR1
and SIGUSR2 actually still work.
Document those signals in MANUAL.rst. They were completly undocumented.
This simplifies the code and interdependencies by passing less stuff
around. Removes an undocumented and weirdly named class.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
Throw an OfflineImapError when SELECTing a folder is unsuccessful and
bail out with a FOLDER serverity. In accounts.py catch all
OfflineImapErrors and either just log the error and skip the folder or
bubble it up if it's severe.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
Use two %s in the message for both string parameters.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
Make the folder classes use uidexists() more. Add some code
documentation while going through.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
Depending on the configuration we use the plain text or the new
experimental sqlite backend for the LocalStatus cache. Make plain text
the default status backend but allow people to configure
status_backend=sqlite in their [Account ...] section.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
Test if sqlite is multithreading-safe and bail out if not. sqlite
versions since at least 2008 are.
But, as it still causes errors when 2
threads try to write to the same connection simultanously (We get a
"cannot start transaction within a transaction" error), we protect
writes with a per class, ie per-connection lock. Factor out the retrying
to write when the database is locked.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
Make getfolders() invoke getfolder() for each folder rather than
duplicating code. Also add a forgetfolders() implementation.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
doautosave was a useless variable before (it was *always* 1). So we
remove the self.dofsync variable and store in doautosave whether we
should fsync as often as possible (which really hurts performance).
The sqlite backend could (at one point) use the doautosave variable to
determine if it should autocommit after each modification.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
Python's new style classes derive from object and str(class().__class__)
will return a slightly different format. class().__class.__name__ will
still work for both old and new style classes, so use that instead.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
Based on patches by Stewart Smith, updated by Rob Browning.
plus:
- Inherit LocalStatusSQLFolder from LocalStatusFolder
This lets us remove all functions that are available via our ancestors
classes and are not needed.
- Don't fail if pysql import fails. Fail rather at runtime when needed.
- When creating the db file, create a metadata table which contains the
format version info, so we can upgrade nicely to other formats.
- Create an upgrade_db() function which allows us to upgrade from any
previous file format to the current one (including plain text)
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
A typo prevented us from enforcing singlethreading mode when selecting debugging.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
Using threading._VERBOSE=1 is broken since python 2.6 till at least
python 3.2, (http://bugs.python.org/issue4188) so we can't use it for
our thread debugging.
Remove the usage of threading._VERBOSE, and implement a "light thread
debug log" that for now outputs information when a new thread is being
registered and when it is being unregistered. I am sure we will be able
to add more thread debugging information over the time.
Besides '-d thread' this will re-enable the usage of -d 'all' for the
most verbose debugging of all categories.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
When our LocalStatus cache is corrupt, ie e.g. it contains lines not in
the form number:number, we would previously just raise a ValueError
stating things like "too many values". In case we encounter clearly
corrupt LocalStatus cache entries, clearly raise an exception stating
the filename and the line, so that people can attempt to repair it.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
This should get rid of intermittent network failures, but lets us bail
out on permanent errors.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
By aborting the account syncing, the looping and logging an error
message. We will introduce a ui.error() rather than a ui.warn() function
which saves all Exceptions in a Queue and outputs them at the end of the
program.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
In case we misconfigured a server name or are otherwise offline, a
socket.gaierror will be raised when attempting to connect. We catch that
case and raise an OfflineImapError with severity ERROR.REPO, meaning we
should stop syncing this account and continue with the next one.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
This Exception can be thrown whenever a sync error occurs. It is used
for outputting sensible error messages to the user and it denotes a
"severity", it can tell offlineimap if we need to abort a message, a
folder, a repo sync, or whether we should indeed abort immediately.
The exception is not yet used in the code.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
Currently, account.syncrunner() has 2 separate duplicated code paths
depending on whether we want to autorefresh after some waiting perios
or not. Unify those code paths by setting "looping = False" in case
self.refeshperiod == 0 after the first run. Behavior is identical to
before.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
This commit enables true 1-way syncing between repositories. This has
often been demanded for backup purposes when you do not want to cause
accidental modifications of your backup that would be propagated to the
other side.
This has been implemented by allowing to configure a Repository as
'readonly' to forbid any modification on it.
'readonly' applies to all the type of repositories.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
This debug type will always be enabled whenever any debugging is enables
and it outputs debug messages that cannot be categorized among any of
imap, maildir (e.g. things that concern the sync logic).
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
Improve the code documentation (still much more to do) and also add some
more meat to the structure of the developer documentation.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
This function will need much more "robustifying", but the very least we
can do is to print the file name and line that are giving trouble.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
Allow leading and trailing spaces in folder names specified on the
command line.
Reviewed-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Dan Christensen <jdc@uwo.ca>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
in accounts.sync() we would holdordropconnections() after each sync. But
depending on the repository configuration that might imply that
offlineimap tries to keep the same connections. But when a sync failed,
e.g. after a user had his computer suspended, it might be that our
connections that we have are worthless. So definitely drop them after a
failed sync.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
Add some comments how the data structures actually look like.
Describe the function properly, and make sure we only hold on to the
data connection as quickly as possible.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
This was in the code for a very long time, it seems.
Remove one instance, no functional changes.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
uncritical patch, but we can make the code a bit shorter so why not.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
So we can simply hand a repository instance to error messages rather than
having to call Repository().getname() all the time.
This is not used yet.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
So we can simply hand an account instance to error messages rather than
having to call Account().getname() all the time.
This is not used yet.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
Just clean up lines which end in whitespaces.
Also adapt the copyright to the current year while touching the file.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
The docs still need some meat, but the infrastructure is in place. THis
allows us to generate the nice looking API documentation that many
python projects already have. We should document our API better, providing
an overview of the functionality available.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
