When logging to a file using the -l switch, we would still write an initial
banner to the file. This was never intended. Quiet should be really quiet
unless it experiences an error. Simplify the logging statement, to do nothing
if logevel is set to "WARNING" aka quiet.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
While looking at the code to investigate if an why we sometimes don't
seem to honor the write lock, I made it use the more modern "with lock:"
pattern.
Still have not found out how we could ever be using 2 instances of the
LocalStatusFolder for the same folder.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
If we throw an OfflineImapError in case of the Repository()
initialization, we display the nice error message and exit rather
than bomb out with a traceback. Misconfiguring a repository name in
the configuration file is now nicely pointed out to the user.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
When misconfiguring OLI, e.g. by specifying a repository name that was
not configured anywhere, we would bomb out with cryptic "NoSectionError".
Throw OfflineImapError that explains what has happened. We still need to
avoid throwing exceptions with Tracebacks here though.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
If 'readonly' is True, folders shouldn't be created (regardless of
'createfolders' option). With old behavior, instead folders were always created
when 'readonly' is True (even if 'createfolders' was also False), which is a
serious bug (offlineimap was creating folders in all read-only repositories).
'createfolders' should only play a role if 'readonly' is False, in which case
folders should only be created if 'createfolders' is True.
Submitted-by: Vladimir Nesov <robotact@gmail.com>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
This will allow our callers who are capable of dealing with
readonly folders to properly detect this condition and act
accordingly.
One example is Gmail's "Chats" folder that is read-only,
but contains logs of the quick chats.
Minor Changelog improvements.
Tested-by: Abdó Roig-Maranges <abdo.roig@gmail.com>
Signed-off-by: Eygene Ryabinkin <rea@codelabs.ru>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
As Gmail was only announcing the presence of the UIDPLUS extension
after we logged in, and we were then only getting server
capabilities before, a hack was introduced that checked the
existence of an APPENDUID reply, even if the server did not claim
to support it.
However, John Wiegley reports problems, where the APPENDUID would
be None, and we attempt to go this path (it seems that imaplib2
returns [None] if there is no such reply, so our test here for "!="
might fail. Given that this is an undocumented imaplib2 function
anyway, and we do fetch gmail capabilities after authentication,
this hack should no longer be necessary.
We had problems there earlier, where imapobj.response() would
return [None] although we had received a APPENDUID response from
the server, this might need more debugging and testing.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
By default OfflineImap propagates new folders in both
directions. Sometimes this is not what you want. E.g. you might want
new folders on your IMAP server to propagate to your local MailDir,
but not the other way around. The 'readonly' setting on a repository
will not help here, as it prevents any change from occuring on that
repository. This is what the `createfolders` setting is for. By
default it is `True`, meaning that new folders can be created on this
repository. To prevent folders from ever being created on a
repository, set this to `False`. If you set this to False on the
REMOTE repository, you will not have to create the `Reverse
nametrans`_ rules on the LOCAL repository.
Also implement a test for this
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Reported by sharat87 in https://github.com/spaetz/offlineimap/pull/38,
he would often get an unhandled Exception when trying to
releaseconnection() a connection that was not in the pool of
connections.
The reason this could happen is that when folder.IMAP.quickchanged()
raises an Exception in select(), we would release the connection in the
"except" handling, and than release the same connection in the "finally"
clause, which led to the error. The right thing is to only release the
connection once, of course.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
As reported by James Cook, we would not check the fingerprint of the SSL
server, as we were looking for the 'ssl' module in locals() rather than
globals(). Ooops!
Rather than using globals() though, I simply remove the by-now
superfluous check. We now rely on python2.6 and we unconditionally
import the SSL module in any case, so it needs to be there.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
The warn() method tries to set the color to red. This leads to a garbled
tty after endwin() has been called. So lets simply use the UIBase
implementation.
Signed-off-by: Christoph Höger <christoph.hoeger@tu-berlin.de>
Somehow we failed if no dry-run setting had been specified in the config
file. This got caught thanks to extending the test suite with a stock
configuration.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
In 2.6 all logging classes are not the new-style ones, so they
have no mro() method and, thus, we can't use super() for them.
Since CursesLogHanler is singly-inherited method, there will
be no problems in usage of the explicit superclass name.
Signed-off-by: Eygene Ryabinkin <rea@codelabs.ru>
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
We autodetect the folder separator on IMAP servers and ignore any 'sep'
setting in the repository section for IMAP servers. Detect if there is
such a setting and warn the user about it.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Previously folderfilters had to match both the local AND remote
name which caused unwanted behavior in combination with nametrans
rules. Make it operate on the untranslated remote names now and
clarify in the command line option help text.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
This reverts commit 4d47f7bf3c.
This is one of two candidates for introducing the instabilities that
John Wiegley observed. We need to reintroduce with careful testing only.
The original patch has been mostly reverted.
This reverts commit 47390e03d6.
It is one of two potential candidates for the APPENDUID
regression that John Wiegley reported. We need to examine this
carefully before reintroducing this patch.
Resolved Changelog.draft.rst conflict.
Prevent savemessage(), and savemessageflags() to occur in dryrun mode in
all backends. Still need to protect against deletemessage().
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
IMAP, Maildir, and LocalStatus abort if in dry-run mode. IMAP and Maildir
will log that they "would have" created a new folder.
This will probably fail later on as we can not cache messagelists on
folder that don't exist, so --dry-run is not yet safe when new folders
have been created.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
1) Set attribute self.dryrun depending on whether we are in dry-run mode.
2) Don't actually call hooks in --dry-run (just log what you would
invoke
3) Don't write out the mbnames file in --dry-run mode.
Repository, and Folder levels still need to be protected in dry-run mode
as of now.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
And set the [general]dry-run=True setting if yes. It is not used yet.
Also set ui.dryrun to True so we can output what WE WOULD HAVE DONE in
dryrun mode.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
A convenience helper function that allows to set a configuration value
if the user has not explicitly configured anything ie the option does
not exist yet in the configuration. It won't do anything, if the option
exists.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Bail out with a better Exception and error text. The whole mapped
UID situation needs to be improved though.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
If we cannot identify the new UID after a sendmessage(), log a better error
message, including the server response for better debugging.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
While improving the test suite, I noticed that we would not create folders on
the remote in some cases when we should (yay for test suites!). This is because
we were testing the untransposed LOCAL foldername and check if it existed on
the remote side when deciding whether we should potentially create a new folder.
Simplify the code by transposing the LOCAL folder names in dst_hash, saving us
to create another confusing "newsrc" temp variable. Make the code a bit more
readable by using dst_name_t to indicate we operate a transposed folder name.
This now passes test 03 (using invalid nametrans rules) when test 03 would pass
before.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Rename variable src_name to src_name_t to indicate that it is the transposed
name. Also rather than testing the hash thingie, we can simply test for
"if source_name_t in dst_folders" now.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
This allows to compare folders directly with strings. It also allows
constructs such as "if 'moo' in repo.getfolders()".
See the code documentation for the exact behavior (it basically is equal if
it's the same instance *or* a string matching the untranslated folder name.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
By default we sort folders alphabetically (for IMAP) according to their
transposed names. For python3, we need to bend a bit backwards to still
allow the use of a cmp() function for foldersort. While going through, I
discovered that we never sort folders for Maildir.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
There is no need to cast 0 to 'long' even if we want to compare it to long
numbers in modern pythons.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
This won't work in python3 anymore, so just use sorted() when needed.
In one case, we could remove the sort() completely as were were sanity checking
one line above, that we only having one UID as response which makes sorting
unneeded.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
class BaseRepository(object, CustomConfig.ConfigHelperMixin):
led to TypeError: Cannot create a consistent method resolution
order (MRO) for bases ConfigHelperMixin, object. Switching the inherited
classes helps.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Replace low-level thread.get_ident() with threading.currentThread().ident.
This works both in python2.6 and python3. (thread is renamed _thread and its
direct use is not recommended)
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
all we want to know is if we got some string'ish type and testing for isinstance
'basestring' is sufficient for that. Remove the import.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
All we want to do here is to test whether we got a string'ish type or a list
(literal), so testing for basestring will be fine.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
'set' is builtin since python2.6, so remove the imports. Also 'ssl' exists
since 2.6 and has everything we need, so no need for conditional import
tests here anymore.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
