dotfiles/zsh/modules/syntax-highlighting/external/tests/test-highlighting.zsh
2018-04-05 13:06:54 +02:00

194 lines
7.6 KiB
Bash
Executable File

#!/usr/bin/env zsh
# -------------------------------------------------------------------------------------------------
# Copyright (c) 2010-2016 zsh-syntax-highlighting contributors
# All rights reserved.
#
# Redistribution and use in source and binary forms, with or without modification, are permitted
# provided that the following conditions are met:
#
# * Redistributions of source code must retain the above copyright notice, this list of conditions
# and the following disclaimer.
# * Redistributions in binary form must reproduce the above copyright notice, this list of
# conditions and the following disclaimer in the documentation and/or other materials provided
# with the distribution.
# * Neither the name of the zsh-syntax-highlighting contributors nor the names of its contributors
# may be used to endorse or promote products derived from this software without specific prior
# written permission.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR
# IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
# FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR
# CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER
# IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
# OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
# -------------------------------------------------------------------------------------------------
# -*- mode: zsh; sh-indentation: 2; indent-tabs-mode: nil; sh-basic-offset: 2; -*-
# vim: ft=zsh sw=2 ts=2 et
# -------------------------------------------------------------------------------------------------
# Check an highlighter was given as argument.
[[ -n "$1" ]] || {
echo >&2 "Bail out! You must provide the name of a valid highlighter as argument."
exit 2
}
# Check the highlighter is valid.
[[ -f ${0:h:h}/highlighters/$1/$1-highlighter.zsh ]] || {
echo >&2 "Bail out! Could not find highlighter ${(qq)1}."
exit 2
}
# Check the highlighter has test data.
[[ -d ${0:h:h}/highlighters/$1/test-data ]] || {
echo >&2 "Bail out! Highlighter ${(qq)1} has no test data."
exit 2
}
# Set up results_filter
local results_filter
if [[ $QUIET == y ]]; then
if type -w perl >/dev/null; then
results_filter=${0:A:h}/tap-filter
else
echo >&2 "Bail out! quiet mode not supported: perl not found"; exit 2
fi
else
results_filter=cat
fi
[[ -n $results_filter ]] || { echo >&2 "Bail out! BUG setting \$results_filter"; exit 2 }
# Load the main script.
# While here, test that it doesn't eat aliases.
print > >($results_filter | ${0:A:h}/tap-colorizer.zsh) -r -- "# global (driver) tests"
print > >($results_filter | ${0:A:h}/tap-colorizer.zsh) -r -- "1..1"
alias -- +plus=plus
alias -- _other=other
original_alias_dash_L_output="$(alias -L)"
. ${0:h:h}/zsh-syntax-highlighting.zsh
if [[ $original_alias_dash_L_output == $(alias -L) ]]; then
print -r -- "ok 1 # 'alias -- +foo=bar' is preserved"
else
print -r -- "not ok 1 # 'alias -- +foo=bar' is preserved"
exit 1
fi > >($results_filter | ${0:A:h}/tap-colorizer.zsh)
# Overwrite _zsh_highlight_add_highlight so we get the key itself instead of the style
_zsh_highlight_add_highlight()
{
region_highlight+=("$1 $2 $3")
}
# Activate the highlighter.
ZSH_HIGHLIGHT_HIGHLIGHTERS=($1)
# Runs a highlighting test
# $1: data file
run_test_internal() {
local tests_tempdir="$1"; shift
local srcdir="$PWD"
builtin cd -q -- "$tests_tempdir" || { echo >&2 "Bail out! cd failed: $?"; return 1 }
echo "# ${1:t:r}"
# Load the data and prepare checking it.
PREBUFFER= BUFFER= ;
. "$srcdir"/"$1"
# Check the data declares $PREBUFFER or $BUFFER.
[[ -z $PREBUFFER && -z $BUFFER ]] && { echo >&2 "Bail out! Either 'PREBUFFER' or 'BUFFER' must be declared and non-blank"; return 1; }
# Check the data declares $expected_region_highlight.
(( ${#expected_region_highlight} == 0 )) && { echo >&2 "Bail out! 'expected_region_highlight' is not declared or empty."; return 1; }
# Process the data.
region_highlight=()
_zsh_highlight
# Overlapping regions can be declared in region_highlight, so we first build an array of the
# observed highlighting.
local -A observed_result
for ((i=1; i<=${#region_highlight}; i++)); do
local -a highlight_zone; highlight_zone=( ${(z)region_highlight[$i]} )
integer start=$highlight_zone[1] end=$highlight_zone[2]
if (( start < end )) # region_highlight ranges are half-open
then
(( --end )) # convert to closed range, like expected_region_highlight
(( ++start, ++end )) # region_highlight is 0-indexed; expected_region_highlight is 1-indexed
for j in {$start..$end}; do
observed_result[$j]=$highlight_zone[3]
done
else
# noop range; ignore.
fi
unset start end
unset highlight_zone
done
# Then we compare the observed result with the expected one.
echo "1..${#expected_region_highlight}"
for ((i=1; i<=${#expected_region_highlight}; i++)); do
local -a highlight_zone; highlight_zone=( ${(z)expected_region_highlight[$i]} )
local todo=
integer start=$highlight_zone[1] end=$highlight_zone[2]
# Escape # as ♯ since the former is illegal in the 'description' part of TAP output
local desc="[$start,$end] «${BUFFER[$start,$end]//'#'/♯}»"
# Match the emptiness of observed_result if no highlighting is expected
[[ $highlight_zone[3] == NONE ]] && highlight_zone[3]=
[[ -n "$highlight_zone[4]" ]] && todo="# TODO $highlight_zone[4]"
for j in {$start..$end}; do
if [[ "$observed_result[$j]" != "$highlight_zone[3]" ]]; then
print -r -- "not ok $i - $desc - expected ${(qqq)highlight_zone[3]}, observed ${(qqq)observed_result[$j]}. $todo"
continue 2
fi
done
print -r -- "ok $i - $desc${todo:+ - }$todo"
unset desc
unset start end
unset todo
unset highlight_zone
done
}
# Run a single test file. The exit status is 1 if the test harness had
# an error and 0 otherwise. The exit status does not depend on whether
# test points succeeded or failed.
run_test() {
# Do not combine the declaration and initialization: «local x="$(false)"» does not set $?.
local __tests_tempdir
__tests_tempdir="$(mktemp -d)" && [[ -d $__tests_tempdir ]] || {
echo >&2 "Bail out! mktemp failed"; return 1
}
typeset -r __tests_tempdir # don't allow tests to override the variable that we will 'rm -rf' later on
{
# Use a subshell to isolate tests from each other.
# (So tests can alter global shell state using 'cd', 'hash', etc)
{
# These braces are so multios don't come into play.
{ (run_test_internal "$__tests_tempdir" "$@") 3>&1 >&2 2>&3 } | grep \^
local ret=$pipestatus[1] stderr=$pipestatus[2]
if (( ! stderr )); then
# stdout will become stderr
echo "Bail out! output on stderr"; return 1
else
return $ret
fi
} 3>&1 >&2 2>&3
} always {
rm -rf -- "$__tests_tempdir"
}
}
# Process each test data file in test data directory.
integer something_failed=0
ZSH_HIGHLIGHT_STYLES=()
for data_file in ${0:h:h}/highlighters/$1/test-data/*.zsh; do
run_test "$data_file" | tee >($results_filter | ${0:A:h}/tap-colorizer.zsh) | grep -v '^not ok.*# TODO' | grep -Eq '^not ok|^ok.*# TODO' && (( something_failed=1 ))
(( $pipestatus[1] )) && exit 2
done
exit $something_failed