Grobi

Makefile

@@ -4,6 +4,10 @@ tmux:
 	ln -s ~/.dotfiles/tmux ~/.tmux
 	ln -s ~/.dotfiles/tmux/.tmux.conf ~/.tmux.conf
 
+grobi:
+	rm ~/.config/grobi.conf || true
+	ln -s ~/.dotfiles/grobi/grobi.conf ~/.config/grobi.conf
+
 vim:
 	ln -s ~/.dotfiles/vim ~/.vim
 	ln -s ~/.dotfiles/vim/.vimrc ~/.vimrc
@@ -48,7 +52,7 @@ i3: dep
 	ln -s ~/.dotfiles/i3 ~/.config/i3
 	cd i3/conf/ && ./build.sh
 
-.PHONY: clean zsh git vim tmux i3 albert gnupg
+.PHONY: clean zsh git vim tmux i3 albert gnupg grobi
 clean:
 	rm -rf ~/.vim ~/.vimrc ~/.tmux ~/.tmux.conf ~/.gitconfig ~/.config/i3
 	rm -rf ~/.zshrc ~/.zimrc ~/.zim ~/.zlogin ~/.compton.conf

grobi/grobi.conf

@@ -0,0 +1,148 @@
+# vim:ft=yaml
+
+# The commands listed in execute_after will be run after an output
+# configuration was changed.
+# pentablet uses 200% cpu after displays changed. So we kill it.
+execute_after:
+  - i3-msg exec setxkbmap de
+  - polybar-msg cmd restart
+  - "pkill -9 pentablet || true"
+
+# if anything goes wrong (connection the X server died or some other error),
+# run these commands before exiting
+on_failure:
+  - xrandr --auto
+
+# These are the rules grobi tries to match to the current output configuration.
+# The rules are evaluated top to bottom, the first matching rule is applied and
+# processing stops.
+#
+# The rules belowe are written for a typical Laptop in mind, which hase several
+# external connectors (HDMI2, HDMI3) in addition to the internal display
+# (LVDS1). It may even be placed in a Docking Station, which adds more outputs
+# that aren't present outside it.
+rules:
+
+  # This is a rule for a docking station.
+  - name: Docking Station
+    # grobi takes the list of all the
+    # outputs xrandr returns and verifies that HDMI2 and HDMI3 are connected, and
+    # DP2-2 is present (but may be disconnected).
+    outputs_connected:
+      - DP1-1-BNQ-30887-21573-BenQ GL2450H-ACB00126019
+      - DP1-2-BNQ-30887-21573-BenQ GL2450H-X4F00171019
+
+    # when this rule matches, HDMI2 and HDMI3 are activated in their default
+    # resolution and set besides each other in a typical dual-monitor
+    # configuration: left is HDMI2, right is HDMI3
+    configure_row:
+        - DP1-1
+        - DP1-2
+
+    # atomic instructs grobi to only call xrandr once and configure all the
+    # outputs. This does not always work with all graphic cards.
+    atomic: false
+
+    # For the output HDMI3, the flag --primary will be added to the xrandr
+    # call, so that e.g. the tray icons are displayed on this monitor (requires
+    # the window manager to do this).
+    primary: DP1-1
+
+    # Additional commands can be specified per rule, in this case we make sure
+    # that xautolock is enabled and locks the screen after a while.
+    execute_after:
+      - xautolock -enable
+      - nmcli c up Kabelgebundene\ Verbindung\ 2
+      - rfkill block wifi
+      - bluetoothctl power on
+      - xrandr --output DP1-1 --set "Broadcast RGB" "Full"
+      - xrandr --output DP1-2 --set "Broadcast RGB" "Full"
+      - xcalib -o 0 ~/Nextcloud/Ablage/benq.icc
+      - xcalib -o 1 ~/Nextcloud/Ablage/benq.icc
+      - systemctl --user start redshift-gtk.service
+
+  - name: "KIT 50.34 -118"
+
+    # We only want to match the TV, so we identify it with its monitor ID. In order to get the
+    # monitor ID, we connect the TV and run `grobi show`, which lists all connected monitors
+    # with their monitor ID (which consists of a three letter manufacturer code, a product and
+    # a serial number). We can now match the connected outputs with this monitor ID.
+    # We specify the monitor ID after the port with a dash in between those two values.
+    outputs_connected:
+      - eDP1
+      - HDMI2-SNY-33283-16843009-SONY PJ-
+
+    configure_row:
+        - eDP1
+        - HDMI2@1920x1200
+
+    primary: eDP1
+    atomic: false
+
+    execute_after:
+      - xautolock -disable
+      - chromium "https://s.kit.edu/50.34-118"
+      - systemctl --user stop redshift-gtk.service
+
+  - name: "KIT 50.34 -108"
+
+    # We only want to match the TV, so we identify it with its monitor ID. In order to get the
+    # monitor ID, we connect the TV and run `grobi show`, which lists all connected monitors
+    # with their monitor ID (which consists of a three letter manufacturer code, a product and
+    # a serial number). We can now match the connected outputs with this monitor ID.
+    # We specify the monitor ID after the port with a dash in between those two values.
+    outputs_connected:
+      - eDP1
+      - HDMI2-SNY-33795-16843009-SONY PJ-
+
+    configure_row:
+        - eDP1
+        - HDMI2@1280x720
+
+    primary: eDP1
+    atomic: false
+
+    execute_after:
+      - xautolock -disable
+      - chromium "https://s.kit.edu/50.34-108"
+      - systemctl --user stop redshift-gtk.service
+
+
+  # - name: TV
+  #
+  #   # We only want to match the TV, so we identify it with its monitor ID. In order to get the
+  #   # monitor ID, we connect the TV and run `grobi show`, which lists all connected monitors
+  #   # with their monitor ID (which consists of a three letter manufacturer code, a product and
+  #   # a serial number). We can now match the connected outputs with this monitor ID.
+  #   # We specify the monitor ID after the port with a dash in between those two values.
+  #   outputs_connected:
+  #     - HDMI1-SAM-2618-808661557
+  #
+  #   configure_single: HDMI1
+  #
+  #   execute_after:
+  #     - xautolock -disable
+
+
+  # This is a rule for mobile computing, i.e. outside of the docking station defined above.
+  - name: Mobile
+
+    # In order to match, the outputs HDMI2 and HDMI3 may be present, but must be disconnected.
+    outputs_disconnected:
+      - DP1-1
+      - DP1-2
+
+    # Here, only the internal LCD panel is activated.
+    configure_single: eDP1
+
+    execute_after:
+      - xautolock -enable
+      - rfkill unblock wifi
+      - xcalib -o 0 ~/Nextcloud/Ablage/x380.icm
+      - systemctl --user start redshift-gtk.service
+
+  # If none of the rules above match, it's a good idea to have a fallback rule
+  # which enables an output device that is always present, so you can debug
+  # what's going on.
+  - name: Fallback
+    configure_single: eDP1