docker-offlineimap/offlineimap.conf
Nicolas Sebrecht 03eafcc00f offlineimap.conf: normalize style and format
- improve style and reading for the eyes
- improve wording
- add minor comments
- remove on duplicate option
- give location of each +1 section

Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
2015-01-14 17:23:53 +01:00

897 lines
32 KiB
Plaintext

# Offlineimap sample configuration file
# This file documents *all* possible options and can be quite scary.
# Looking for a quick start? Take a look at offlineimap.conf.minimal.
# More details can be found in the included user documention, which is
# also available at: http://docs.offlineimap.org/en/latest/
# NOTE 1: Settings generally support python interpolation. This means
# values can contain python format strings which refer to other values
# in the same section, or values in a special DEFAULT section. This
# allows you for example to use common settings for multiple accounts:
#
# [Repository Gmail1]
# trashfolder: %(gmailtrashfolder)s
#
# [Repository Gmail2]
# trashfolder: %(gmailtrashfolder)s
#
# [DEFAULT]
# gmailtrashfolder = [Gmail]/Papierkorb
#
# would set the trashfolder setting for your German Gmail accounts.
# NOTE 2: Above feature implies that any '%' needs to be encoded as '%%'
# NOTE 3: Any variable that is subject to the environment variables
# ($NAME) and tilde (~username/~) expansions will receive tilde
# expansion first and only after the environment variable will be
# expanded in the resulting string. This behaviour is intentional
# as it coincides with typical shell expansion strategy.
##################################################
# General definitions
##################################################
[general]
# This specifies where OfflineIMAP is to store its metadata.
# This directory will be created if it does not already exist.
#
# Tilde and environment variable expansions will be performed.
#
#metadata = ~/.offlineimap
# This option stands in the [general] section.
#
# This variable specifies which accounts are defined. Separate them with commas.
# Account names should be alphanumeric only. You will need to specify one
# section per account below. You may not use "general" for an account name.
#
# Always use ASCII characters only.
#
accounts = Test
# This option stands in the [general] section.
#
# Offlineimap can synchronize more than one account at a time. If you want to
# enable this feature, set the below value to something greater than 1. To
# force it to synchronize only one account at a time, set it to 1.
#
# NOTE: if you are using autorefresh and have more than one account, you must
# set this number to be >= to the number of accounts you have; since any given
# sync run never "finishes" due to a timer, you will never sync your additional
# accounts if this is 1.
#
#maxsyncaccounts = 1
# This option stands in the [general] section.
#
# You can specify one or more user interface. OfflineIMAP will try the first in
# the list, and if it fails, the second, and so forth.
#
# The pre-defined options are:
# Blinkenlights -- A fancy (terminal) interface
# TTYUI -- a text-based (terminal) interface
# Basic -- Noninteractive interface suitable for cron'ing
# Quiet -- Noninteractive interface, generates no output
# except for errors.
# MachineUI -- Interactive interface suitable for machine
# parsing.
#
# You can override this with a command-line option -u.
#
#ui = basic
# This option stands in the [general] section.
#
# If you try to synchronize messages to a folder which the IMAP server
# considers read-only, OfflineIMAP will generate a warning. If you want
# to suppress these warnings, set ignore-readonly to yes. Read-only
# IMAP folders allow reading but not modification, so if you try to
# change messages in the local copy of such a folder, the IMAP server
# will prevent OfflineIMAP from propagating those changes to the IMAP
# server. Note that ignore-readonly is UNRELATED to the "readonly"
# setting which prevents a repository from being modified at all.
#
#ignore-readonly = no
########## Advanced settings
# This option stands in the [general] section.
#
# You can give a Python source filename here and all config file
# python snippets will be evaluated in the context of that file.
# This allows you to e.g. define helper functions in the Python
# source file and call them from this config file. You can find
# an example of this in the manual.
#
# Tilde and environment variable expansions will be performed.
#
#pythonfile = ~/.offlineimap.py
# This option is in the [general] section.
#
# By default, OfflineIMAP will not exit due to a network error until the
# operating system returns an error code. Operating systems can sometimes take
# forever to notice this. Here you can activate a timeout on the socket. This
# timeout applies to individual socket reads and writes, not to an overall sync
# operation. You could perfectly well have a 30s timeout here and your sync
# still take minutes.
#
# Values in the 30-120 second range are reasonable.
#
# The default is to have no timeout beyond the OS. Times are given in seconds.
#
#socktimeout = 60
# This option stands in the [general] section.
#
# By default, OfflineIMAP will use fsync() to force data out to disk at
# opportune times to ensure consistency. This can, however, reduce performance.
# Users where /home is on SSD (Flash) may also wish to reduce write cycles.
# Therefore, you can disable OfflineIMAP's use of fsync(). Doing so will come
# at the expense of greater risk of message duplication in the event of a system
# crash or power loss. Default is true. Set it to false to disable fsync.
#
#fsync = true
##################################################
# Mailbox name recorder
##################################################
[mbnames]
# OfflineIMAP can record your mailbox names in a format you specify.
# You can define the header, each mailbox item, the separator,
# and the footer. Here is an example for Mutt.
# If enabled is yes, all six setting must be specified, even if they
# are just the empty string "".
#
# The header, peritem, sep, and footer are all Python expressions passed
# through eval, so you can (and must) use Python quoting.
#
# The following hash key are available to the expansion for 'peritem':
# - accountname: the name of the corresponding account;
# - foldername: the name of the folder;
# - localfolders: path to the local directory hosting all Maildir
# folders for the account.
#
# Tilde and environment variable expansions will be performed
# for "filename" knob.
#
#enabled = no
#filename = ~/Mutt/muttrc.mailboxes
#header = "mailboxes "
#peritem = "+%(accountname)s/%(foldername)s"
#sep = " "
#footer = "\n"
# This option stands in the [mbnames] section.
#
# You can also specify a folderfilter. It will apply to the *translated* folder
# name here, and it takes TWO arguments: accountname and foldername. In all
# other ways, it will behave identically to the folderfilter for accounts.
# Please see the folderfilter option for more information and examples.
#
# This filter can be used only to further restrict mbnames to a subset of
# folders that pass the account's folderfilter.
#
# You can customize the order in which mailbox names are listed in the generated
# file by specifying a sort_keyfunc, which takes a single dict argument
# containing keys 'accountname' and 'foldername'. This function will be called
# once for each mailbox, and should return a suitable sort key that defines this
# mailbox' position in the custom ordering.
#
# This is useful with e.g. Mutt-sidebar, which uses the mailbox order from the
# generated file when listing mailboxes in the sidebar.
#
# Default setting is:
#sort_keyfunc = lambda d: (d['accountname'], d['foldername'])
##################################################
# Accounts
##################################################
# This is an account definition clause. You'll have one of these for each
# account listed in the "accounts" option in [general] section (above).
[Account Test]
# These settings specify the two folders that you will be syncing.
# You'll need to have a "Repository ..." section for each one.
localrepository = LocalExample
remoterepository = RemoteExample
########## Advanced settings
# This option stands in the [Account Test] section.
#
# You can have OfflineIMAP continue running indefinitely, automatically syncing
# your mail periodically. If you want that, specify how frequently to do that
# (in minutes) here. Fractional minutes (ie, 3.25) is allowed.
#
#autorefresh = 5
# This option stands in the [Account Test] section.
#
# OfflineImap can replace a number of full updates by quick synchronizations.
# It only synchronizes a folder if
#
# 1) a Maildir folder has changed
#
# or
#
# 2) if an IMAP folder has received new messages or had messages deleted, ie
# it does not update if only IMAP flags have changed.
#
# Full updates need to fetch ALL flags for all messages, so this makes quite a
# performance difference (especially if syncing between two IMAP servers).
#
# Specify 0 for never, -1 for always (works even in non-autorefresh mode)
#
# A positive integer <n> to do <n> quick updates before doing another full
# synchronization (requires autorefresh). Updates are always performed after
# <autorefresh> minutes, be they quick or full.
#
#quick = 10
# This option stands in the [Account Test] section.
#
# You can specify a pre and post sync hook to execute a external command. In
# this case a call to imapfilter to filter mail before the sync process starts
# and a custom shell script after the sync completes.
#
# The pre sync script has to complete before a sync to the account will start.
#
#presynchook = imapfilter -c someotherconfig.lua
#postsynchook = notifysync.sh
# This option stands in the [Account Test] section.
#
# OfflineImap caches the state of the synchronisation to e.g. be able to
# determine if a mail has been added or deleted on either side.
#
# The default and historical backend is 'plain' which writes out the
# state in plain text files. On Repositories with large numbers of
# mails, the performance might not be optimal, as we write out the
# complete file for each change. Another new backend 'sqlite' is
# available which stores the status in sqlite databases.
#
# If you switch the backend, you may want to delete the old cache
# directory in ~/.offlineimap/Account-<account>/LocalStatus manually
# once you are sure that things work.
#
#status_backend = plain
# This option stands in the [Account Test] section.
#
# If you have a limited amount of bandwidth available you can exclude larger
# messages (e.g. those with large attachments etc). If you do this it will
# appear to OfflineIMAP that these messages do not exist at all. They will not
# be copied, have flags changed etc. For this to work on an IMAP server the
# server must have server side search enabled. This works with Gmail and most
# imap servers (e.g. cyrus etc)
#
# The maximum size should be specified in bytes - e.g. 2000000 for approx 2MB
#
#maxsize = 2000000
# This option stands in the [Account Test] section.
#
# When you are starting to sync an already existing account you can tell
# OfflineIMAP to sync messages from only the last x days. When you do this,
# messages older than x days will be completely ignored. This can be useful for
# importing existing accounts when you do not want to download large amounts of
# archive email.
#
# Messages older than maxage days will not be synced, their flags will not be
# changed, they will not be deleted, etc. For OfflineIMAP it will be like these
# messages do not exist. This will perform an IMAP search in the case of IMAP
# or Gmail and therefore requires that the server support server side searching.
# This will calculate the earliest day that would be included in the search and
# include all messages from that day until today. The maxage option expects an
# integer (for the number of days).
#
#maxage = 3
# This option stands in the [Account Test] section.
#
# Maildir file format uses colon (:) separator between uniq name and info.
# Unfortunatelly colon is not allowed character in windows file name. If you
# enable maildir-windows-compatible option, OfflineIMAP will be able to store
# messages on windows drive, but you will probably loose compatibility with
# other programs working with the maildir.
#
#maildir-windows-compatible = no
# This option stands in the [Account Test] section.
#
# Specifies if we want to sync GMail labels with the local repository.
# Effective only for GMail IMAP repositories.
#
# Non-ASCII characters in labels are bad handled or won't work at all.
#
#synclabels = no
# This option stands in the [Account Test] section.
#
# Name of the header to use for label storage. Format for the header
# value differs for different headers, because there are some de-facto
# "standards" set by popular clients:
#
# - X-Label or Keywords keep values separated with spaces; for these
# you, obviously, should not have label values that contain spaces;
#
# - X-Keywords use comma (',') as the separator.
#
# To be consistent with the usual To-like headers, for the rest of header
# types we use comma as the separator.
#
# Use ASCII characters only.
#
#labelsheader = X-Keywords
# This option stands in the [Account Test] section.
#
# Set of labels to be ignored. Comma-separated list. GMail-specific
# labels all start with backslash ('\').
#
# Use ASCII characters only.
#
#ignorelabels = \Inbox, \Starred, \Sent, \Draft, \Spam, \Trash, \Important
# This option stands in the [Account Test] section.
#
# OfflineIMAP can strip off some headers when your messages are propagated
# back to the IMAP server. This option carries the comma-separated list
# of headers to trim off. Header name matching is case-sensitive.
#
# This knob is respected only by IMAP-based accounts. Value of labelsheader
# for GMail-based accounts is automatically added to this list, you don't
# need to specify it explicitely.
#
# Use ASCII characters only.
#
#filterheaders = X-Some-Weird-Header
[Repository LocalExample]
# Each repository requires a "type" declaration. The types supported for
# local repositories are Maildir, GmailMaildir and IMAP.
#
type = Maildir
# This option stands in the [Repository LocalExample] section.
#
# Specify local repository. Your IMAP folders will be synchronized
# to maildirs created under this path. OfflineIMAP will create the
# maildirs for you as needed.
#
localfolders = ~/Test
# This option stands in the [Repository LocalExample] section.
#
# You can specify the "folder separator character" used for your Maildir
# folders. It is inserted in-between the components of the tree. If you
# want your folders to be nested directories, set it to "/". 'sep' is
# ignored for IMAP repositories, as it is queried automatically.
#
#sep = .
# This option stands in the [Repository LocalExample] section.
#
# Some users may not want the atime (last access time) of folders to be
# modified by OfflineIMAP. If 'restoreatime' is set to yes, OfflineIMAP
# will restore the atime of the "new" and "cur" folders in each maildir
# folder to their original value after each sync.
#
# In nearly all cases, the default should be fine.
#
#restoreatime = no
[Repository GmailLocalExample]
# This type of repository enables syncing of Gmail. All Maildir
# configuration settings are also valid here.
#
# This is a separate Repository type from Maildir because it involves
# some extra overhead which sometimes may be significant. We look for
# modified tags in local messages by looking only to the files
# modified since last run. This is usually rather fast, but the first
# time OfflineIMAP runs with synclabels enabled, it will have to check
# the contents of all individual messages for labels and this may take
# a while.
#
type = GmailMaildir
[Repository RemoteExample]
# The remote repository. We only support IMAP or Gmail here.
#
type = IMAP
# These options stands in the [Repository RemoteExample] section.
#
# The following can fetch the account credentials via a python expression that
# is parsed from the pythonfile parameter. For example, a function called
# "getcredentials" that parses a file "filename" and returns the account
# details for "hostname".
#
#remotehosteval = getcredentials("filename", "hostname", "hostname")
#remoteporteval = getcredentials("filename", "hostname", "port")
#remoteusereval = getcredentials("filename", "hostname", "user")
#remotepasseval = getcredentials("filename", "hostname", "passwd")
# This option stands in the [Repository RemoteExample] section.
#
# Specify the remote hostname.
#
remotehost = examplehost
# This option stands in the [Repository RemoteExample] section.
#
# Whether or not to use SSL.
#
#ssl = yes
# This option stands in the [Repository RemoteExample] section.
#
# SSL Client certificate (optional).
#
# Tilde and environment variable expansions will be performed.
#
#sslclientcert = /path/to/file.crt
# This option stands in the [Repository RemoteExample] section.
#
# SSL Client key (optional).
#
# Tilde and environment variable expansions will be performed.
#
#sslclientkey = /path/to/file.key
# This option stands in the [Repository RemoteExample] section.
#
# SSL CA Cert(s) to verify the server cert against (optional).
# No SSL verification is done without this option. If it is
# specified, the CA Cert(s) need to verify the Server cert AND
# match the hostname (* wildcard allowed on the left hand side)
# The certificate should be in PEM format.
#
# Tilde and environment variable expansions will be performed.
#
#sslcacertfile = /path/to/cacertfile.crt
# This option stands in the [Repository RemoteExample] section.
#
# If you connect via SSL/TLS (ssl = yes) and you have no CA certificate
# specified, OfflineIMAP will refuse to sync as it connects to a server
# with an unknown "fingerprint". If you are sure you connect to the
# correct server, you can then configure the presented server
# fingerprint here. OfflineImap will verify that the server fingerprint
# has not changed on each connection and refuse to connect otherwise.
# You can also configure this in addition to CA certificate validation
# above and it will check both ways.
#
# Multiple fingerprints can be specified, separated by commas.
#
# Fingerprints must be in hexadecimal form without leading '0x':
# 40 hex digits like bbfe29cf97acb204591edbafe0aa8c8f914287c9.
#
#cert_fingerprint = <SHA1_of_server_certificate_here>[, <another_SHA1>]
# This option stands in the [Repository RemoteExample] section.
#
# SSL version (optional).
#
# It is best to leave this unset, in which case the correct version will be
# automatically detected. In rare cases, it may be necessary to specify a
# particular version from: tls1, ssl2, ssl3, ssl23 (SSLv2 or SSLv3)
#
#ssl_version = ssl23
# This option stands in the [Repository RemoteExample] section.
#
# Specify the port. If not specified, use a default port.
#
#remoteport = 993
# This option stands in the [Repository RemoteExample] section.
#
# Specify the remote user name.
#
remoteuser = username
# This option stands in the [Repository RemoteExample] section.
#
# Specify the user to be authorized as. Sometimes we want to
# authenticate with our login/password, but tell the server that we
# really want to be treated as some other user; perhaps server will
# allow us to do that (or maybe not). Some IMAP servers migrate
# account names using this functionality: your credentials remain
# intact, but remote identity changes.
#
# Currently this variable is used only for SASL PLAIN authentication
# mechanism, so consider using auth_mechanisms to prioritize PLAIN
# or even make it the only mechanism to be tried.
#
#remote_identity = authzuser
# This option stands in the [Repository RemoteExample] section.
#
# Specify which authentication/authorization mechanisms we should try and the
# order in which OfflineIMAP will try them.
#
# NOTE: any given mechanism will be tried ONLY if it is supported by the remote
# IMAP server.
#
# Default value is ranged is from strongest to more weak ones. Due to technical
# limitations, if GSSAPI is set, it will be tried first, no matter where it was
# specified in the list.
#
#auth_mechanisms = GSSAPI, CRAM-MD5, PLAIN, LOGIN
########## Passwords
# There are six ways to specify the password for the IMAP server:
#
# 1. No password at all specified in the config file.
# If a matching entry is found in ~/.netrc (see netrc (5) for
# information) this password will be used. Do note that netrc only
# allows one entry per hostname. If there is no ~/.netrc file but
# there is an /etc/netrc file, the password will instead be taken
# from there. Otherwise you will be prompted for the password when
# OfflineIMAP starts when using a UI that supports this.
#
# 2. The remote password stored in this file with the remotepass
# option. Any '%' needs to be encoded as '%%'. Example:
# remotepass = mypassword
#
# 3. The remote password stored as a single line in an external
# file, which is referenced by the remotefile option. Example:
# remotepassfile = ~/Password.IMAP.Account1
#
# 4. With a preauth tunnel. With this method, you invoke an external
# program that is guaranteed *NOT* to ask for a password, but rather
# to read from stdin and write to stdout an IMAP procotol stream that
# begins life in the PREAUTH state. When you use a tunnel, you do
# NOT specify a user or password (if you do, they'll be ignored.)
# Instead, you specify a preauthtunnel, as this example illustrates
# for Courier IMAP on Debian:
# preauthtunnel = ssh -q imaphost '/usr/bin/imapd ./Maildir'
#
# 5. If you are using Kerberos and have the Python Kerberos package
# installed, you should not specify a remotepass. If the user has a
# valid Kerberos TGT, OfflineIMAP will figure out the rest all by
# itself, and fall back to password authentication if needed.
#
# 6. Using arbitrary python code. With this method, you invoke a
# function from your pythonfile. To use this method assign the name
# of the function to the variable 'remotepasseval'. Example:
# remotepasseval = get_password("imap.example.net")
# You can also query for the username:
# remoteusereval = get_username("imap.example.net")
# This method can be used to design more elaborate setups, e.g. by
# querying the gnome-keyring via its python bindings.
########## Advanced settings
# These options stands in the [Repository RemoteExample] section.
#
# Tunnels. There are two types:
#
# - preauth: they teleport your connection to the remote system
# and you don't need to authenticate yourself there; the sole
# fact that you succeeded to get the tunnel running is enough.
# This tunnel type was explained above in the 'Passwords' section.
#
# - transport: the just provide the transport (probably encrypted)
# to the IMAP server, but you still need to authenticate at the
# IMAP server.
#
# Tunnels are currently working only with IMAP servers and their
# derivatives (GMail currently). Additionally, for GMail accounts
# preauth tunnel settings are ignored: we don't believe that there
# are ways to preauthenticate at Google mail system IMAP servers.
#
# You must choose at most one tunnel type, be wise M'Lord!
#
#preauthtunnel = ssh -q imaphost '/usr/bin/imapd ./Maildir'
#transporttunnel = openssl s_client -host myimap -port 993 -quiet
# This option stands in the [Repository RemoteExample] section.
#
# Some IMAP servers need a "reference" which often refers to the "folder root".
#
# This is most commonly needed with UW IMAP, where you might need to specify the
# directory in which your mail is stored. The 'reference' value will be prefixed
# to all folder paths refering to that repository. E.g. accessing folder 'INBOX'
# with "reference = Mail" will try to access Mail/INBOX.
#
# The nametrans and folderfilter functions will apply to the full path,
# including the reference prefix. Most users will not need this.
#
#reference = Mail
# This option stands in the [Repository RemoteExample] section.
#
# In between synchronisations, OfflineIMAP can monitor mailboxes for new
# messages using the IDLE command. If you want to enable this, specify here the
# folders you wish to monitor. IMAP protocol requires a separate connection for
# each folder monitored in this way, so setting this option will force settings
# for:
#
# - maxconnections: to be at least the number of folders you give
# - holdconnectionopen: to be true
# - keepalive: to be 29 minutes unless you specify otherwise
#
# This feature isn't complete and may well have problems. See the "Known Issues"
# entry in the manual for more details.
#
# This option should return a Python list. For example
#
#idlefolders = ['INBOX', 'INBOX.Alerts']
# This option stands in the [Repository RemoteExample] section.
#
# OfflineIMAP can use a compressed connection to the IMAP server.
# This can result in faster downloads for some cases.
#
#usecompression = yes
# This option stands in the [Repository RemoteExample] section.
#
# OfflineIMAP can use multiple connections to the server in order
# to perform multiple synchronization actions simultaneously.
# This may place a higher burden on the server. In most cases,
# setting this value to 2 or 3 will speed up the sync, but in some
# cases, it may slow things down. The safe answer is 1. You should
# probably never set it to a value more than 5.
#
#maxconnections = 2
# This option stands in the [Repository RemoteExample] section.
#
# OfflineIMAP normally closes IMAP server connections between refreshes if
# the global option autorefresh is specified. If you wish it to keep the
# connection open, set this to true. If not specified, the default is
# false. Keeping the connection open means a faster sync start the
# next time and may use fewer server resources on connection, but uses
# more server memory. This setting has no effect if autorefresh is not set.
#
#holdconnectionopen = no
# This option stands in the [Repository RemoteExample] section.
#
# If you want to have "keepalives" sent while waiting between syncs, specify the
# amount of time IN SECONDS between keepalives here. Note that sometimes more
# than this amount of time might pass, so don't make it tight. This setting has
# no effect if autorefresh and holdconnectionopen are not both set.
#
#keepalive = 60
# This option stands in the [Repository RemoteExample] section.
#
# Normally, OfflineIMAP will expunge deleted messages from the server. You can
# disable that if you wish. This means that OfflineIMAP will mark them deleted
# on the server, but not actually delete them. You must use some other IMAP
# client to delete them if you use this setting; otherwise, the messages will
# just pile up there forever. Therefore, this setting is definitely NOT
# recommended for a long term.
#
#expunge = no
# This option stands in the [Repository RemoteExample] section.
#
# Specify whether to process all mail folders on the server, or only
# those listed as "subscribed".
#
#subscribedonly = no
# This option stands in the [Repository RemoteExample] section.
#
# You can specify a folder translator. This must be a eval-able.
#
# Python expression that takes a foldername arg and returns the new value. A
# lambda function is suggested.
#
# WARNING: you MUST construct it so that it NEVER returns the same value for two
# folders, UNLESS the second values are filtered out by folderfilter below.
# Failure to follow this rule will result in undefined behavior.
#
# See the user documentation for details and use cases. They are also online at:
# http://docs.offlineimap.org/en/latest/nametrans.html
#
# This example below will remove "INBOX." from the leading edge of folders
# (great for Courier IMAP users).
#
#nametrans = lambda foldername: re.sub('^INBOX\.', '', foldername)
#
# Using Courier remotely and want to duplicate its mailbox naming
# locally? Try this:
#
#nametrans = lambda foldername: re.sub('^INBOX\.*', '.', foldername)
# This option stands in the [Repository RemoteExample] section.
#
# Determines if folderfilter will be invoked on each run (dynamic folder
# filtering) or filtering status will be determined at startup (default
# behaviour).
#
#dynamic_folderfilter = False
# This option stands in the [Repository RemoteExample] section.
#
# You can specify which folders to sync using the folderfilter setting. You can
# provide any python function (e.g. a lambda function) which will be invoked for
# each foldername. If the filter function returns True, the folder will be
# synced, if it returns False, it.
#
# The folderfilter operates on the *UNTRANSLATED* name (before any nametrans
# translation takes place).
#
# Example 1: synchronizing only INBOX and Sent.
#
#folderfilter = lambda foldername: foldername in ['INBOX', 'Sent']
#
# Example 2: synchronizing everything except Trash.
#
#folderfilter = lambda foldername: foldername not in ['Trash']
#
# Example 3: Using a regular expression to exclude Trash and all folders
# containing the characters "Del".
#
#folderfilter = lambda foldername: not re.search('(^Trash$|Del)', foldername)
#
# If folderfilter is not specified, ALL remote folders will be synchronized.
#
# You can span multiple lines by indenting the others. (Use backslashes at the
# end when required by Python syntax) For instance:
#
#folderfilter = lambda foldername: foldername in [
# 'INBOX', 'Sent Mail',
# 'Deleted Items', 'Received']
# This option stands in the [Repository RemoteExample] section.
#
# You can specify folderincludes to include additional folders. It should
# return a Python list. This might be used to include a folder that was
# excluded by your folderfilter rule, to include a folder that your server does
# not specify with its LIST option, or to include a folder that is outside your
# basic reference.
#
# The 'reference' value will not be prefixed to this folder name, even if you
# have specified one. For example:
#
#folderincludes = ['debian.user', 'debian.personal']
# This option stands in the [Repository RemoteExample] section.
#
# If you do not want to have any folders created on this repository,
# set the createfolders variable to False, the default is True. Using
# this feature you can e.g. disable the propagation of new folders to
# the new repository.
#
#createfolders = True
# This option stands in the [Repository RemoteExample] section.
#
# 'foldersort' determines how folders are sorted.
#
# This affects order of synchronization and mbnames. The expression should
# return -1, 0, or 1, as the default Python cmp() does. The two arguments, x
# and y, are strings representing the names of the folders to be sorted. The
# sorting is applied *AFTER* nametrans, if any. The default is to sort IMAP
# folders alphabetically (case-insensitive). Usually, you should never have to
# modify this. To eg. reverse the sort:
#
#foldersort = lambda x, y: -cmp(x, y)
# This option stands in the [Repository RemoteExample] section.
#
# Enable 1-way synchronization. When setting 'readonly' to True, this
# repository will not be modified during synchronization. Usefull to
# e.g. backup an IMAP server. The readonly setting can be applied to any
# type of Repository (Maildir, Imap, etc).
#
#readonly = False
[Repository GmailExample]
# A repository using Gmail's IMAP interface.
#
# Any configuration parameter of "IMAP" type repositories can be used here.
# Only "remoteuser" (or "remoteusereval" ) is mandatory. Default values for
# other parameters are OK, and you should not need fiddle with those.
#
# The Gmail repository will use hard-coded values for "remotehost",
# "remoteport", "tunnel" and "ssl". Any attempt to set those parameters will be
# silently ignored. For details, see
#
# http://mail.google.com/support/bin/answer.py?answer=78799&topic=12814
#
# To enable GMail labels synchronisation, set the option "synclabels"
# in the corresponding "Account" section.
#
type = Gmail
# This option stands in the [Repository GmailExample] section.
#
# Specify the Gmail user name. This is the only mandatory parameter.
#
remoteuser = username@gmail.com
# This option stands in the [Repository GmailExample] section.
#
# The trash folder name may be different from [Gmail]/Trash due to localization.
# You should look for the localized names of the spam folder too: "spamfolder"
# tunable will help you to override the standard name.
#
# For example on German Gmail, this setting should be:
#
#trashfolder = [Gmail]/Papierkorb