If utf8foldernames is enabled on account level all folder names read
from the IMAP server will immediately be reencoded to UTF-8. Names
will be treated as UTF-8 as long as the IMAP server isn't contacted again,
for which they are reencoded to IMAP4-UTF-7.
This means that any further processing such as nametrans, folderfilter
etc. will act upon the UTF-8 names, which will have to be documented
carefully.
NOTE 1:
GMail repositories and folders inherit from the IMAP... classes, so I don't
know yet if these changes have ugly side-effects. But web research suggests
that GMail IMAP folders are equally encoded in UTF-7 so that should work
identically here and incorporate the same improvements.
NOTE 2:
I could not test the behaviour with idlefolders as I didn't get this option
to work at all, not even with the latest stable version.
NOTE 3:
I *did* test to sync an IMAP repository against another IMAP repository.
Signed-off-by: Urs Liska <git@ursliska.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
While intending *not* to change the behaviour of the existing
decodefoldernames option this commit transparently improves
the coding.
So far this worked by overriding the folder's getvisiblename() method
which reads self.visiblename from and applies the conversion on
*every* invocation of getvisiblename().
This commit does the calculation once in the IMAPFolder's __init__.
Signed-off-by: Urs Liska <git@ursliska.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
This commit adds two functions
- imaputil.IMAP_utf8()
- imaputil.utf8_IMAP()
as an interface to the new imap4_utf_7 codec.
Signed-off-by: Urs Liska <git@ursliska.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
If the config option `transporttunnel` is used the option `remotehost` is not
needed, because the tunnel provide the IMAP connection.
Signed-off-by: Thomas Merkel <tm@core.io>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
The support for the realdelete configuration option was removed because this
could lead to data loss.
See 51728ed to know more.
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
Some returned responses end with ')' rather than 'UID XXX)' as expected.
BTW, a better policy could be to request for the 'X-OfflineIMAP' header only
rather than fetching all the headers and looking for it manually.
Also:
- Strip the output when error occurs: we don't need the full response unless
'imap' debug mode is enabled.
- Improve the comments.
Github-ref: https://github.com/OfflineIMAP/offlineimap/issues/479
Tested-by: https://github.com/secomi
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
On each folder scan, we must compute the min_uid. Locally, this is done by
relying on the prefix timestamp in the filenames. If for whatever reason they do
not reflect the Date header of the email, changing maxage leads to undefined
behaviour.
To prevent from this, we rather rely on the remote folder. We assume that the
remotes are more reliable to provide correct sets of UIDs based on dates than we
are.
Github-ref: https://github.com/OfflineIMAP/offlineimap/issues/384
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
mbnames is initialized and written once in the run from OfflineImap.__sync().
However, the in-memory instance is fed with data at sync time for each folder
and the intermediate files are written as soon as all the folders are synced for
the account. All of this is done inside the SyncableAccount.__sync() method
while the syncrunner is looping on this.
This means that we duplicate entries for mbnames in each loop (most likely when
autorefresh is enabled).
It is wrong to have duplicates in mbnames for each account. Ignore duplicates
when adding data in the mbnames intermediate files.
Github-ref: https://github.com/OfflineIMAP/offlineimap/issues/467
Reported-and-tested-by: Shin Kojima <shin@kojima.org>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
Some users might use more than one python/imaplib version. This tends to make
debugging and support harder.
Displaying this information by default for each run should help.
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
Checking if we have to run this authentication method once it's already passed
to imaplib2 is too late. Make the checks at correct time, before we try the
authentication method. IOW, before we call
imapobj.authenticate('XOAUTH2', self.__xoauth2handler)
Github-ref: https://github.com/OfflineIMAP/offlineimap/issues/442
Tested-by: Klemens Schölhorn <klemens@schoelhorn.eu>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
Make sure that we refresh the screen atomically, since the emit()
function may be called by more that one threads at a time.
Also, modify the draw_bannerwin() method which used to fail in case the
window would become too small. Make sure that the provided offsets to
the window.addstr() method are properly bounded.
Closes#160: blinkenlights display is broken
Tested-by: Cyril Brulebois
Tested-by: Gaudenz Steinlin
Signed-off-by: Ilias Tsitsimpis <i.tsitsimpis@gmail.com>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
Stop the run when this option is found. Migrating from the historical plain
text status cache is still supported.
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
This would require more digging to understand how this is possible. I suspect
that a previous run has been interrupted.
Github-ref: https://github.com/OfflineIMAP/offlineimap/issues/445
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
Use a mutex to lock the sync transaction, uniquely identified by the remote
folder name.
Serializing the syncs prevents any IDLE thread from syncing the same folder of
a concurrent autorefresh thread. Othewise, we could download new messages
twice, or read "one message past the last one" which in some cases creates a
duplicated messages. Also prevents IDLE threads from reading new messages
before the autorefresh thread finishes synchronization.
Github-ref: #421
Originally-submitted-by: Michael Hohmuth <hohmuth@sax.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
According to documentation and the code, the following behavior is expected:
ipv6 = no
AF_INET is used
ipv6 = yes
AF_INET6 is used
ipv6 undefined
AF_UNDEF is used
Unfortunately the code parsing the "ipv6" configuration option was
returning "False" rather than "None" when failing to locate the option,
making it impossible to detect whether "ipv6" isn't set or if it was set
to "false" and leading offlineimap to use AF_INET for the connection.
This fixes the use of offlineimap on hosts that occasionaly are
connected to IPv6-only networks.
Signed-off-by: Stéphane Graber <stgraber@ubuntu.com>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
The saveall() method must acquire the lock to make writes.
Reported-and-tested-by: Julien Cubizolles <j.cubizolles@free.fr>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
systemd supports a watchdog (via the WatchdogSec service file option)
which will send the program a SIGABRT when the timer expires, however
currently this causes offlineimap to be killed immediately.
This patch registers SIGABRT and handles it in the same manner as
SIGUSR2, so that the current synchronisation is completed before the
program exits safely.
This makes offlineimap more flexible and robust for persistent setups
that make use of holdconnectionopen and autorefresh options.
For example, it may be useful in assisting with the occasional
situation where offlineimap may not return successfully after a suspend
and resume.
To make use of this, users could add the following to the [Service]
section of their systemd offlineimap service file (restart every 5
minutes):
Restart=on-watchdog
WatchdogSec=300
Signed-off-by: Chris Smart <mail@csmart.io>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
Allow retrying the download of messages more than twice.
Signed-off-by: Luke Kenneth Casson Leighton <lkcl@lkcl.net>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
Allow to use a another proxy for authentication than for IMAP.
Signed-off-by: Luke Kenneth Casson Leighton <lkcl@lkcl.net>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
Commit e51ed80e claims to add tilde and environment variable expansion
to multiple locations including Repository.localfolders. However, this
particular options seems to have been missed in that commit, and
apparently no one noticed till date
Signed-off-by: Darshit Shah <darnir@gmail.com>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
481efa95f6 is wrong to assume the local nametrans is set up and working.
Now, we correctly check that the local folder name is the same once both
nametrans are applied to itself. This check is only done when we have to create
the folder on remote.
Github-ref: https://github.com/OfflineIMAP/offlineimap/issues/413
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
When creating a folder on the remote, the status folder was created
using the remote folder name, but then Account assumed the statusfolder
name matched the local folder. Correct this.
Signed-off-by: Abdo Roig-Maranges <abdo.roig@gmail.com>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
