This would require more digging to understand how this is possible. I suspect
that a previous run has been interrupted.
Github-ref: https://github.com/OfflineIMAP/offlineimap/issues/445
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
This should significantly improve performance when used to write large
amounts of messages.
This feature is enabled through the fsync configuration option.
Code refactorize around fsync.
This addresses #390 (although it doesn't necessarily fix all instances
of that problem yet).
Github-ref: https://github.com/OfflineIMAP/offlineimap/issues/390
Originally-written-by: Giel van Schijndel <me@mortis.eu>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
If the map file is not properly written (e.g. due to unexpected kill)
offlineimap might wrongly consider some UIDs to have been deleted from the local
side which could lead to data loss.
Use a temporary map file rather than writing to the map file directly.
Github-ref: https://github.com/OfflineIMAP/offlineimap/issues/380
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
There is no other way to make Python2 and Python3 happy, because syntax
raise E, V, T is incompatible with the latter.
Signed-off-by: Łukasz Żarnowiecki <dolohow@outlook.com>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
1. When using maxage, local and remote messagelists are supposed to only
contain messages from at most maxage days ago. But local and remote used
different timezones to calculate what "maxage days ago" means, resulting
in removals on one side. Now, we ask the local folder for maxage days'
worth of mail, find the lowest UID, and then ask the remote folder for
all UID's starting with that lowest one.
2. maxage was fundamentally wrong in the IMAP-IMAP case: it assumed that
remote messages have UIDs in the same order as their local counterparts,
which could be false, e.g. when messages are copied in quick succession.
So, remove support for maxage in the IMAP-IMAP case.
3. Add startdate option for IMAP-IMAP syncs: use messages from the given
repository starting at startdate, and all messages from the other
repository. In the first sync, the other repository must be empty.
4. Allow maxage to be specified either as number of days to sync (as
previously) or as a fixed date.
Signed-off-by: Janna Martl <janna.martl109@gmail.com>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
We usually mutate some exceptions to OfflineImapError() and it is
a whole lot better if such exception will show up with the original
traceback, so all valid occurrences of such mutations were transformed
to the 3-tuple form of "raise". Had also added coding guidelines
document where this re-raise strategy is documented.
Signed-off-by: Eygene Ryabinkin <rea@codelabs.ru>
Make external API of class/module to be smaller, explicitely mark
all internal functions. Also annotate methods that are implemented
as the part of the parent class interface.
Signed-off-by: Eygene Ryabinkin <rea@codelabs.ru>
They are redundant in all pruned cases and sometimes even create some
problems, e.g., when one tries to jump through paragraphs in vi.
Signed-off-by: Eygene Ryabinkin <rea@codelabs.ru>
Prevent savemessage(), and savemessageflags() to occur in dryrun mode in
all backends. Still need to protect against deletemessage().
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Bail out with a better Exception and error text. The whole mapped
UID situation needs to be improved though.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
These were needed for python <2.6 compatability, but since we depend on
python 2.6 now, these can go.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Previously, assigning a new UID to a mapped IMAP or Maildir repository
was done by loading the "local" item, saving it under a new UID and
deleting the old one. This involved lots of disk activity for nothing
more than an effective file rename in Maildirs, and lots of network
usage in the MappedUID cases.
We do this on every upload from a local to a remote item, so that can
potentially be quite expensive. This patch lets backends that support it
(Maildir, MappedUID) efficiently rename the file rather than having to
read the mail content, write it out as a new file and delete the old
file. This speeds up uploads from Maildir and the MappedUID server.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Only import the lock, that we actually need. Also import the with statement
for use with python 2.5. We'll need it for sure in this file.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Previously, we instanciated an MappedImapFolder, and would cleverly (too
cleverly?) invoke methods on it casting it to an IMAPFolder by calling
methods such as: self._mb.cachemessages(self) where self._MB is the class
IMAPFolder and self and instance of MappedImapFolder. If
e.g. cachemessages() invokes a method uidexists() which exists for
MappedImapFolder, but not directly in IMAPFolder, I am not sure if
Python would at some point attempt to use the method of the wrong class.
Also, this leads to some twisted thinking as our class would in same
cases act as an IMAPFolder and in some cases as an MappedImapFOlder and
it is not always clear if we mean REMOTE UID or LOCAL UID.
This commit simplifies the class, by a)doing away with the complex Mixin
construct and directly inheriting from IMAPFOlder (so we get all the
IMAPFOlder methods that we can inherit). We instantiate self._mb as a
new instance of IMAPFolder which represents the local IMAP using local
UIDs, separating the MappedIMAPFolder construct logically from the
IMAPFolder somewhat.
In the long run, I would like to remove self._mb completely and simply
override any method that needs overriding, but let us take small and
understandable baby steps here.
Reported-and-tested-by: Vincent Beffara <vbeffara@gmail.com>
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
Folder.savemessage() is supposed to return the new UID that a backend
assigned, and it BaseFolder.copymessageto() fails if we don't return a
non-negative number in the savemessage() there.
For some reason, the UIDMappedFolder was not returning anything in
savemessage, despite clearly stating in the code docs that it is
supposed to return a UID. Not sure how long this has already been the
case. This patch fixes the UIDMappedFolder to behave as it should.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
This function will need much more "robustifying", but the very least we
can do is to print the file name and line that are giving trouble.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
In order to optimize performance, we fold the 1st and 2nd pass of our
sync strategy into one. They were essentially doing the same thing:
uploading a message to the other side. The only difference was that in
one case we have a negative UID locally, and in the other case, we have
a positive one already.
This saves some time, as we don't have to run through that function on
IMAP servers anyway (they always have positive UIDs), and 2nd were we
stalling further copying until phase 1 was finished. So uploading a
single new message would prevent us from starting to copy existing
regular messages.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
We are calling getmessagelist() internally a lot, e.g. just to check if
a UID exists (from uidexist()). This is a very expensive operation in
the UIDMapped case, as we reconstruct the whole messagelist dict every
single time, involving lots of copying etc.
So we provide more efficient implementations for the uidexists()
getmessageuidlist() and getmessagecount() functions that are fast in the
UIDMapped case. This should solve the performance regression that was
recently observed in the Mapped UID case.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Reviewed-and-tested-by: Vincent Beffara <vbeffara@ens-lyon.fr>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
- Some documentation improvements, this is a severely underdocumented
class. This still needs some further improvements though.
- Don't use apply(Baseclass) (which is going away in Python 3), use
IMAPFolder.__init__(self, *args, **kwargs).
- Don't call ValueError, string. It is ValueError(string)
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
Code was broken, as these backends import UIBase (which had been moved).
However, they don't use it, so we can just delete the import.
Sorry, I failed to find those earlier somehow.
Signed-off-by: Sebastian <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
The attached patch adds syncing the INTERNALDATE of IMAP folders with
the mtime of messages in maildir folders.
I want this to happen, because I'm running a dovecot over the maildirs
synced by offlineimap, and that uses the mtime as the INTERNALDATE.
When using mutt to view messages I generally sort based on the received
date, which for IMAP folders is the INTERNALDATE.
Since this is the first real coding I've done in Python the patch may
need to be cleaned up some, but it's working pretty well for me. I've
added new messages to each side, and the received date has been
preserved going both ways.
