If we do not use a SSL connection anyway and if the server supports it,
authenticate automatically with STARTTLS.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
During a sync run, someone might remove or move IMAP messages. As we
only cache the list of UIDs in the beginning, we might be requesting
UIDs that don't exist anymore. Protect folder.IMAP.getmessage() against
the response that we get when we ask for unknown UIDs.
Also, if the server responds with anything else than "OK", (eg. Gmail
seems to be saying frequently ['NO', 'Dave I can't let you do that now']
:-) so we should also be throwing OfflineImapErrors here rather than
AssertionErrors.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
Previously we were attempting to save out mails according to
http://www.qmail.org/man/man5/maildir.html in 4 steps:
1 Create a unique filename
2 Do stat(tmp/<filename>). If it found a file, wait 2 sec and go back to 1.
3 Create and write the message to the tmp/<filename>.
4 Link from tmp/* to new/*
(we did step 2 up to 15 times) But as stated by
http://wiki1.dovecot.org/MailboxFormat/Maildir (see section 'Issues with
the specification'), this is a pointless approach, e.g. there are race
issues between stating that the filename does not exist and the actual
moving (when it might exist).
So, we can simplify the steps as suggested in the dovecot wiki and
tighten up our safety at the same time.
One improvement that we do is to open the file, guaranteeing that it did
not exist before in an atomic manner, thus our simplified approach is
really more secure than what we had before.
Also, we throw an OfflineImapError at MESSAGE level when the supposedly
unique filename already exists, so that we can skip this message and
still continue with other messages.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
Recommend to upgrade from the previous release. I forgot to change the
Changelog previously. [Update imaplib2 to 2.24]
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
Depending on the configuration we use the plain text or the new
experimental sqlite backend for the LocalStatus cache. Make plain text
the default status backend but allow people to configure
status_backend=sqlite in their [Account ...] section.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
Using threading._VERBOSE=1 is broken since python 2.6 till at least
python 3.2, (http://bugs.python.org/issue4188) so we can't use it for
our thread debugging.
Remove the usage of threading._VERBOSE, and implement a "light thread
debug log" that for now outputs information when a new thread is being
registered and when it is being unregistered. I am sure we will be able
to add more thread debugging information over the time.
Besides '-d thread' this will re-enable the usage of -d 'all' for the
most verbose debugging of all categories.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
This commit enables true 1-way syncing between repositories. This has
often been demanded for backup purposes when you do not want to cause
accidental modifications of your backup that would be propagated to the
other side.
This has been implemented by allowing to configure a Repository as
'readonly' to forbid any modification on it.
'readonly' applies to all the type of repositories.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
This function will need much more "robustifying", but the very least we
can do is to print the file name and line that are giving trouble.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
Allow leading and trailing spaces in folder names specified on the
command line.
Reviewed-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Dan Christensen <jdc@uwo.ca>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
in accounts.sync() we would holdordropconnections() after each sync. But
depending on the repository configuration that might imply that
offlineimap tries to keep the same connections. But when a sync failed,
e.g. after a user had his computer suspended, it might be that our
connections that we have are worthless. So definitely drop them after a
failed sync.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
In order to optimize performance, we fold the 1st and 2nd pass of our
sync strategy into one. They were essentially doing the same thing:
uploading a message to the other side. The only difference was that in
one case we have a negative UID locally, and in the other case, we have
a positive one already.
This saves some time, as we don't have to run through that function on
IMAP servers anyway (they always have positive UIDs), and 2nd were we
stalling further copying until phase 1 was finished. So uploading a
single new message would prevent us from starting to copy existing
regular messages.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
* IMAP4_Tunnel constructor should support base-class arguments, in
order to support the timeout argument.
* IMAP4_Tunnel needs to store the member IMAP4.host, which is normally
done in IMAP4.open().
* Update IMAP4_Tunnel.read() and IMAP4_Tunnel.send(). We turn on
nonblocking mode for these sockets, so we can return immediately
with whatever data is available.
Signed-off-by: Ethan Glasser-Camp <ethan@betacantrips.com>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
Previously ALL spaces had been stripped off. Now, only strip spaces
around the comma, so -f "INBOX, Deleted Mails" will work. You will still
need to quote or escape spaces so the shell hand the list as one command
line argument to offlineimap.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
When uploading a new message to Gmail we need to find out the UID it
assigned it, but Gmail does not advertize the UIDPLUS extension (in all
cases) and it fails to find the email that we just uploaded when
searching for it. This prevented us effectively from uploading to
gmail.
See analysis in
http://lists.alioth.debian.org/pipermail/offlineimap-project/2011-March/001449.html
for details on what is going wrong.
This patch increases compatability with Gmail by checking for APPENDUID
responses to an APPEND action even if the server did not claim to
support it. This restores the capability to upload messages to the
*broken* Gmail IMAP implementation.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Without this, trying to Ctrl-C out of offlineimap will go into a hang.
Signed-off-by: Ethan Glasser-Camp <ethan@betacantrips.com>
Reviewed-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
Previously we would output:
Folder sync sspaeth.de[INBOX.INBOX201004]:
Syncing INBOX.INBOX201004: IMAP -> Maildir
Folder sync sspaeth.de[INBOX.INBOX201006]:
Syncing INBOX.INBOX201006: IMAP -> Maildir
Folder sync sspaeth.de[INBOX.INBOX201009]:
Syncing INBOX.INBOX201009: IMAP -> Maildir
which is very repetitive and cluttered. By naming the folder sync
threads just according to the account and not the folder, the output
looks much nicer:
Folder sync [sspaeth.de]:
Syncing INBOX.INBOX201004: IMAP -> Maildir
Syncing INBOX.INBOX201006: IMAP -> Maildir
Syncing INBOX.INBOX201009: IMAP -> Maildir
If syncing multiple accounts in parallel, we will still get headers
indicating the account:
Folder sync [sspaeth.de]:
Syncing INBOX: IMAP -> Maildir
Syncing INBOX.INBOX201006: IMAP -> Maildir
Folder sync [gmail]:
Syncing INBOX: IMAP -> Maildir
This is a small fix that makes the output much nicer in my opinion.
Also don't output the thread name if we are in the MainThread, e.g. when
we output the initial offlineimap banner.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
Read() should return empty string when EOF happen, instead of looping
forever. This is the right semantics of read(), and a wrapped version
should not change it.
If you read the read(2) system call manpage, it tells you that when EOF
is seen, return value is 0; it does not say
``loop forever when EOF happen''.
After the EOF detection is patched you can see the
following exception:
WARNING: ERROR attempting to copy message 344 for account Gmail:Traceback (most recent call last):
File "/usr/lib/pymodules/python2.6/offlineimap/folder/Base.py", line 282, in copymessageto
message = self.getmessage(uid)
File "/usr/lib/pymodules/python2.6/offlineimap/folder/IMAP.py", line 216, in getmessage
initialresult = imapobj.uid('fetch', '%d' % uid, '(BODY.PEEK[])')
File "/usr/lib/python2.6/imaplib.py", line 753, in uid
typ, dat = self._simple_command(name, command, *args)
File "/usr/lib/python2.6/imaplib.py", line 1060, in _simple_command
return self._command_complete(name, self._command(name, *args))
File "/usr/lib/python2.6/imaplib.py", line 890, in _command_complete
raise self.abort('command: %s => %s' % (name, val))
abort: command: UID => socket error: EOF
Signed-off-by: Bao Haojun <baohaojun@gmail.com>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
The previous syncing strategy was doing more than we needed to and was a
bit underdocumented. This is an attempt to clean it up.
1) Do away with the previous different code paths depending on
whether there is a LocalStatus file or not (the isnewfolder() test). We
always use the same strategy now, which makes the strategy easier to
understand. This strategy is simply:
a) Sync remote to local folder first
b) Sync local to remote
Where each sync implies a 4 pass strategy which does basically the same
as before (explained below).
2) Don't delete messages on LOCAL which don't exist on REMOTE right at
the beginning anymore. This prevented us e.g. from keeping local
messages rather than redownloading everything once LocalStatus got
corrupted or deleted. This surprised many who put in an existing local
maildir and expected it to be synced to the remote place. Instead, the
local maildir was deleted. This is a data loss that actually occured to
people!
3) No need to separately sync the statusfolder, we update that one
simultanously with the destfolders...
3) Simplified the sync function API by only taking one destdir rather
than a list of destdirs, we never used more anyway. This makes the code
easier to read.
4) Added plenty of code comments while I was going through to make sure
the strategy is easy to understand.
-----------------------------------------
Pass1: Transfer new local messages
Upload msg with negative/no UIDs to dstfolder. dstfolder should
assign that message a new UID. Update statusfolder.
Pass2: Copy existing messages
Copy messages in self, but not statusfolder to dstfolder if not
already in dstfolder. Update statusfolder.
Pass3: Remove deleted messages
Get all UIDS in statusfolder but not self. These are messages
that we have locally deleted. Delete those from dstfolder and
statusfolder.
Pass4: Synchronize flag changes
Compare flags in self with those in statusfolder. If msg has a
valid UID and exists on dstfolder (has not e.g. been deleted
there), sync the flag change to dstfolder and statusfolder.
The user visible implications of this change should be unnoticable
except in one situation:
Blowing away LocalStatus will not require you to redownload ALL of
your mails if you still have the local Maildir. It will simply recreate
LocalStatus.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
The previous ui names were pretty unwieldy. Is it TTYUI.TTY or
TTY.TTYUI? Do I have to use capitals and where?
Simplify the names by making them case insensitive and by dropping
everything before the dot.
So "Curses.Blinkenlights" can now be invoked as "blinkenlights" or
"BLINKENLIGHTS". The old names will still work just fine so the
transition should be smooth. We issue a warning that the long names are
deprecated.
Document in offlineimap.conf that we don't accept lists of fallback UIs,
but only one UI option (this was already the case before this commit but
still wrongly documented).
The list of accepted ui names is:
ttyui (default), basic, quiet, machineui, blinkenlights
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
Rather than inserting our own home-grown header, everytime we save a
message to an IMAP server, we check if we suport the UIDPLUS extension
which provides us with an APPENDUID reply. Use that to find the new UID
if possible, but keep the old way if we don't have that extension.
If a folder is read-only, return the uid that we have passed in per API
description in folder.Base.py
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
savemessage was too long and complex. Factor out the date guessing part
of the function and put it into a function of its own. The logic of the
date guessing is the same, however, we do not use the
imaplib.Time2InternalDate() function as it is buggy
(http://bugs.python.org/issue11024) and returns localized patches. So we
create INTERNALDATE ourselves and pass it to append() as a string.
This commit fixes a bug that international users used to pass an invalid
date to the IMAP server, which the server will either ignore or complain
about.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
A typo was preventing profiling mode to really enable singlethreading
mode. Fixing the unfortunate typo of mine makes it work.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
A Repository() returns the correctly instanciated dervivate of a
BaseRepository, depending on the parameters passed to it. The returned
instance is eg an ImapRepository(). This makes the code look nicer,
and we have less functions lying around outside of classes (no more
global LoadRepository() function).
This will also enable us to conveniently hand back a
LocalStatusRepository based on SQLITE rather than plain text, if the
user configures this to be the experimental and optional backend
(once it exists).
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
This seems to prevent mysterious hangs with SSL imap servers (especially
gmail?) and does not harm in any case. So let us enable keep-alive
messages for ssl connections.
Our thread pool should be made more robust against closed SSL
connections (which do not always seem to raise Exceptions), and not
deadlock while waiting for resources or data that will never arrive.
Reviewed-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Gábor Melis <mega@retes.hu>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
Commit e506442996 changed getglobalui() back to UIBase.getglobalui()
although the import had changed earlier, causing a regression.
Fix this by using the correct and current way of calling the ui.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
Signed-off-by: Thomas Jost <schnouki@schnouki.net>
Reviewed-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
Avoid static version number in the Makefile. It's a possible source of errors,
especially for me.
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
We have vonverted all places in folder/* to have self.ui available,
rather than having to use UIBase.getglobalui() all the
time. Unfortunately, we did not convert the users in folder/Base.py.
This patch does it belatedly. This fixes
http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=613483
Signed-off-by: Sebastian Spaeth1 <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
On Thu, Feb 17, 2011 at 12:09:16PM +0100, Sebastian Spaeth wrote:
> still a bug in make docs that I only discovered today.
>
> our Makefile contains
>
> type rst2html 2>/dev/null && echo rst2html || echo rst2html.py
>
> which outputs on my box:
>
> rst2html is /usr/bin/rst2html
> rst2html
>
> which will break things. So either we need to suppres STDOUT too:
>
> type rst2html >/dev/null 2>&1 && echo rst2html || echo rst2html.py
>
> (which works), or we could use `which rst2html` (which returns 0 if the
> command exists) and outputs the proper path.
Reported-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
Looks like some distribution strip the extensions of the python commands and
some don't. Try to find the correct commands by ourself.
Reported-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Reviewed-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
Make --version much less verbose and only print out the version number
to facilitate easy parsing by scripts. We don't really need the verbose
copyright output, it is show with --help anyway.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
Improve documentation about what CustomConfigHelperMixin does,
it was not very clear without a close look to the code before.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Introduce Changelog.draft.rst in the releasing process. Using a dedicated file
for the WIP gives more readable diffs.
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
