Some environments that return AAAA records for their IMAP servers can pose
problems for clients that do not have end-to-end IPv6 connectivity for a number
of reasons (e.g. policy, lack of full routing, security, etc..)
Even with a fallback mechanism in place, you can still arrive at IMAP
implementations that could prevent authentication from unknown IPv6 space. This
in itself is not enough to fallback to IPv4 since there is an actual connection
on that socket.
This change is for introducing a user-defined value:
[Repository imap-remote]
ipv6 = no
to create a preference per repository on which AF to connect to the remote
server on
ipv6 = yes (AF_INET6)
ipv6 = no (AF_INET)
unspecified = default
Signed-off-by: Ebben Aries <e@dscp.org>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
This fix does not apply when any keyword in configured which is already
harmless.
Written-by: Igor Almeida <igor.contato@gmail.com>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
This commit assembles a dictionary mapping user-specified IMAP keywords
to Maildir lower-case flags, similar to Dovecot's format
http://wiki2.dovecot.org/MailboxFormat/Maildir
Configuration example:
[Repository Local]
type = Maildir
localfolders = ~/Maildir/
customflag_a = $label1
customflag_b = $Forwarded
customflag_c = Junk
Signed-off-by: Igor Almeida <igor.contato@gmail.com>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
Allow the user to block usage of known-bad versions of SSL and TLS.
Signed-off-by: Ben Boeckel <mathstuf@gmail.com>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
When new mail arrives, this hook is triggered, allowing the user to
play a sound, or launch a popup.
Signed-off-by: Matthew Krafczyk <krafczyk.matthew@gmail.com>
This simplifies logics for the user, especially if he uses both
fingerprint and certificate validation: it is hard to maintain
the compatibility with the prior behaviour and to avoid getting
default CA bundle to be disabled when fingerprint verification
is requested.
See
http://thread.gmane.org/gmane.mail.imap.offlineimap.general/6695
for discussion about this change.
Default CA bundle is requested via 'sslcertfile = OS-DEFAULT'.
I had also enforced all cases where explicitely-requested CA bundles
are non-existent to be hard errors: when users asks us to use CA
bundle (and, thus, certificate validation), but we can't find one,
we must error out rather than happily continue and downgrade to
no validation.
Reported-By: Edd Barrett <edd@theunixzoo.co.uk>
Reviewed-By: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
Signed-off-by: Eygene Ryabinkin <rea@codelabs.ru>
We usually mutate some exceptions to OfflineImapError() and it is
a whole lot better if such exception will show up with the original
traceback, so all valid occurrences of such mutations were transformed
to the 3-tuple form of "raise". Had also added coding guidelines
document where this re-raise strategy is documented.
Signed-off-by: Eygene Ryabinkin <rea@codelabs.ru>
It is a bit cleaner than making chains of calls like
{{{
value = os.path.expanduser(value)
value = os.path.abspath(value)
}}}
since we do see all transformations to be applied in a single
iterable and have no repeated code like in the above example.
Signed-off-by: Eygene Ryabinkin <rea@codelabs.ru>
- Multi-line documentation for functions and methods
now has ending triple-double-quotes on an own line,
as per PEP 257.
- Added documentation and comments to almost all functions
and methods.
- Added stub implementations for getconfig() and getsection()
inside CustomConfig.ConfigHelperMixin to provide sane
run-time diagnostics for classes that doesn't implement them.
Signed-off-by: Eygene Ryabinkin <rea@codelabs.ru>
If when we request a LocalStatus folder, the folder has to be created,
we look whether the other backend has data, and if it does we migrate
it to the new backend.
The old backend data is left untouched, so that if you change back say
from sqlite to plaintext, the older data is still there. That should
not lead to data loss, only a slower sync while the status folder gets
updated.
Signed-off-by: Eygene Ryabinkin <rea@codelabs.ru>
* Implements Status Folder format v2, with a mechanism to upgrade an
old statusfolder.
* Do not warn about Gmail and GmailMaildir needing sqlite backend
anymore.
* Clean repository.LocalStatus reusing some code from
folder.LocalStatus.
* Change field separator in the plaintext file from ':' to '|'. Now
the local status stores gmail labels. If they contain field
separator character (formerly ':'), they get messed up. The new
character '|' is less likely to appear in a label.
Signed-off-by: Eygene Ryabinkin <rea@codelabs.ru>
When synclabels config flag is set to "yes" for the GMail repo,
offlineimap fetches the message labels along with the messages, and
embeds them into the body under the header X-Keywords (or whatever
'labelsheader' was set to), as a comma separated list.
It also adds an extra pass to savemessageto, that performs label
synchronization on existing messages from GMail to local, the same way
it is done with flags.
We also introduce GmailMaildir repository that adds functionality to
change message labels. It keeps track of messages modification time,
so one can quickly detect when the labels may have changed.
Signed-off-by: Eygene Ryabinkin <rea@codelabs.ru>
It is called localfolders and holds expanded name for the same
variable for the local repository of the account that is being
processed.
GitHub issue: https://github.com/OfflineIMAP/offlineimap/issues/21
Signed-off-by: Eygene Ryabinkin <rea@codelabs.ru>
Bring the description in the template offlineimap.conf in sync to the
actual implementation: pass folder names to the sorting function, not
the offlineimap.folder.IMAP.IMAPFolder objects themselves.
GitHub issue: https://github.com/OfflineIMAP/offlineimap/issues/27
Signed-off-by: Eygene Ryabinkin <rea@codelabs.ru>
Added configuration option "auth_mechanisms" to the config file:
it is a list of mechanisms that will be tried in the specified order.
Author: Andreas Mack <andreas.mack@konsec.com>
Signed-off-by: Eygene Ryabinkin <rea@codelabs.ru>
It's nice to set up an ssh tunnel command which forwards an IMAP tcp
port inside an encrypted session, e.g. with ssh's "-W" flag. In this
case the tunnelled connection still requires authentication inside
IMAP session, because this is transport-only tunnel that substitutes
normal TCP/SSL connection.
New directive, 'transporttunnel' was added: it specifies the command
that will create the tunnel. Only one type of tunnel must be
specified for a single repository: we can't have both preauthenticated
and transport-type tunnels, they won't chain together.
From: Steve Purcell <steve@sanityinc.com>
Signed-off-by: Eygene Ryabinkin <rea@codelabs.ru>
- this method isn't as deprecated as IMAP LOGIN;
- it allows to keep hashed passwords on the server side;
- it has the ability to specify that the remote identity
is different from authenticating username, so it even
can be useful in some cases (e.g., migrated mailboxes);
configuration variable "remote_identity" was introduced
to leverage this functionality.
From: Andreas Mack <andreas.mack@konsec.com>
Signed-off-by: Eygene Ryabinkin <rea@codelabs.ru>
They are redundant in all pruned cases and sometimes even create some
problems, e.g., when one tries to jump through paragraphs in vi.
Signed-off-by: Eygene Ryabinkin <rea@codelabs.ru>
