Just clean up lines which end in whitespaces.
Also adapt the copyright to the current year while touching the file.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
In order to optimize performance, we fold the 1st and 2nd pass of our
sync strategy into one. They were essentially doing the same thing:
uploading a message to the other side. The only difference was that in
one case we have a negative UID locally, and in the other case, we have
a positive one already.
This saves some time, as we don't have to run through that function on
IMAP servers anyway (they always have positive UIDs), and 2nd were we
stalling further copying until phase 1 was finished. So uploading a
single new message would prevent us from starting to copy existing
regular messages.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
For each folder we were making a second IMAP request asking for the
latest UID and compared that with the highest UID in our
statusfolder. This catched the case that 1 mail has been deleted by
someone else and another one has arrived since we checked, so that the
total number of mails appears to not have changed.
We don't capture anymore this case in the quickchanged() case.
It improves my performance from 8 to about 7.5 seconds per check (with lots of
variation) and we would benefit even more in the IMAP<->IMAP case as we do one
additional IMAP lookup per folder on each side then.
Do cleanups on whitespaces while in this file.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
quickchanged() was iterating a lot, make use of some of the helper
functions that had been introduced recently and document the function a
bit better. No functional change.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
getmessagelist() is slow for the mapped UID case, so replace some of its
occurences with calls that are optimized for this case, ie
getmessagecount() and uidexists().
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Reviewed-and-tested-by: Vincent Beffara <vbeffara@ens-lyon.fr>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
We are calling getmessagelist() internally a lot, e.g. just to check if
a UID exists (from uidexist()). This is a very expensive operation in
the UIDMapped case, as we reconstruct the whole messagelist dict every
single time, involving lots of copying etc.
So we provide more efficient implementations for the uidexists()
getmessageuidlist() and getmessagecount() functions that are fast in the
UIDMapped case. This should solve the performance regression that was
recently observed in the Mapped UID case.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Reviewed-and-tested-by: Vincent Beffara <vbeffara@ens-lyon.fr>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
Signed-off-by: David Favro <offlineimap@meta-dynamic.com>
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
When uploading a new message to Gmail we need to find out the UID it
assigned it, but Gmail does not advertize the UIDPLUS extension (in all
cases) and it fails to find the email that we just uploaded when
searching for it. This prevented us effectively from uploading to
gmail.
See analysis in
http://lists.alioth.debian.org/pipermail/offlineimap-project/2011-March/001449.html
for details on what is going wrong.
This patch increases compatability with Gmail by checking for APPENDUID
responses to an APPEND action even if the server did not claim to
support it. This restores the capability to upload messages to the
*broken* Gmail IMAP implementation.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
As the LocalStatus and UIDMap backend already did: If the uid already
exists for savemessage(), only modify the flags and don't append a new
message.
We don't invoke savemessage() on messages that already exist in our sync
logic, so this has no change on our current behavior. But it makes
backends befave more consistent with each other.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
- Some documentation improvements, this is a severely underdocumented
class. This still needs some further improvements though.
- Don't use apply(Baseclass) (which is going away in Python 3), use
IMAPFolder.__init__(self, *args, **kwargs).
- Don't call ValueError, string. It is ValueError(string)
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
The biggest change here is that imapobj.untagged_responses is no
longer a dictionary, but a list. To access it, I use the semi-private
_get_untagged_response method.
* offlineimap/folder/IMAP.py (IMAPFolder.quickchanged,
IMAPFolder.cachemessagelist): imaplib2 now explicitly removes its
EXISTS response on select(), so instead we use the return values from
select() to get the number of messages.
* offlineimap/imapserver.py (UsefulIMAPMixIn.select): imaplib2 now
stores untagged_responses for different mailboxes, which confuses us
because it seems like our mailboxes are "still" in read-only mode when
we just re-opened them. Additionally, we have to return the value
from imaplib2's select() so that the above thing works.
* offlineimap/imapserver.py (UsefulIMAPMixIn._mesg): imaplib2 now
calls _mesg with the name of a thread, so we display this
information in debug output. This requires a corresponding change to
imaplibutil.new_mesg.
* offlineimap/imaplibutil.py: We override IMAP4_SSL.open, whose
default arguments have changed, so update the default arguments. We
also subclass imaplib.IMAP4 in a few different places, which now
relies on having a read_fd file descriptor to poll on.
Signed-off-by: Ethan Glasser-Camp <ethan@betacantrips.com>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
imaplib2 has slightly different semantics than standard imaplib, so
this patch will break the build, but I thought it was helpful to have it as
a separate commit.
Signed-off-by: Ethan Glasser-Camp <ethan@betacantrips.com>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
The rfc822 module has been deprecated since python 2.3, and conversion to
the email module is straightforward, so let us do that. rfc822 is
completely gone in python3.
This also fixes a bug that led to offlineimap abortion (but that code path
is apparently usually not exercised so I did not notice:
rfc822|email.utils.parsedate return a tuple which has no named attributes,
but we were using them later in that function. So pass the tuple into a
struct_time() to get named attributes.
While reading the docs, I noticed that email.parsedate returns invalid
daylight savings information (is_dst attribute), and we are using it
anyway. Oh well, the imap server might think the mails are off by an hour
at worst.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
More convenient way to test if a certain uid exists and getting a list
of all uids. Also, the SQL backend will have efficient overrides for
these methods.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
Rather than always having to call len(getmessagelist.keys()) as was done
before. No functional change, just nicer looking code. Also the SQLite
backend or other backends could implement more efficient implementations.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
We only have one "dstfolder" at a time when deleting/adding flags, so no
need to pass in a list of those to the ui functions that output the log
info.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
This enables us to just use the folder instance in the ui output and get
a name rather than having to call getname() all the time.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
The previous syncing strategy was doing more than we needed to and was a
bit underdocumented. This is an attempt to clean it up.
1) Do away with the previous different code paths depending on
whether there is a LocalStatus file or not (the isnewfolder() test). We
always use the same strategy now, which makes the strategy easier to
understand. This strategy is simply:
a) Sync remote to local folder first
b) Sync local to remote
Where each sync implies a 4 pass strategy which does basically the same
as before (explained below).
2) Don't delete messages on LOCAL which don't exist on REMOTE right at
the beginning anymore. This prevented us e.g. from keeping local
messages rather than redownloading everything once LocalStatus got
corrupted or deleted. This surprised many who put in an existing local
maildir and expected it to be synced to the remote place. Instead, the
local maildir was deleted. This is a data loss that actually occured to
people!
3) No need to separately sync the statusfolder, we update that one
simultanously with the destfolders...
3) Simplified the sync function API by only taking one destdir rather
than a list of destdirs, we never used more anyway. This makes the code
easier to read.
4) Added plenty of code comments while I was going through to make sure
the strategy is easy to understand.
-----------------------------------------
Pass1: Transfer new local messages
Upload msg with negative/no UIDs to dstfolder. dstfolder should
assign that message a new UID. Update statusfolder.
Pass2: Copy existing messages
Copy messages in self, but not statusfolder to dstfolder if not
already in dstfolder. Update statusfolder.
Pass3: Remove deleted messages
Get all UIDS in statusfolder but not self. These are messages
that we have locally deleted. Delete those from dstfolder and
statusfolder.
Pass4: Synchronize flag changes
Compare flags in self with those in statusfolder. If msg has a
valid UID and exists on dstfolder (has not e.g. been deleted
there), sync the flag change to dstfolder and statusfolder.
The user visible implications of this change should be unnoticable
except in one situation:
Blowing away LocalStatus will not require you to redownload ALL of
your mails if you still have the local Maildir. It will simply recreate
LocalStatus.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
Removing this lock makes the function not threadsafe, but then it is
only ever called from one thread, the main account syncer. Also, it
doesn't make it worse than most of the other functions in that class
which are also not threadsafe.
Removing this makes the code simpler, and removes the need to import the
threading module.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
Rather than inserting our own home-grown header, everytime we save a
message to an IMAP server, we check if we suport the UIDPLUS extension
which provides us with an APPENDUID reply. Use that to find the new UID
if possible, but keep the old way if we don't have that extension.
If a folder is read-only, return the uid that we have passed in per API
description in folder.Base.py
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
The working horse of the savemessage() function, imaplib.append() was
hidden away in an assert statement. Pull the real functions out of the
asserts and simply assert on the return values. This looks less
convoluted and makes this easier to understand in my opinion.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
savemessage was too long and complex. Factor out the date guessing part
of the function and put it into a function of its own. The logic of the
date guessing is the same, however, we do not use the
imaplib.Time2InternalDate() function as it is buggy
(http://bugs.python.org/issue11024) and returns localized patches. So we
create INTERNALDATE ourselves and pass it to append() as a string.
This commit fixes a bug that international users used to pass an invalid
date to the IMAP server, which the server will either ignore or complain
about.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
savemessage_getnewheader was an undocmented, cryptic and overengineered
function. It generates a new unique value that can be used as a mail
header to be inserted. For this it used LOTS of randomness sources: hash
of the mail content, hash of the folder name, hash of the repository
name, the current time, a random() value, and the offlineimap version string.
All we need is something random. So reduce this to hash of content
appended by a random integer. Sufficient and somewhat faster to calculate.
Rename the function to actually describe accurately what it does or
would you have guessed that savemessage_getnewheader() did nothing more
than returning ('X-OfflineIMAP', <randomstring> )? Rename to
generate_randomheader() to make it clearer what this is all about.
Also document the function, describing what it does, and what it returns.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
There is no need for using the string module if all we want is to split
a string at the white space. All pythons since at least 2.4 can do that.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
We have vonverted all places in folder/* to have self.ui available,
rather than having to use UIBase.getglobalui() all the
time. Unfortunately, we did not convert the users in folder/Base.py.
This patch does it belatedly. This fixes
http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=613483
Signed-off-by: Sebastian Spaeth1 <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
Code was broken, as these backends import UIBase (which had been moved).
However, they don't use it, so we can just delete the import.
Sorry, I failed to find those earlier somehow.
Signed-off-by: Sebastian <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
Signed-off-by: Edward Z. Yang <ezyang@mit.edu>
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
This branch is currently broken, as we were using getglobalui() but it
was not imported. This fixes the missing import and makes offlineimap
run successfully.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
Earlier we would ignore *ALL* Exceptions that could occur during the
fsyncing of our LocalStatus database. Ignoring all Exceptions is not the
right thing here though. A recent commit improved the situation by
raising at least KeyboardInterrupt Exceptions, but that is still not
optimal.
os.fsync() is available on Unix, and Windows starting in python
2.2.3. so it should always work. If it doesn't, something is wrong.
It has been suggested to only catch EnvironmentError (ie SystemError and
OSError) here, but even those should be thrown. Something *is* wrong if
this fails and we should not ignore it.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
Previously we did not catch KeyboardInterrupts explicitly as all of the
code was executed in forked child threads which would never receive
Ctrl-c exceptions. With the upcoming single threaded modus, this code
can be run in the main thread however, so we need to take care of
KeyboardInterrupts explicitly.
This was done wherever we would catch *ALL* exceptions universally and
print out an error message.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
We already import threadutil, so no need to also import
threadutil.InstanceLimitedThread separately.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
Rather than regetting the ui with UIBase.getglobalui() all the time, we get it once in the base class and let all derivative classes just make use of self.ui rather than refetching the ui all the time, this makes for a bit less code and shorter lines.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
Move central constant definitions into __init__.py. This does away
with version.py which contained nothing else and __init__.py is where
things like __VERSION__ are usually defined.
This commit also changes code to use offlineimap.__version__ rather
than offlineimap.version.__version__ as was before. Cleaned up some
duplicate or unneeded imports while touching those, formatting import
statements per PEP8 (one import per row).
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
Change the X-OfflineIMAP header to work around possible Exchange MAPI
table overflow problem described in
http://article.gmane.org/gmane.mail.imap.offlineimap.general/1699
(It is unknown whether this problem still exits in current
Exchange versions, but let's assume the worst.)
The X-OfflineIMAP header is neccessary with some IMAP servers to
reliably determine the UID of a new messages uploaded to the server
by using the "UID SEARCH HEADER name string" command. Since this
command compares header name and value it is sufficient to have
a unique header value and a non-unique header name.
Note that a message can have more than one X-OfflineIMAP header if
the message was copied between IMAP folders multiple times.
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
After tens of thousands of messages on the IMAP server were deleted it
takes offlineimap extremely long time (several hours of high CPU usage)
to delete them locally. It spends almost all the time modifying
LocalStatus. It processes the messages one by one, rewriting the
folder's status file in LocalStatus after each message.
It is much more efficient to save the status file only once, after
removing all the messages from the messagelist.
Deleting lots of messages now takes seconds instead of hours.
This should solve Debian bug #518093:
http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=518093
Signed-off-by: Michal Schmidt <mschmidt@redhat.com>
Dear All,
I have made the attached patch to try and make offlineimap a bit more
stable in challenging situations. It's extremely useful in slow
connection environments - but sometimes if one account had the wrong
password or the connection went down then unfortunately the whole
program would crash.
I have tested this on our connection and tried throwing at it just about
every situation - connection, up down, up, down again, change password,
error whilst copying one message, etc. I have been running this patch
for the last 5 days or so syncing 6 accounts at the moment... It seems
to work and stay alive nicely (even if your connection does not)...
Hope that this can go in for the next release... Please let me know if
anyone notices any problems with this...
Regards,
-Mike
-- Attached file included as plaintext by Ecartis --
-- File: submit
From 1d6777cab23637eb830031c7cab0ae9b8589afd6 Mon Sep 17 00:00:00 2001
From: mike <mike@mikelaptop.(none)>
Date: Mon, 24 Aug 2009 19:37:59 +0430
Subject: [PATCH] This patch attempts to introduce a little more error handling - e.g.
if one account has an error because of a changed password or something
that should not affect the other accounts.
Specifically:
If one sync run has an issue this is in a try-except clause - if it
has an auto refresh period the thread will sleep and try again - this
could be quite useful in the event of the connection going down for a
little while, changed password etc.
If one folder cannot be created an error message will be displayed through
the UI and the program will continue (e.g. permission denied to create a folder)
If one message does not want to copy for whatever resaon an error message
will be displayed through the UI and at least the other messages will
be copied
If one folder run has an exception then the others will still run
Dear All,
Attached is the patch that I have developed to provide maxage and
maxsize options. You can thus sync only the last x days of messages and
exclude large messages. All details in the attached git file.
Regards,
-Mike
-- Attached file included as plaintext by Ecartis --
-- File: submit
From 04fead2b46a79675a5b29de6f2b4088b9c9448e5 Mon Sep 17 00:00:00 2001
From: mike <mike@mikelaptop.(none)>
Date: Sun, 16 Aug 2009 17:00:49 +0430
Subject: [PATCH] Patch to provide maxage and maxsize account options to exclude old/large messages
This is designed to make offlineimap even better for low bandwidth connections.
maxage allows you to specify a number of days and only messages within
that range will be considered by offlineimap for the sync. This can be
useful if you would like to start using offlineimap with a large
existing account and do not want to import large archives of mail.
maxsize allows you to specify the maximum size of a message to consider so
that you can exclude messages with large attachments etc.
In both cases the cachemessagelist function of the folder was modified to ignore
messages that do not meet the criteria. If the criteria are not specified
then the existing code will be executed the same as before. If a message
does not meet the criteria it will be as though this message does not exist
- offlineimap will completely ignore it. It will not have flags updated,
it will not be deleted, it will not be considered at all.
When operating against an IMAP repository a server side search function
is used. This of course requires support for server side search.
I have tested this with either option, no options etc. against IMAP, Maildir
and Gmail. I have run variations of this patch here for the last 3 weeks or
so syncing about 4 accounts normally.
Closes: #535160
Bug#535160: offlineimap fails on encfs (FUSE) due to hard linking
Package: offlineimap
Version: 6.0.3
Severity: normal
Tags: patch
Hi,
if the localrepository is stored on an encfs, offlineimap fails as follows:
OfflineIMAP 6.0.3
Copyright (C) 2002 - 2008 John Goerzen <jgoerzen@complete.org>
This software comes with ABSOLUTELY NO WARRANTY; see the file
COPYING for details. This is free software, and you are welcome
to distribute it under the conditions laid out in COPYING.
***** Processing account pleione
Copying folder structure from IMAP to Maildir
Establishing connection to tunnel:eval `keychain --quiet --eval` && ssh -q mymailhost /usr/sbin/dovecot --exec-mail imap.
Syncing Drafts: IMAP -> Maildir
Syncing INBOX: IMAP -> Maildir
----------8<----------
Syncing net: IMAP -> Maildir
Copy message 360 IMAP[net] -> Maildir[net], LocalStatus[net]
Syncing personal: IMAP -> Maildir
Thread 'Copy message 360 from net' terminated with exception:
Traceback (most recent call last):
File "/var/lib/python-support/python2.4/offlineimap/threadutil.py", line 149, in run
Thread.run(self)
File "threading.py", line 422, in run
self.__target(*self.__args, **self.__kwargs)
File "/var/lib/python-support/python2.4/offlineimap/folder/Base.py", line 282, in copymessageto
newuid = object.savemessage(uid, message, flags, rtime)
File "/var/lib/python-support/python2.4/offlineimap/folder/Maildir.py", line 198, in savemessage
os.path.join(tmpdir, messagename))
OSError: [Errno 1] Operation not permitted
Last 4 debug messages logged for Copy message 360 from net prior to exception:
----------8<----------
As encfs does not support hard linking, the rename of the temporary
message file fails.
This is the only occurrence of hard linking in offlineimap and can be
fixed by using an atomic `os.rename` instead of `os.link`+`os.unlink`.
I have been using the attached patch for more than 1.5 years and have
never again had any problems with offlineimap on encfs.
Regards,
Peter
Paul Hinze <paul.t.hinze@gmail.com> on 2008-12-22 at 19:16:
> I did a bit of debugging and asking around in #python and it turns out
> that because Maildir.py uses a conditional import of md5 from either
> hashlib or the md5 module, the md5.new() call is not always correct.
> The attached patch should fix this problem.
Thanks to Daniel Rall for pointing out that the attachment got stripped
off my last message. Patch follows.
Paul
----
From e01fdfbf62c61c31b514e826e6cc00fb98d88808 Mon Sep 17 00:00:00 2001
From: Paul Hinze <paul.t.hinze@gmail.com>
Date: Mon, 22 Dec 2008 18:42:44 -0600
Subject: [PATCH] Fixing md5 import when hashlib is available
Thanks to habnabit and Rhamphoryncus in #python for help debugging
I created new IMAP folders on my server. In some moment I found offlineimap
crashed. The reason were empty LocalStatus files. From looking at the code I
have no explanation how those files came into existence.
refs deb#469598
Bug report received in Debian. User is having occasional trouble with Gmail
driver crashing, indicates problem may have started after switching to Gmail.
Gmail driver merged to tree in 81b86fb74 on 2008-01-03 and recently released
in beta tarballs.
BT shows:
File "/var/lib/python-support/python2.4/offlineimap/folder/Gmail.py", line 102, in processmessagesflags
attributehash = imaputil.flags2hash(imaputil.imapsplit(result)[1])
File "/var/lib/python-support/python2.4/offlineimap/imaputil.py", line 88, in imapsplit
for i in range(len(imapstring)):
TypeError: len() of unsized object
imap debug log shows:
imap: 29:58.16 > BEAL75 UID STORE 4887 +FLAGS (\Deleted)
imap: 29:58.47 < BEAL75 OK Success
imap: 29:58.47 matched r'(?P<tag>BEAL\d+) (?P<type>[A-Z]+) (?P<data>.*)' => ('BEAL75', 'OK', 'Success')
imap: imapsplit() called with input: None
imap: imapsplit() got a non-string input; working around.
looking at code for Gmail.py processmessagesflags, comments from Ricardo
indicate it was copied from the same function in folder/IMAP.py.
However, folder/IMAP.py has checks for this, added 2002-07-12 in
5342dacc & 817a10ce. Suspect that Gmail author believed those checks
superfluous for Gmail.
Copied checks from folder/IMAP.py to folder/Gmail.py.
This reverts commit 71a76d9a61.
Zak Smith reported a problem at:
self.processmessagesflags('+', uidlist, flags)
File "/usr/lib/python2.5/site-packages/offlineimap/folder/IMAP.py",
line 372, in processmessagesflags
myrights = imapobj.myrights(self.getfullname())[1][0].split()[1]
IndexError: list index out of range
Conflicts:
offlineimap/folder/IMAP.py
closes#22
from pistore in OfflineIMAP #22:
When an IMAP flag update is performed for multiple messages, some IMAP
servers (e.g. Exchange) return the UID attribute only for some of the
FETCH untagged responses, as shown in the following log:
21:19.04 > DCKF8 UID STORE 66050,50613,52164,40043,40055,25874 +FLAGS
(\Deleted)
21:19.36 < * 35 FETCH (FLAGS (\Seen \Deleted) UID 25874)
21:19.36 < * 321 FETCH (FLAGS (\Seen \Deleted))
21:19.57 < * 322 FETCH (FLAGS (\Seen \Deleted))
21:19.57 < * 560 FETCH (FLAGS (\Seen \Deleted))
21:19.57 < * 581 FETCH (FLAGS (\Seen \Deleted) UID 52164)
21:19.62 < * 1022 FETCH (FLAGS (\Seen \Deleted))
21:19.62 < DCKF8 OK STORE completed.
Function IMAPFolder.processmessagesflags is able to manage the servers
which return the UID and the servers which do not return it, but is
not able to deal with the mixed behavior shown above.
The problem is that the fragment of function
IMAPFolder.processmessagesflags that handles the responses with UID
attribute uses variable flags to store the list of flags of the
message in the IMAP format ("flags = attributehashFLAGS?"), while the
fragment that handles the responses without UID expects variable
"flags" to contain the list of modified flags passed to the function
in Maildir format ("self.messagelist[uid]flags?.append(flag)").
As a consequence, the wrong list of flags is used for the messages
without UID, leading to the addition of "strange" flags to the Maildir
messages:
Syncing messages IMAP[INBOX] -> Maildir[.]
Adding flags to 4 messages on Maildir[.]
Adding flags e to 4 messages on Maildir[.]
Adding flags d to 4 messages on Maildir[.]
Adding flags ) to 4 messages on Maildir[.]
Adding flags ( to 4 messages on Maildir[.]
Adding flags l to 4 messages on Maildir[.]
Adding flags n to 4 messages on Maildir[.]
Adding flags t to 4 messages on Maildir[.]
Adding flags \ to 4 messages on Maildir[.]
Adding flags D to 4 messages on Maildir[.]
Deleting flags T to 4 messages on Maildir[.]
Adding flags to 4 messages on LocalStatus[.]
Adding flags e to 4 messages on LocalStatus[.]
Adding flags d to 4 messages on LocalStatus[.]
Adding flags ) to 4 messages on LocalStatus[.]
Adding flags ( to 4 messages on LocalStatus[.]
Adding flags l to 4 messages on LocalStatus[.]
Adding flags n to 4 messages on LocalStatus[.]
Adding flags t to 4 messages on LocalStatus[.]
Adding flags \ to 4 messages on LocalStatus[.]
Adding flags D to 4 messages on LocalStatus[.]
Deleting flags T to 4 messages on LocalStatus[.]
Fix: use a different variable to store IMAP flags when managing
messages corresponding to responses with UID attribute, e.g.:
*** IMAP.py.orig Wed Aug 22 18:23:17 2007
--- IMAP.py Wed Aug 22 18:22:38 2007
*************** class IMAPFolder(BaseFolder):
*** 340,348 ****
if not ('UID' in attributehash and 'FLAGS' in
attributehash):
# Compensate for servers that don't return a UID
attribute.
continue
! flags = attributehash['FLAGS']
uid = long(attributehash['UID'])
! self.messagelist[uid]['flags'] =
imaputil.flagsimap2maildir(flags)
try:
needupdate.remove(uid)
except ValueError: # Let it slide if it's not
in the list
--- 340,348 ----
if not ('UID' in attributehash and 'FLAGS' in
attributehash):
# Compensate for servers that don't return a UID
attribute.
continue
! lflags = attributehash['FLAGS']
uid = long(attributehash['UID'])
! self.messagelist[uid]['flags'] =
imaputil.flagsimap2maildir(lflags)
try:
needupdate.remove(uid)
except ValueError: # Let it slide if it's not
in the list
02/03/08 14:04:35 changed by js
* attachment flags-fix.patch added.
Delete 02/03/08 14:05:24 changed by js
Unfortunately I have to fetch some of my mail from an Exchange server
(Microsoft Exchange Server 2003 IMAP4rev1 server version 6.5.7638.1)
and I can confirm that the analysis of the problem is correct, and the
patch given here fixes the problem.
Looking at the code of the processmessagesflags() method I think it
generally is a bug that the "flags" parameter is reused as a local
variable, since the final "for uid in needupdate:" loop needs the
original value of "flags". This only worked by accident.
I'm attaching a unidiff version of the patch which applies cleanly
against Debian unstable's offlineimap 5.99.4.
New repository/folder classes to support "real deletion" of messages
thorugh Gmail's IMAP interface: to really delete a message in Gmail,
one has to move it to the Trash folder, rather than EXPUNGE it.
This patch maneuvers around python imaplib's mysterious read-only detection
algorithm and correctly calls the UI's deletetoreadonly(), when trying to
delete/expunge in a mailbox without having the necessary rights.
fixes deb#439384
From: martin f krafft
Subject: race condition in Maildir writing
The offlineimap Maildir code checks for file existence and then
opens a file. That's open to a race condition. It's better to open
the file and fail if it already exists. The following patch does
this. It catches OSError 17 (file exists) and re-raises all others.
I'll leave it up to you to decide whether this is appropriate.
fixes deb#433732
Date: Sun, 30 Sep 2007 13:54:56 -0400
From: Daniel Jacobowitz <drow@false.org>
To: offlineimap@complete.org
Subject: Assorted patches
Here's the result of a lazy Sunday hacking on offlineimap. Sorry for
not breaking this into multiple patches. They're mostly logically
independent so just ask if that would make a difference.
First, a new -q (quick) option. The quick option means to only update
folders that seem to have had significant changes. For Maildir, any
change to any message UID or flags is significant, because checking
the flags doesn't add a significant cost. For IMAP, only a change to
the total number of messages or a change in the UID of the most recent
message is significant. This should catch everything except for
flags changes.
The difference in bandwidth is astonishing: a quick sync takes 80K
instead of 5.3MB, and 28 seconds instead of 90.
There's a configuration variable that lets you say every tenth sync
should update flags, but let all the intervening ones be lighter.
Second, a fix to the UID validity problems many people have been
reporting with Courier. As discussed in Debian bug #433732, I changed
the UID validity check to use SELECT unless the server complains that
the folder is read-only. This avoids the Courier bug (see the Debian
log for more details). This won't fix existing validity errors, you
need to remove the local status and validity files by hand and resync.
Third, some speedups in Maildir checking. It's still pretty slow
due to a combination of poor performance in os.listdir (never reads
more than 4K of directory entries at a time) and some semaphore that
leads to lots of futex wake operations, but at least this saves
20% or so of the CPU time running offlineimap on a single folder:
Time with quick refresh and md5 in loop: 4.75s user 0.46s system 12%
cpu 41.751 total
Time with quick refresh and md5 out of loop: 4.38s user 0.50s system
14% cpu 34.799 total
Time using string compare to check folder: 4.11s user 0.47s system 13%
cpu 34.788 total
And fourth, some display fixes for Curses.Blinkenlights. I made
warnings more visible, made the new quick sync message cyan, and
made all not explicitly colored messages grey. That last one was
really bugging me. Any time OfflineIMAP printed a warning in
this UI, it had even odds of coming out black on black!
Anyway, I hope these are useful. I'm happy to revise them if you see
a problem.
--
Daniel Jacobowitz
CodeSourcery
patch from Mike Gerber
Two times today I have found my offlineimap to have died with this same
situation. It appears as if certain types of messages (both spam in my
situation), cause offlineimap to choke. When it does it cannot proceed.
This means that when I run offlineimap, it pulls in messages from some
folders, then it hits the folder with the bad message and dies, leaving
undownloaded mail on the server. The only fix to this problem is to find
the problem message on the server and remove it by hand. This isn't such
a huge deal for me, since I run the server, but other people have to
come to me to ask me to delete these messages, and until I do they
cannot download their email.
I have captured the output by running script during one of these
incidents, this has been attached. Additionally, I have also attach the
problematic message.
The patch seems to work for me, might need some Python wizard and better
testing, though.
fixes deb#396443
r[1] is a list. In case it contains more than one 'str' they are concatenated
using '. '. In processmessagesflags the join is tested, for savemessagesflags I
assume that it is also needed.
I have tested this and Dovecot no longer beats offlineimap
to the punch. (-:
I achieved that by keeping the renames in tmp/ until it finally does
one last rename in new/ or cur/.
fsync the Maildir file, its final directory when writing a new message.
fsync the localstatus file and its final directory when writing the
local status cache.
This should reduce duplication in the event of hardware trouble.
fixes#8
see thread at http://lists.complete.org/offlineimap@complete.org/2007/03/threads.html.gz
The attached patch adds syncing the INTERNALDATE of IMAP folders with
the mtime of messages in maildir folders.
I want this to happen, because I'm running a dovecot over the maildirs
synced by offlineimap, and that uses the mtime as the INTERNALDATE.
When using mutt to view messages I generally sort based on the received
date, which for IMAP folders is the INTERNALDATE.
Since this is the first real coding I've done in Python the patch may
need to be cleaned up some, but it's working pretty well for me. I've
added new messages to each side, and the received date has been
preserved going both ways.
Patch from Nikita V. Youshchenko
From: "Nikita V. Youshchenko"
To: Debian Bug Tracking System
Subject: offlineimap: exception on mail with broken headers (+fix)
Date: Wed, 24 Aug 2005 13:41:08 +0400
Package: offlineimap
Version: 4.0.10
Severity: normal
Tags: patch
Recently I've got an exception (see below) while using offlineimap.
Exception was probably caused by invalid Date header of (likely spam)
message:
Date: Sat, 20 Aug 2005 4294967295:43:18 -0700
From: "Nikita V. Youshchenko"
I trued to use offlineimap and found that while being quite fast on
small folders, it takes up to several minutes (of 100% busy CPU and
almost no network traffic) to sync a folder with 2000+ messages.
While looking into the code, I found why this happens.
In folder/Base.py, in method BaseFolder.syncmessagesto_copy(),
dest.getmessagelist() is called inside a loop, while being a loop
invariant. Similar thing happens in BaseFolder.syncmessagesto_delete()
for self.getmessagelist().
This causes quadratic complexity over folder size.
Moving these calls out of loops make large folder sync fast (several
seconds instead of several minutes for folder with 2000 messages on
700MHz P3).
