If we do not use a SSL connection anyway and if the server supports it,
authenticate automatically with STARTTLS.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
In an IMAP run where we did not have to sync anything, I spend nearly a
fulls second in imaputil.debug() without even having debug output
enabled. imapsplit is mainly called by flagsplit() which will also do
debug output, so we get TONS of nearly duplicate debug output in the log
which makes it really hard to analyze.
Cut down the debug logging in imapsplit, we should be debug logging
stuff at a slightly higher level than here anyway.
This one-line change sped up my folder sync (without having to sync
anything) by 0.5 seconds even when debugging is disabled.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
Previously, we instanciated an MappedImapFolder, and would cleverly (too
cleverly?) invoke methods on it casting it to an IMAPFolder by calling
methods such as: self._mb.cachemessages(self) where self._MB is the class
IMAPFolder and self and instance of MappedImapFolder. If
e.g. cachemessages() invokes a method uidexists() which exists for
MappedImapFolder, but not directly in IMAPFolder, I am not sure if
Python would at some point attempt to use the method of the wrong class.
Also, this leads to some twisted thinking as our class would in same
cases act as an IMAPFolder and in some cases as an MappedImapFOlder and
it is not always clear if we mean REMOTE UID or LOCAL UID.
This commit simplifies the class, by a)doing away with the complex Mixin
construct and directly inheriting from IMAPFOlder (so we get all the
IMAPFOlder methods that we can inherit). We instantiate self._mb as a
new instance of IMAPFolder which represents the local IMAP using local
UIDs, separating the MappedIMAPFolder construct logically from the
IMAPFolder somewhat.
In the long run, I would like to remove self._mb completely and simply
override any method that needs overriding, but let us take small and
understandable baby steps here.
Reported-and-tested-by: Vincent Beffara <vbeffara@gmail.com>
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
sudir->subdir in a debug statement. Thanks ccxCZ on IRC for the heads
up.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
During a sync run, someone might remove or move IMAP messages. As we
only cache the list of UIDs in the beginning, we might be requesting
UIDs that don't exist anymore. Protect folder.IMAP.getmessage() against
the response that we get when we ask for unknown UIDs.
Also, if the server responds with anything else than "OK", (eg. Gmail
seems to be saying frequently ['NO', 'Dave I can't let you do that now']
:-) so we should also be throwing OfflineImapErrors here rather than
AssertionErrors.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
We currently do not allow nametrans rules such as
nametrans = lambda foldername: re.sub('^INBOX$', '', foldername)
because we crash with a traceback when running:
http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=499755
The underlying reason is that we cannot create the "top level" root
directory of the Maildir in the function makefolders(), it will bail
out. John Goerzen intentionally prevented offlineimap from creating the
top-level dir, so that a misconfiguration could not arbitrarily create
folders on the file system. I believe that it should be perfectly
possible to automatically create the root dirctory of the maildir. We
still protect against folder creations at arbitrary places in the file
system though.
This patch cleans up makefolders(), adds documentation, allows to
automatically create rootfolders if needed (using absolute paths) and
adds some robustness in case the folders already exist that we want to
create (rather than simply crapping out).
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Tested-by: Mark Foxwell <fastfret79@archlinux.org.uk>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
I discovered that we do not run ui.terminate in all circumstances, so
make sure that we call with properly at the end of each run (whether in
threaded or single-thread mode).
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
Commit 1754bf4110 introduced a blunder:
- for dirname in os.listdir(toppath) + ['.']:
+ for dirname in os.listdir(toppath) + [toppath]:
...
- if self.getsep() == '/' and dirname != '.':
+ if self.getsep() == '/' and dirname:
This change was plainly wrong and would never have worked, so this
commit reverts above bit. While touching the function, some minor code
documentation, cleanup and limiting line length to 80 chars.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
Commit 1754bf4110 introduced a blunder:
- for dirname in os.listdir(toppath) + ['.']:
+ for dirname in os.listdir(toppath) + [toppath]:
...
- if self.getsep() == '/' and dirname != '.':
+ if self.getsep() == '/' and dirname:
This change was plainly wrong and would never have worked, so this
commit reverts above bit. While touching the function, some minor code
documentation, cleanup and limiting line length to 80 chars.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
Folder.savemessage() is supposed to return the new UID that a backend
assigned, and it BaseFolder.copymessageto() fails if we don't return a
non-negative number in the savemessage() there.
For some reason, the UIDMappedFolder was not returning anything in
savemessage, despite clearly stating in the code docs that it is
supposed to return a UID. Not sure how long this has already been the
case. This patch fixes the UIDMappedFolder to behave as it should.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
During a sync run, someone might remove or move IMAP messages. As we
only cache the list of UIDs in the beginning, we might be requesting
UIDs that don't exist anymore. Protect folder.IMAP.getmessage() against
the response that we get when we ask for unknown UIDs.
Also, if the server responds with anything else than "OK", (eg. Gmail
seems to be saying frequently ['NO', 'Dave I can't let you do that now']
:-) so we should also be throwing OfflineImapErrors here rather than
AssertionErrors.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
Fix a gssapi issue where threads beyond the first would not
be able to authenticate against the imap server. This is
done by using the connection lock around the gssapi
authentication code and resetting (and releasing) the
kerberos state after success so that subsequent connections
may make use of kerberos.
Signed-off-by: Scott Henson <sjh@foolishpride.org>
Reviewed-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
We currently don't care about expiration dates of the servers SSL
certificate. This patch adds a check that fails Cert verification when
it is past its due date. There is no way or option to override this
check.
Unfortunately we only seem to be able to get SSL certificate data when
we passed in a CA cert file? How do we get that date when we don't have
a ca cert file?
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
Previously we were attempting to save out mails according to
http://www.qmail.org/man/man5/maildir.html in 4 steps:
1 Create a unique filename
2 Do stat(tmp/<filename>). If it found a file, wait 2 sec and go back to 1.
3 Create and write the message to the tmp/<filename>.
4 Link from tmp/* to new/*
(we did step 2 up to 15 times) But as stated by
http://wiki1.dovecot.org/MailboxFormat/Maildir (see section 'Issues with
the specification'), this is a pointless approach, e.g. there are race
issues between stating that the filename does not exist and the actual
moving (when it might exist).
So, we can simplify the steps as suggested in the dovecot wiki and
tighten up our safety at the same time.
One improvement that we do is to open the file, guaranteeing that it did
not exist before in an atomic manner, thus our simplified approach is
really more secure than what we had before.
Also, we throw an OfflineImapError at MESSAGE level when the supposedly
unique filename already exists, so that we can skip this message and
still continue with other messages.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
Recommend to upgrade from the previous release. I forgot to change the
Changelog previously. [Update imaplib2 to 2.24]
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
MaildirFolder.messagelist[*]['filename'] was storing the absolute file
paths for all stored emails. While this is convenient, it wastes much
space, as the folder prefix is always the same and it is known to the
MaildirFolder. Just 40 chars in a folder with 100k mails waste >4MB of
space. Adapt the few locations where we need the full path to construct
it dynamically.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
We use getfullname() very often (thousands to millions), yet we
dynamically calculate the very same value over and over. Optimize this
by caching the value once and be done with it.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
In some cases we had offlineimap trying to delete emails that shouldn't
be deleted. E.g. https://bugzilla.redhat.com/show_bug.cgi?id=708898.
It turns out that imaplib2 does not like FETCH responses that are
interrupted by other unsolicited server responses, e.g.
* OK Searched 43% of the mailbox, ETA 0:12\r\n
Bump imaplib2 to a version that can cope with these (legal) responses by
the IMAP server.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
we do:
for msgid in imapdata:
maxmsgid = max(long(msgid), maxmsgid)
and then basically immediately:
maxmsgid = long(imapdata[0])
throwing away the first assignment although the first method of
assigning is the correct one. The second had been forgotten to be
removed when we introduced the above iteration. This bug would fix a
regression with those broken ZIMBRA servers that send multiple EXISTS
replies.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
All months names are 3-letter abbreviated, but accidentally June and
July slipped through. Thanks to the heads up by
Philipp Kern <pkern@debian.org>.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
Previously we hard-coded the imap server name in the case of Gmail
repositories, but often we need a different host name. So, allow people
to specify the hostname via the regular "remotehosteval" and
"remotehost" settings, and only falling back to imap.gmail.com when
nothing has been specified.
Cache the hostname, so we don't evaluate the whole thing each time we
query the host name.
Make the remotehosteval processing more robust, by catching any
Exceptions that occur, and throw a OfflineImapError, that explains where
exactly the error had occured. You can test this, e.g. by setting
remotehosteval to 1/"n" or some other invalid expression.
The whole IMAP.gethost() function has been documented code wise while
going through.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
We currently do not allow nametrans rules such as
nametrans = lambda foldername: re.sub('^INBOX$', '', foldername)
because we crash with a traceback when running:
http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=499755
The underlying reason is that we cannot create the "top level" root
directory of the Maildir in the function makefolders(), it will bail
out. John Goerzen intentionally prevented offlineimap from creating the
top-level dir, so that a misconfiguration could not arbitrarily create
folders on the file system. I believe that it should be perfectly
possible to automatically create the root dirctory of the maildir. We
still protect against folder creations at arbitrary places in the file
system though.
This patch cleans up makefolders(), adds documentation, allows to
automatically create rootfolders if needed (using absolute paths) and
adds some robustness in case the folders already exist that we want to
create (rather than simply crapping out).
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=499755 shows the
cryptic output we have when, e.g. trying to put somethin in our mailDir
root via the nametrans options. This commit adds at least some hint as
to what went wrong using an "assert" message, although the correct thing
is to allow the creation of a maildir in the root folder.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
We were "crashing" with tracebacks when we could not connect to a host,
(e.g. because no service was on the port) and we were getting mysterious
SSL tracebacks when someone tried to connect via SSL to a non-ssl port.
In these cases, we will now throw an nice error message. On python<2.6
where no ssl module exists, we simply won't throw those errors.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
commit 0318c6a [Create LocalStatus or LocalStatusSQLite folders] changes import
of LocalStatus but doesn't preserve magicline.
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
Raise OfflineImapError with severity REPO explaining that the connection failed.
Before, no valuable information was given to the user.
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
Without this patch, we try to NOOP on a bad connection and crash messily.
Signed-off-by: Tom Lawton <tlawton@gmx.de>
Signed-off-by: Ethan Glasser-Camp <ethan@betacantrips.com>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
This commit was originally by James Bunton <jamesbunton@fastmail.fm>.
Signed-off-by: Ethan Glasser-Camp <ethan@betacantrips.com>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
If the server doesn't support IDLE, we fall back to the standard
noop() keepalive.
This commit was originally by James Bunton <jamesbunton@fastmail.fm>.
Signed-off-by: Ethan Glasser-Camp <ethan@betacantrips.com>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
This is the commit that enables IDLE support. In order to do this, we
hijack the keepalive method. Instead of just sending NOOPs, it now
sends IDLE and responds accordingly, thanks to the IdleThread class.
This code was originally by James Bunton <jamesbunton@fastmail.fm>.
Signed-off-by: Ethan Glasser-Camp <ethan@betacantrips.com>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
This encapsulates the logic for sending a keepalive/IDLE call,
including starting a sync if needed.
This code was originally by James Bunton <jamesbunton@fastmail.fm>. I
modified the idle() method to put the select() call after
acquireconnection().
Signed-off-by: Ethan Glasser-Camp <ethan@betacantrips.com>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
Mark this option as experimental and document its shortcomings in
MANUAL.rst.
This code was originally by James Bunton <jamesbunton@fastmail.fm>.
Signed-off-by: Ethan Glasser-Camp <ethan@betacantrips.com>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
This is a regression introduced by commit d5493fe894
[threadutil: explicitly import get_ident from thread].
The threadid attribute was wrongly removed from the ExitNotifyThread class.
Restore it.
Tested-by: Mark Foxwell <fastfret79@archlinux.org.uk>
Reviewed-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
We are missing the import of 'os' python module since commit d839be3c61
(Sat Apr 16 20:33:35 2005 +0100) which was when John switched from SVN to Git.
Happily, it help us today: we still had no feedback for this missing import,
6 years later. So, we can remove the os.exit() call safely.
That beeing said, we still don't know if the above sys.exit() was ever touched.
My guess is that it never was. Keep this (hopefully) commented statement to
ensure the thread terminate and not play too much with the Murphy's law. :-)
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
The semaphorewait()/waitforthread() logic is usefull for IMAP starting
connections. We actually use it in imapserver only.
This patch removes the over-engineered factorized methods. It tend to simplify
the code by cleaning out a chain of two direct calls with no other processes.
Reviewed-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
The python module thread is the low-level module we should avoid to use in favor
of threading. We still need it to support old python because Thread.ident
doesn't exist before python 2.6:
http://docs.python.org/library/threading.html#threading.Thread.ident
Make it clear we should avoid it.
Reviewed-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
- conform to PEP8
- explicitly define symbols instead of 'import *'
- remove unused import
Reviewed-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
