... and not self.filterheaders. With the current code this change
is no-op (since self.filterheaders is always passed as header_list),
but it is a bug in general.
Signed-off-by: Eygene Ryabinkin <rea@codelabs.ru>
If when we request a LocalStatus folder, the folder has to be created,
we look whether the other backend has data, and if it does we migrate
it to the new backend.
The old backend data is left untouched, so that if you change back say
from sqlite to plaintext, the older data is still there. That should
not lead to data loss, only a slower sync while the status folder gets
updated.
Signed-off-by: Eygene Ryabinkin <rea@codelabs.ru>
* Do not inherit LocalStatusSQLiteFolder class from the plaintext
one.
* Use some functions already in BaseFolder in both, plaintext and
sqlite classes.
* Add a saveall method. The idea is that saveall dumps the entire
messagelist to disk, while save only commits the uncommited
changes. Right now, save is noop for sqlite, and equivalent to
saveall for plaintext, but it enables to be more clever on when we
commit to disk in the future.
Signed-off-by: Eygene Ryabinkin <rea@codelabs.ru>
* Implements Status Folder format v2, with a mechanism to upgrade an
old statusfolder.
* Do not warn about Gmail and GmailMaildir needing sqlite backend
anymore.
* Clean repository.LocalStatus reusing some code from
folder.LocalStatus.
* Change field separator in the plaintext file from ':' to '|'. Now
the local status stores gmail labels. If they contain field
separator character (formerly ':'), they get messed up. The new
character '|' is less likely to appear in a label.
Signed-off-by: Eygene Ryabinkin <rea@codelabs.ru>
Format headers X-Label and Keywords as a space separated list and all
other ones as comma-separated entities. This makes OfflineIMAP label
handling to be compatible with some user agents that recognise these
headers.
Signed-off-by: Eygene Ryabinkin <rea@codelabs.ru>
When synclabels config flag is set to "yes" for the GMail repo,
offlineimap fetches the message labels along with the messages, and
embeds them into the body under the header X-Keywords (or whatever
'labelsheader' was set to), as a comma separated list.
It also adds an extra pass to savemessageto, that performs label
synchronization on existing messages from GMail to local, the same way
it is done with flags.
We also introduce GmailMaildir repository that adds functionality to
change message labels. It keeps track of messages modification time,
so one can quickly detect when the labels may have changed.
Signed-off-by: Eygene Ryabinkin <rea@codelabs.ru>
In preparation for GMail label sync, we had split our some functionality
that will be needed further into their own functions. This also permitted
the code to look more compact and concise.
Signed-off-by: Eygene Ryabinkin <rea@codelabs.ru>
When filterheaders is set to a comma-separated list of headers,
OfflineIMAP removes those headers from messages before uploading them
to the server.
Signed-off-by: Eygene Ryabinkin <rea@codelabs.ru>
Since we just do multiple passes for saving the message without
actually modifying its content (apart from header insertion that
is CRLF-clean), we can change line ends to the proper CRLF just
once.
And we can also get message's date only once too.
Signed-off-by: Eygene Ryabinkin <rea@codelabs.ru>
Added the configuration setting usecompression for the IMAP repositories.
When enabled, the data from and to the IMAP server is compressed.
Signed-off-by: Eygene Ryabinkin <rea@codelabs.ru>
Make external API of class/module to be smaller, explicitely mark
all internal functions. Also annotate methods that are implemented
as the part of the parent class interface.
Signed-off-by: Eygene Ryabinkin <rea@codelabs.ru>
Allow people who want folder filtering to depend on the external
conditions or to make it dynamic for other reasons, to do what
they want.
New repository configuration knob 'dynamic_folderfilter' was
introduced; it defaults to 'False' that matches historical behaviour.
GitHub: #73
Signed-off-by: Eygene Ryabinkin <rea@codelabs.ru>
This commit fixes the case when we're invoking releaseconnection()
for a given imapobj twice.
This bug manifests itself as
{{{
ValueError: list.remove(x): x not in list
File "[...]/offlineimap/folder/IMAP.py", line 615, in savemessage
self.imapserver.releaseconnection(imapobj)
File "[...]/offlineimap/imapserver.py", line 130, in releaseconnection
self.assignedconnections.remove(connection)
}}}
Signed-off-by: Eygene Ryabinkin <rea@codelabs.ru>
When imaputil was parsing quoted strings, it treated "abcd\\"
as incomplete quoted string having escaped quote, rather than
properly-quoted string having escaped backslash.
GitHub issue: https://github.com/OfflineIMAP/offlineimap/issues/53
Signed-off-by: Eygene Ryabinkin <rea@codelabs.ru>
2.36 it includes support for SSL version override that was integrated
into our code before, no other changes.
Signed-off-by: Eygene Ryabinkin <rea@codelabs.ru>
- Fix for Gmail sending a BYE response after reading >100 messages
in a session.
- Includes fix for GitHub#15: patch was accepted upstream.
Signed-off-by: Eygene Ryabinkin <rea@codelabs.ru>
Second argument is exception traceback, not the message; without this
tracebacks like mentioned in
http://permalink.gmane.org/gmane.mail.imap.offlineimap.general/5712
were happening when this exception handling block was hit.
Signed-off-by: Eygene Ryabinkin <rea@codelabs.ru>
This greatly simplifies developer's life and will, possibly, allow
users familiar with Python to debug and fix the problems by
themselves.
We, possibly, should not give tracebacks for the problems like
"can't open connection", but this is up to the caller of this
routine not to provide traceback in this case.
Signed-off-by: Eygene Ryabinkin <rea@codelabs.ru>
self._expecting_data was used both as the expected data length and the
flag that we expect some data. This obviously fails when advertized
data length is zero, so self._expecting_data_len was introduced to
hold the length of the expected data and self._expecting_data was left
as the flag that we expect the data to come.
GitHub issue: https://github.com/OfflineIMAP/offlineimap/issues/15
Signed-off-by: Eygene Ryabinkin <rea@codelabs.ru>
It is called localfolders and holds expanded name for the same
variable for the local repository of the account that is being
processed.
GitHub issue: https://github.com/OfflineIMAP/offlineimap/issues/21
Signed-off-by: Eygene Ryabinkin <rea@codelabs.ru>
Bring the description in the template offlineimap.conf in sync to the
actual implementation: pass folder names to the sorting function, not
the offlineimap.folder.IMAP.IMAPFolder objects themselves.
GitHub issue: https://github.com/OfflineIMAP/offlineimap/issues/27
Signed-off-by: Eygene Ryabinkin <rea@codelabs.ru>
Global or per-repository option utime_from_message tells OfflineIMAP
to set file modification time of messages pushed from one repository
to another basing on the message's "Date" header.
This is useful if you are doing some processing/finding on your
Maildir (for example, finding messages older than 3 months),
without parsing each file/message content.
From: Cyril RUSSO <boite.pour.spam@gmail.com>
Signed-off-by: Eygene Ryabinkin <rea@codelabs.ru>
Added configuration option "auth_mechanisms" to the config file:
it is a list of mechanisms that will be tried in the specified order.
Author: Andreas Mack <andreas.mack@konsec.com>
Signed-off-by: Eygene Ryabinkin <rea@codelabs.ru>
It's nice to set up an ssh tunnel command which forwards an IMAP tcp
port inside an encrypted session, e.g. with ssh's "-W" flag. In this
case the tunnelled connection still requires authentication inside
IMAP session, because this is transport-only tunnel that substitutes
normal TCP/SSL connection.
New directive, 'transporttunnel' was added: it specifies the command
that will create the tunnel. Only one type of tunnel must be
specified for a single repository: we can't have both preauthenticated
and transport-type tunnels, they won't chain together.
From: Steve Purcell <steve@sanityinc.com>
Signed-off-by: Eygene Ryabinkin <rea@codelabs.ru>
- this method isn't as deprecated as IMAP LOGIN;
- it allows to keep hashed passwords on the server side;
- it has the ability to specify that the remote identity
is different from authenticating username, so it even
can be useful in some cases (e.g., migrated mailboxes);
configuration variable "remote_identity" was introduced
to leverage this functionality.
From: Andreas Mack <andreas.mack@konsec.com>
Signed-off-by: Eygene Ryabinkin <rea@codelabs.ru>
- created helper routine that will do authentication;
- routine tries each method in turn, first successful
one terminates it: makes things easier to read
and handle;
- renamed plainauth() inside offlineimap/imapserver.py
to loginauth(): the function does IMAP LOGIN authentication
and there is PLAIN SASL method, so previous name was
a bit misleading;
- slightly improved error reporting: all exceptions during
authentication will be reported at the end of the run;
- now loginauth() is never called if LOGINDISABLED is advertized
by the server; it used to be invoked unconditionally when
CRAM-MD5 fails, but we should respect server's opinion on
how to handle its users.
Signed-off-by: Eygene Ryabinkin <rea@codelabs.ru>
IMAP servers can return `NO` responses to the `APPEND` command,
e.g. here's an example response from Groupwise's IMAP server:
NO APPEND The 1500 MB storage limit has been exceeded.
In this case, savemessage() should abort the repository sync rather
than returning UID 0 which would cause the local copy of the message
being saved to get irreversibly deleted.
Signed-off-by: Adam Spiers <offlineimap@adamspiers.org>
Signed-off-by: Eygene Ryabinkin <rea@codelabs.ru>
mutt-sidebar and, probably, other MUA show mailboxes in the order
they are listed in the file written by mbnames. Therefore, to allow
customization of the order with which mailboxes are listed, introduce
the new 'sort_keyfunc' directive in the [mbnames] section.
'sort_keyfunc' must be a function that will be called once for each
mailbox. It must accept the only argument -- a dict with 2 items,
'accountname' and 'foldername', and should return an object that
will be used as the sorting key for each mailbox.
Default key function returns (d['accountname'], d['foldername']),
thus sorting by account name and then by the folder name.
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Eygene Ryabinkin <rea@codelabs.ru>
Make IDLE syncs be equal to the regular synchronisations
in respect to pre-sync and post-sync hooks.
From: mxgr7 <maxgerer@gmail.com>
Signed-off-by: Eygene Ryabinkin <rea@codelabs.ru>
Run the locked code under 'with': this guarantees that lock
will be released in any case.
This modification also avoids the case when our thread wasn't running
locked when exception was caught, another thread got the lock, our
code checked it via self.connectionlock.locked() and errorneously
released the lock thinking that is was running locked.
Signed-off-by: Eygene Ryabinkin <rea@codelabs.ru>
They are redundant in all pruned cases and sometimes even create some
problems, e.g., when one tries to jump through paragraphs in vi.
Signed-off-by: Eygene Ryabinkin <rea@codelabs.ru>
We now allow setting the SSL version used when connecting to IMAPS servers, and
do so via the `ssl_version` configuration option. We default to the current
practice (letting python's "ssl" library automatically detect the correct
version). There are however rare cases where one must specify the version to
use.
Signed-off-by: Ryan Kavanagh <rak@debian.org>
This eases testing of option values inside the code. This instance
is implemented as the read-only copy of the obtained 'options' object,
so callers won't be able to modify its contents.
Signed-off-by: Eygene Ryabinkin <rea@codelabs.ru>
The problem lies in the fact that offlineimap.folder.Base's method
syncmessagesto_copy() uses threaded code everytime it is suggested by
the derived class's suggeststhreads() (currently, only IMAP does this
suggestion), but offlineimap/init.py will not spawn the
exitnotifymonitorloop() from offlineimap.threadutil.
The root cause is that ExitNotifyThread-derived threads need
offlineimap.threadutil's exitnotifymonitorloop() to be running the
cleaner for the exitthreads Queue(), because it fills the queue via
the run() method from this class: it wants to put() itself to the
Queue on exit, so when no exitnotifymonitorloop() is running, the
queue will fill up. And if this thread is an instance of
InstanceLimitedThread that hits the limit on the number of threads,
then it will hold the instancelimitedsems[] semaphore will prevent
other InstanceLimitedThread()s of the same name to pass its start()
method.
The fix is to avoid using threaded code if we're running
single-threaded.
Signed-off-by: Eygene Ryabinkin <rea@codelabs.ru>
Obtained-from: X-Ryl669 <boite.pour.spam@gmail.com>
This is handy when we're debugging the thread locks: we can try to
understand which thread does what and how it was called.
Signed-off-by: Eygene Ryabinkin <rea@codelabs.ru>
offlineimap has several frontends that encourage running it from a
terminal under an X session. When X session closes for a system
shutdown, the terminals exit, after sending SIGHUP to their children.
Previously SIGHUP was treated to be equivalent to SIGUSR1, i.e. wake
up and sync all accounts. This causes delays during shutdown.
According to Wikipedia [0], SIGHUP has been repurposed from a
historical meaning to one of:
* re-read configuration files, or reinitialize (e.g. Apache, sendmail)
* controlling pseudo or virtual terminal has been closed
I believe second meaning is more appropriate for offlineimap, and
hence this patch makes SIGHUP to be handled in the same way SIGTERM
and SIGINT are handled.
[0] http://en.wikipedia.org/wiki/SIGHUP
Debian-Bug: http://bugs.debian.org/670120
Reported-By: Steve Langasek <steve.langasek@canonical.com>
Signed-off-by: Dmitrijs Ledkovs <xnox@debian.org>
Signed-off-by: Eygene Ryabinkin <rea@codelabs.ru>
Fix imapfolder.getmessageinternaldate misparsing the Date:
header from emails due to a bug or surprising behaviour by
email.utils.parsedate. This is because email.utils.parsedate's
return value contains the unadjusted hour value from the string
parsed but does not include information about the time zone in
which it is specified. For example (Python 2.7.3):
$ python -c "import email.utils;
print email.utils.parsedate('Mon, 20 Nov 1995 19:12:08 -0500')"
(1995, 11, 20, 19, 12, 8, 0, 1, -1)
(the -1 is the isdst field); the -0500 time zone is completely
ignored, so e.g. the same input with time "19:12:08 +0300" has
the same result. When passed to time.struct_time as allowed per
the parsedate documentation, this time is interpreted in GMT and
thus deviates from the correct value by the timezone offset
(in this example, -5 hours).
I consider this a bug in email.utils.parsedate: In my opinion,
since the return value of the parsetime doesn't include a timezone,
it should be expressed in terms of UTC rather than in terms of the
time zone from the Date header; the existence of
email.utils.parsedate_tz, to which I've switched, indicates that
maybe the authors were aware of this problem.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Previous commit e7ca5b25cb combined
checks for filtered folders in one place. However, it turns out there
was a reason to have them separate. getfolder() on a non-existent Maildir
fails and there might not be an equivalent local Maildir folder for a
filtered out IMAP folder.
Fix this by first checking if the remote folder should be filtered, and
only then retrieving the local folder (which should exist then).
This bug was found by our test suite!
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
the LocalStatus._folders cache was changed to be a dict that can be
searched for names. One instance were _folders was set to "None" was
accidentally left over. Fix this.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
commit e94642bb4d centralized folder filtering by using the
repository.should_sync_folder() function. Therefore there is no need
to check for folderfilter in the Maildir backend separately.
Origina patch by Dave, split into 3 by Sebastian
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Rather than later when retrieving them by IMAP, we determine the
"sync_this" value of a folder on Folder() initialization.
This also fixes a bug where folder structure was not propagated when
a folder was filtered out but included in the folderincludes list.
Patch by Dave, split and modified slightly by Sebastian
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
- Factor out the code to find a local folder given a remote folder
Patch by Dave, split and modified by Sebastian.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
If we ask twice for a LocalStatusFolder via getfolder(), we would
get a newly created instance each time. This can lead to problems,
as e.g. write locks protecting files only work within the same Folder
instance. Make it so, that we cache all Folder instances that we have
asked for and hand back the existing one if we ask again for it,
rather than recreate a new instance.
Also, make getfolders() a noop for LocalStatus. We attempted to
derive the foldername from the name of the LocalStatusfile. However,
this is not really possible, as we do file name mangling
(".$" -> "dot", "/" -> ".") and there is no way to get the original folder
name from the LocalStatus file name anyway.
This commit could potentially solve the "file not found" errors, that people
have been seeing with their LocalStatusCache files. If we have 2
instances of a LocalStatusFolder pointing to the same file, our locking
system would not work.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
When logging to a file using the -l switch, we would still write an initial
banner to the file. This was never intended. Quiet should be really quiet
unless it experiences an error. Simplify the logging statement, to do nothing
if logevel is set to "WARNING" aka quiet.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
While looking at the code to investigate if an why we sometimes don't
seem to honor the write lock, I made it use the more modern "with lock:"
pattern.
Still have not found out how we could ever be using 2 instances of the
LocalStatusFolder for the same folder.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
If we throw an OfflineImapError in case of the Repository()
initialization, we display the nice error message and exit rather
than bomb out with a traceback. Misconfiguring a repository name in
the configuration file is now nicely pointed out to the user.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
When misconfiguring OLI, e.g. by specifying a repository name that was
not configured anywhere, we would bomb out with cryptic "NoSectionError".
Throw OfflineImapError that explains what has happened. We still need to
avoid throwing exceptions with Tracebacks here though.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
If 'readonly' is True, folders shouldn't be created (regardless of
'createfolders' option). With old behavior, instead folders were always created
when 'readonly' is True (even if 'createfolders' was also False), which is a
serious bug (offlineimap was creating folders in all read-only repositories).
'createfolders' should only play a role if 'readonly' is False, in which case
folders should only be created if 'createfolders' is True.
Submitted-by: Vladimir Nesov <robotact@gmail.com>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
This will allow our callers who are capable of dealing with
readonly folders to properly detect this condition and act
accordingly.
One example is Gmail's "Chats" folder that is read-only,
but contains logs of the quick chats.
Minor Changelog improvements.
Tested-by: Abdó Roig-Maranges <abdo.roig@gmail.com>
Signed-off-by: Eygene Ryabinkin <rea@codelabs.ru>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
As Gmail was only announcing the presence of the UIDPLUS extension
after we logged in, and we were then only getting server
capabilities before, a hack was introduced that checked the
existence of an APPENDUID reply, even if the server did not claim
to support it.
However, John Wiegley reports problems, where the APPENDUID would
be None, and we attempt to go this path (it seems that imaplib2
returns [None] if there is no such reply, so our test here for "!="
might fail. Given that this is an undocumented imaplib2 function
anyway, and we do fetch gmail capabilities after authentication,
this hack should no longer be necessary.
We had problems there earlier, where imapobj.response() would
return [None] although we had received a APPENDUID response from
the server, this might need more debugging and testing.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
By default OfflineImap propagates new folders in both
directions. Sometimes this is not what you want. E.g. you might want
new folders on your IMAP server to propagate to your local MailDir,
but not the other way around. The 'readonly' setting on a repository
will not help here, as it prevents any change from occuring on that
repository. This is what the `createfolders` setting is for. By
default it is `True`, meaning that new folders can be created on this
repository. To prevent folders from ever being created on a
repository, set this to `False`. If you set this to False on the
REMOTE repository, you will not have to create the `Reverse
nametrans`_ rules on the LOCAL repository.
Also implement a test for this
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Reported by sharat87 in https://github.com/spaetz/offlineimap/pull/38,
he would often get an unhandled Exception when trying to
releaseconnection() a connection that was not in the pool of
connections.
The reason this could happen is that when folder.IMAP.quickchanged()
raises an Exception in select(), we would release the connection in the
"except" handling, and than release the same connection in the "finally"
clause, which led to the error. The right thing is to only release the
connection once, of course.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
As reported by James Cook, we would not check the fingerprint of the SSL
server, as we were looking for the 'ssl' module in locals() rather than
globals(). Ooops!
Rather than using globals() though, I simply remove the by-now
superfluous check. We now rely on python2.6 and we unconditionally
import the SSL module in any case, so it needs to be there.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
The warn() method tries to set the color to red. This leads to a garbled
tty after endwin() has been called. So lets simply use the UIBase
implementation.
Signed-off-by: Christoph Höger <christoph.hoeger@tu-berlin.de>
Somehow we failed if no dry-run setting had been specified in the config
file. This got caught thanks to extending the test suite with a stock
configuration.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
In 2.6 all logging classes are not the new-style ones, so they
have no mro() method and, thus, we can't use super() for them.
Since CursesLogHanler is singly-inherited method, there will
be no problems in usage of the explicit superclass name.
Signed-off-by: Eygene Ryabinkin <rea@codelabs.ru>
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
We autodetect the folder separator on IMAP servers and ignore any 'sep'
setting in the repository section for IMAP servers. Detect if there is
such a setting and warn the user about it.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Previously folderfilters had to match both the local AND remote
name which caused unwanted behavior in combination with nametrans
rules. Make it operate on the untranslated remote names now and
clarify in the command line option help text.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
This reverts commit 4d47f7bf3c.
This is one of two candidates for introducing the instabilities that
John Wiegley observed. We need to reintroduce with careful testing only.
The original patch has been mostly reverted.
This reverts commit 47390e03d6.
It is one of two potential candidates for the APPENDUID
regression that John Wiegley reported. We need to examine this
carefully before reintroducing this patch.
Resolved Changelog.draft.rst conflict.
Prevent savemessage(), and savemessageflags() to occur in dryrun mode in
all backends. Still need to protect against deletemessage().
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
IMAP, Maildir, and LocalStatus abort if in dry-run mode. IMAP and Maildir
will log that they "would have" created a new folder.
This will probably fail later on as we can not cache messagelists on
folder that don't exist, so --dry-run is not yet safe when new folders
have been created.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
1) Set attribute self.dryrun depending on whether we are in dry-run mode.
2) Don't actually call hooks in --dry-run (just log what you would
invoke
3) Don't write out the mbnames file in --dry-run mode.
Repository, and Folder levels still need to be protected in dry-run mode
as of now.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
And set the [general]dry-run=True setting if yes. It is not used yet.
Also set ui.dryrun to True so we can output what WE WOULD HAVE DONE in
dryrun mode.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
A convenience helper function that allows to set a configuration value
if the user has not explicitly configured anything ie the option does
not exist yet in the configuration. It won't do anything, if the option
exists.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Bail out with a better Exception and error text. The whole mapped
UID situation needs to be improved though.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
If we cannot identify the new UID after a sendmessage(), log a better error
message, including the server response for better debugging.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
While improving the test suite, I noticed that we would not create folders on
the remote in some cases when we should (yay for test suites!). This is because
we were testing the untransposed LOCAL foldername and check if it existed on
the remote side when deciding whether we should potentially create a new folder.
Simplify the code by transposing the LOCAL folder names in dst_hash, saving us
to create another confusing "newsrc" temp variable. Make the code a bit more
readable by using dst_name_t to indicate we operate a transposed folder name.
This now passes test 03 (using invalid nametrans rules) when test 03 would pass
before.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Rename variable src_name to src_name_t to indicate that it is the transposed
name. Also rather than testing the hash thingie, we can simply test for
"if source_name_t in dst_folders" now.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
This allows to compare folders directly with strings. It also allows
constructs such as "if 'moo' in repo.getfolders()".
See the code documentation for the exact behavior (it basically is equal if
it's the same instance *or* a string matching the untranslated folder name.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
By default we sort folders alphabetically (for IMAP) according to their
transposed names. For python3, we need to bend a bit backwards to still
allow the use of a cmp() function for foldersort. While going through, I
discovered that we never sort folders for Maildir.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
There is no need to cast 0 to 'long' even if we want to compare it to long
numbers in modern pythons.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
This won't work in python3 anymore, so just use sorted() when needed.
In one case, we could remove the sort() completely as were were sanity checking
one line above, that we only having one UID as response which makes sorting
unneeded.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
class BaseRepository(object, CustomConfig.ConfigHelperMixin):
led to TypeError: Cannot create a consistent method resolution
order (MRO) for bases ConfigHelperMixin, object. Switching the inherited
classes helps.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Replace low-level thread.get_ident() with threading.currentThread().ident.
This works both in python2.6 and python3. (thread is renamed _thread and its
direct use is not recommended)
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
all we want to know is if we got some string'ish type and testing for isinstance
'basestring' is sufficient for that. Remove the import.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
All we want to do here is to test whether we got a string'ish type or a list
(literal), so testing for basestring will be fine.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
'set' is builtin since python2.6, so remove the imports. Also 'ssl' exists
since 2.6 and has everything we need, so no need for conditional import
tests here anymore.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
This import failed in python3, we need to either specify "." (relative) or
from OfflineImap.ui. (absolute). Done the latter.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
To have the code work in python3, we need to convert all occurences of
raise Exception, "text" to be proper functions. This style also adheres to PEP8.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
We do not use ui.locked() anymore to output an error message, the text comes
directly from the exception.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Attempt to load first ConfigParser and then configparser. At some point this
should be switched to do the python3 thing first.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
We mean the (numeric) logging level here and not the info() function.
logger.isEnabledFor() takes the logging level as argument,
obviously. This was a stupid typo that failed under python3.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
It can lead to potential dataloss (see recent commit log where I added a
scary warning about it to offlineimap.conf).
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Blinkenlights does not work well (at all) when using the --info
switch. All we really want here is an output that can be pasted as
debugging information.
Enforce the usage of the "Basic" ui, when the --info switch is used.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Most servers support the UIDPLUS extension, and we don't have to search
headers after each uploaded message. There is no need to CHECK the imap
server after each message when there is no need to search headers.
I have not measured the performance impact on real world servers, but
this lets us do less unneeded work in the common case.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
We were not cleaning out possibly existing APPENDUID messages before
APPENDing a new message. In case an old message were still hanging
around, this could *possibly* lead to retrieving and old UID. Things
should have been fine, but we do want to play safe here.
Also, make use of the "official" imaplib2 .response() command rather
than the internal _get_untagged_response() function.
Remove the hack that we would be looking for APPENDUID responses even if
the server claimed not to support the UIDPLUS ext. We now poll server
CAPABILITIES after login, and Gmail does provide us with the UIDPLUS
capability after login.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
We used "self" but the paramter was called "s". Fixes a crash when we
ui.warn() (only when using the MachineUI).
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
imaputil.imapsplit did not cope with strings that contained encoded
quotation marks, e.g. a folder name '"Make" Magazine' would fail and
crash OfflineImap. Make it work by adapting the regex that we use to
extract the first quote to also work with encoded \" quotes. (We do no
sanity checks that there is an even number of such marks within a string
though)
This commit makes such folders work. This was reported and analyzed by
Mark Eichin.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Conflicts:
Changelog.draft.rst
Rename getuidvalidity -> get_uidvalidity and cache the IMAP result.
1) Start modernizing our function names using more underscores
2) IMAPs implementation of get_uidvalidity was removing the UIDVALIDITY result
from the imaplib2 result stack, so subsequent calls would return "None".
As various functions can invoke this, this led to some errors that we
avoid by caching the current UIDVALIDITY value in the Folder instance.
There are more simplifications and improvements to be made.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
commit f2a94af5 introduced the use of time.sleep in ui/TTY.py without
importing it. This caused a regression in 6.5.2, crashing OfflineIMap
when in refresh mode.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
We were using super() on a class derived from logging.Formatter() which
worked fine in python 2.7. Apparently python 2.6 uses old-style classes
for this, so the TTYUI broke and crashed OfflineImap. This was
introduced in OLI 6.5.0, I think.
Fix it by calling logging.Formatter.... directly, rather than the
elegant super() (which I happen to like a lot more than is appropriate
in the python world).
Reported by Nik Reiman as github issue 23, should fix that issue.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
When deleting many (eg 2000) mails using the SQLITE backend, this takes
a long time durig which OfflineImap can not be aborted via
CTRL-C. Thinking it had frozen permanently, I killed it hard, leaving a
corrupted db journal (which leads to awkwards complaints by OLI on
subsequent starts!). That shows that delete performance is critical and
needs improvement.
We were iterating through the list of messages to delete and deleted
them one-by-one execute()'ing a new SQL Query for each message. This
patch improves the situation by allowing us to use executemany(), which
is -despite still being one SQL query per message- much faster. This is
because rather than performing a commit() after each mail, we now do
only one commit() after all mails have been deleted.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
OfflineIMAP v6.5.2-rc1 (2012-01-09)
===================================
Commits v6.5.1.1 - v6.5.2-rc1:
note: Proper Changelog still in Changelog-draft.rst
d72bb88 Improve error message
3284e01 Revert "use .response() rather _get_untagged_response()"
81f194a mbnames should write out local and not nametransformed box names
7184ec2 Sanity check return value of UIDVALIDTY response
50de217 Allow to pass 'force' arg to selectro() to enforce a new select
ed71805 Changelog entry about "realdelete" option
0a275b9 Add scary warnings about "realdelete" option
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Recently the internal function use of imaplib2's _get_untagged_response()
was switched to use the public documented .response() function (which
should return the same data). However within a few fays we received reports
that both uses of a) the UIDVALIDITY fetching and b) the APPENDUID fetching
returned [None] as data although the IMAP log definitely shows that data
was returned. Revert to using the undocumented internal imaplib2 function,
that seemed to have worked without problems. This needs to be taken up to
the imaplib2 developer.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Rather than to write out the nametrans'lated folder names for mbnames,
we now write out the local untransformed box names. This is generally
what we want. This became relevant since we support nametrans rules on
the local side since only a short time. Reported by Paul Collignan.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
We have a reported case where response('UIDVALIDITY') returned [None]
which results in an ugly non-intuitive crash. Sanity check and report
something nicer.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Pass through the 'force' argument from selectro() to select() so that it
can also enforce a new SELECT even if we already are on that folder.
Also change the default parameter from '0' to 'False' to make clear that
this is a Bool.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Add a changelog to W. Trevor King's previous commit. Also make wording a
bit more consistent and and remove a now unneeded comparison (dirname is
always set when extension is set).
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
On Tue, Dec 13, 2011 at 12:00:57PM -0500, W. Trevor King wrote:
> I've attached a patch that does fix the problem…
Oops, *now* I've attached the patch and logs ;).
--
This email may be signed or encrypted with GnuPG (http://www.gnupg.org).
For more information, see http://en.wikipedia.org/wiki/Pretty_Good_Privacy
From 3067b1b4dfb00d165bd9480ea49f446adb12991d Mon Sep 17 00:00:00 2001
From: W. Trevor King <wking@drexel.edu>
Date: Tue, 13 Dec 2011 11:26:00 -0500
Subject: [PATCH] Only scan children in _getfolders_scandir if extension is set.
When sep is '/', MaildirRepository._getfolders_scandir recursively
checks sub-directories for additional maildirs. The old loop logic
always checked the top directory and its children. This lead to
children being found twice, once from their parent, with dirname
matching their directory name, and once from themselves, with a
dirname of ''.
This patch fixes the problem by only checking the top directory when
extension is not set (i.e. for the root directory).
Do not read in custom maildir flags, or we would try to sync them over
the wire. The next step will be to merge flag writes with existing
custom flags, so we don't lose information.
The long term goal will be to attempt to sync flags to the other side,
of course.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Blinkenlights UI 6.5.0 regression fixes only.
* Sleep led to crash ('abort_signal' not existing)
* Make exit via 'q' key work again cleanly
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
With the new abort signal handler, we can send a signal that lets us
exit cleanly. Make use of this, rather than crashing out in ugly ways.
This affects only the Blinkenlights UI when pressing 'q'.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
This is a regression introduced when renaming signals due to the
improved CTRL-C handling. Regression in 6.5.0
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
OfflineIMAP v6.5.1 (2012-01-07) - "Quest for stability"
=======================================================
* Fixed Maildir regression "flagmatchre" not found. (regressed in 6.5.0)
* Have console output go by default to STDOUT and not STDERR (regression
in 6.5.0)
* Fixed MachineUI to urlencode() output lines again, rather than
outputting multi-line items. It's ugly as hell, but it had been that
way for years.
* Remove the old global locking system. We lock only the accounts that
we currently sync, so you can invoke OfflineImap multiple times now as
long as you sync different accounts. This system is compatible with
all releases >= 6.4.0, so don't run older releases simultanous to this
one.
THe new logging framwork spit putput to STDERR by default (as that is
pythons default), but we used to have STDERR, so make it go there again.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
We were using the internal imaplib2 _get_untagged_response() functions a
few times. Replace 3 of these calls with 2 calls to the public function
response() rather than fudging with internals that could change anytime.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Remove the old global locking system. We lock only the accounts that we
currently sync, so you can invoke OfflineImap multiple times now as long
as you sync different accounts. This system is compatible with all
releases >= 6.4.0, so don't run older releases simultanous to this one.
This mostly reverts commit 0d95651417,
disabling the old global lock system that we had in parallel to the new one.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
The logging rework led to multipline output as we stopped urlencoding
the output lines. Urrg. Fixed this, so output is urlencoded again.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
These were needed for python <2.6 compatability, but since we depend on
python 2.6 now, these can go.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
This is a CRITICAL bug fix release for everyone who is on the 6.4.x
series. Please upgrade to avoid potential data loss! The version has
been bumped to 6.5.0, please let everyone know to stay away from 6.5.x!
I am sorry for this.
See details in the Changelog and even more gory details in commit
message for commit 8fc7227189.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
This change looks harmless, but it fixes a severe bugfix, potentially
leading to data loss! It fixes the "on n new uploads, it will redownload
n-1, n-2, n-3,... messages during the next syncs" condition, and this is
what happens:
If there are more than one Mails to upload to a server, we do that by
repeatedly invoking folder.IMAP.savemessage(). If the server supports
the UIDPLUS extension we query the resulting UID by doing a:
imapobj._get_untagged_response('APPENDUID', True)
and that is exactly the problem. The "True" part causes the reply to
remain in the "response stack" of the imaplib2 library. When we do
the same call on a subsequent message and the connection is still on the
same folder, we will get the same UID response back (imaplib2 only looks
for the first matching response and returns that). The only time we
clear the response stack, is when the IMAP connection SELECTS a
different folder.
This means that when we upload 10 messages, the IMAP server gives us
always the same UID (that of the first one) back. And trying to write
out 10 different messages with the same UID will confuse OfflineIMAP.
This is the reason why we saw the ongoing UPLOADING/DOWNLOADING behavior
that people reported. And this is the reason why we saw the
inconsistency in the UID mapping in the IMAP<->IMAP case.
I urge everyone to upgrade ASAP. Sorry for that, I don't know why the
problem only became prevalent in the recent few releases as this code
has been there for quite a while.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Rather than always parsing the filename, we only need to do so if the flags
have actually changed, otherwise we can keep the filename.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Previously, assigning a new UID to a mapped IMAP or Maildir repository
was done by loading the "local" item, saving it under a new UID and
deleting the old one. This involved lots of disk activity for nothing
more than an effective file rename in Maildirs, and lots of network
usage in the MappedUID cases.
We do this on every upload from a local to a remote item, so that can
potentially be quite expensive. This patch lets backends that support it
(Maildir, MappedUID) efficiently rename the file rather than having to
read the mail content, write it out as a new file and delete the old
file. This speeds up uploads from Maildir and the MappedUID server.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Various functions (such as change_message_uid) will want to construct
maildir filenames, so factor out the code into a helper.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Create a helper function that retrieves the UID, folder MD5, and Flags from
a message filename.
We need these items when we simply want to rename (=new UID) a Maildir
message file later. The new function can give us these components.
Rework, so we cache the calculation of the folder's md5 value once, it
never changes and we call it a lot.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
If someone had a custom :2,a flag, adding a new flag would lead to the
invalid maildir filename ...a:2,... due to regex deficiencies not coping
with this. Fix this so we alway produce valid maildir names.
Note that custom flags are still problematic: as the syncing to the
remote IMAP server will fail, the next sync will assume that they have
been removed from the remote IMAP side and they will be removed from the
local Maildir then. We will need to think about how to handle this. At
least, with this patch we won't lose standard flags and won't produce
invalid maildir names.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
The regex for catching Maildir message flags was
self.infosep + '.*2,([A-Z]+)' (infosep being ':').
The .* is bogus, as there is nothing between the : and the 2, per
maildir name specification, so remove that unneeded piece.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
When a new remote folder was detected, we tried to create the folder
locally on the Maildir and called repository.forgetfolders() to force a
new scanning of the Maildir. However, that implementation used the
inherited base function that did nothing. We simply needed to implement
forgetfolders() to set self.folder=None, so we would force a new read in
of the updated local folder structure.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
1) Rename the unintuitive repository.syncfoldersto() to
sync_folder_structure()
2) We were checking if the local repository is readonly and then turning
off any folder creation. But as we can create folders on a remote
repository too, we need to be more fine grained here. Just don't create
a folder on the repository that is marked readonly=True.
This still does not do away with the error message that one currently
gets on missing local folders.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
The quiet UI should only output errors, and the final "Finished account
X in 2 seconds" clearly is none, so the message debug level needed to be
reduced to INFO to suppress it in the quiet ui.
Fixes https://github.com/spaetz/offlineimap/issues/6
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Merge in the new logging mechanism, and provide an --info feature that
will help with debugging. There is still some unstableness, so there
will be another release soon, but this should be no worse than 6.4.2 at
least...
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Previously, we would simply bail out in an ugly way, potentially leaving
temporary files around etc, or while writing status files. Hand SIGINT
and SIGTERM as an event to the Account class, and make that bail out
cleanly at predefined points. Stopping on ctrl-c can take a few seconds
(it will e.g. finish to transfer the ongoing message), but it will shut
down cleanly.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
As reported in https://github.com/spaetz/offlineimap/pull/2, we would
fail when files are empty because file.read() would throw attribute
errors.
Fix this by removing the superfluous read() check and additionally log
some warning message.
Reported-by: Ralf Schmitt
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
When sep='/' in a Maildir, we were doing a os.path.join(dirname,'') on
the top level maildir, which results in a "dirname/", so all our maildir
folder names had slashes appended. Which is pretty much wrong, so this
fixes it by only using os.path.join when we actually have something to
append.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
We need the list of folders and the folder delimiter, but it was not
always retrieved early enough. E.g. when doing IMAP<->IMAP sync and the
local IMAP being readonly, we would bunk out with a mysterious error
message become repository.getsel() would still return None.
This commit fixes this error.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
imapserver.getdelim() was not used at all, so remove this function. The
folder delimiter is available via the repository.getsep() call.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
The folder delimiter is only initialized after a call to
acquireconnection(), so we must never call this function too
early. Include an assert() to make sure we get notified when we do.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Rather than keeping a separate queue of all logged lines in memory, we
rely on the curses window scrolling functionality to scroll lines. On
resizing the terminal this means, we'll clear the screen and start
filling it afresh, but that should be acceptable.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
1) Rework the sleep abort request to set the skipsleep configuration
setting that the sleep() code checks.
2) Only output 15 rather than 50 debug messages on abort...
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
The remote|local|statusrepo is an anttribute of each SyncableAccount()
anyway, so we don't need to pass it in, we can simply get it from the
Account().
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Rename some variables, simplify the hotkeys treatment. Refresh/exit
signals still don't work as of yet, but will come.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Resizing a Blinkenlights terminal doesn't crash anymore, and actually
seems to be changing the size, with this patch.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
We were still referring to s.gettf() in sleeping(self, ...) causing each
attempt to sleep to crash. Fix this, and the CursesAccountFrame.sleeping()
method. I am sure, there is still wrong and broken but we are getting there.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
This function can IMHO lead to possible deadlocks when waiting for the
connectionlock. Do add a comment to that regard, this will need to audit.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
The huge UI rework patch removed some obscure logic and special handling of
thread exit messages. It turns out that this was in fact still needed as a
specific exit message of the SyncRunner thread signified the threatmonitor
to quit.
We will want a nicer machinery for this in the future I guess, but fix the
eternal hang on exit by reintroducing a special exit message for the
SyncRunner thread, and return from the infinite monitor loop if SyncRunner
finishes.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
To make sure, the lock gets released even if we raise an exception between
acquire() and release()
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
All ExitNotifyThreads and InstanceLimitThreads are setDaemon(True) in their
constructor, so there is no need to do that again in the code.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
1) Differentiate error messages between imaplib.abort and imaplib.error
exceptions in the log.
2) Drop connections in the case of imapobj.error, it also might denote a
broken connection.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
During cleanup we often call releaseconnection in a finally: block. But
in cases of error, we might have dropped the connection earlier already
and set it to "None". In this case don't fail releaseconnection() but
make it a NOOP.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
The default parameter value was "None", and we were comparing that
directly to the imaplib2 value of is_readonly which is False or True, so
the comparison always returned "False".
Fix this by setting the default parameter to "False" and not
"None". Also convert all users of that function to use False/True.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
It is basically unused by now. Rework to be able to make use of it
later, no functional changes.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Logging was flawed as the output was e.g. heavily buffered and people
complained about missing log entries. Fix this by making use of the
standard logging facilities that offlineimap offers.
This is one big ugly patch that does many things. It fixes the
Blinkenlights backend to work again with the logging facilities.
Resize windows and hotkeys are still not handled absolut correctly, this
is left for future fixing. THe rest of the backends should be working fine.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
If folder creation failed, we would output the wrong repository and
folder name (copy'n paste error). Fix this so we actually output the
correct values.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Only import the lock, that we actually need. Also import the with statement
for use with python 2.5. We'll need it for sure in this file.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Drop a connection, if the NOOP to keep a connection open fails due to
broken connections.
Note that I believe this function is not working as intended. We grab
one random connection and send a NOOP. This is not enough to keep all
connections open, and if we invoke this function multiple times, we
might well always get the same connection to send a NOOP through.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
A repositories 'reference value is always prefixed to the full folder
path, so we should do so when creating a new one. The code had existed
but was commented out since 2003, I guess the "reference" option is not
too often used.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
If port is None, we would try to format an empty string with %d wich
fails. Fix it by using %s.
Reported-by: Iain Dalton <iain.dalton@gmail.com>
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
This outputs a handy summary of your server configuration and version
strings etc, which is useful for bug reporting.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Was getting too large, split into an parse_cmd_options and a sync()
function. Moving config and ui to self.config and self.ui to make them
available through the OfflineImap instance.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
It happens quick, and clutters the log. So we can usually skip this. We
will output a log entry when we actually create a new folder anyway.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
If we create a new folder we would previously not update our folder
list, which led to us skipping the synchronization of those new folders
during the initial run (subsequent runs would pick it up).
Invalidate the folder cache when we create a folder during folder
structure sync. Regetting the whole list from an IMAP server might be
slightly suboptimal from a performance point, but it is easy and will
lead to consistent results. Hopefully we will not have to create new
folders on each new run.
Reported-by: Daniel Shahaf <d.s@daniel.shahaf.name>
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Modify the UI:acct and acctdone functions to keep tab of the time
inbetween. Put self.ui.acct() and acctdone() at the right places in
accounts.py so that the timing happens at the right places.
While modifying that loop, flatten the nested try: try: except: finally:
constructs, we require python 2.5 now which copes with that.
At the end of each account sync you will now see something like:
*** Finished account 'test' in 0:05
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Thread names are used to determine the logging header in the TTY ui. A
recent change made them too terse (basically only changing the account
name and not the folder names). Unbreak.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Output (2 of 500) when logging message copying. This required moving of
self.ui.copyingmessage into a different function where we actually have
the information about the progress handy.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Rather than setting a global threadutil/profiledir variable, we make
set_profiledir a class function that sets the class variable profiledir.
While touching theprofiledir code, add warning to the user if the
profile directory existed before.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Registering a thread (associating it with a certain account name) would
fail if it was already registered. However, as we a) never unregister most
threads (bad) and b) single-threaded mode reuses threads, we failed when
syncing multiple accounts in single-threading mode.
This commit cleans up the functions to not make re-registering a thread
fatal (it could be legitimate, however it *should* not occur). Future
work needs to be done to unregister new threads at the appropriate places.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
When checking for the IMAP4.abort() exception, we need of course to
perform:
except imapobj.abort:
and not
except imapobj.abort():
Thanks to Johannes Stezenbach <js@sig21.net> for pointing to the glitch.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
apply() has been deprecated since Python 2.3, and won't be working in
python 3 anymore. Use the functional equivalent throughout.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Dave identified a case where our new dropped connection handling did
not work out correctly: we use the retry_left variable to signify
success (0=success if no exception occured).
However, we were decrementing the variable AFTER all the exception
checks, so if there was one due to a dropped connection, it
could well be that we 1) did not raise an exception (because we want to
retry), and 2) then DECREMENTED retry_left, which indicated "all is
well, no need to retry".
The code then continued to check() the append, which failed with the
above message (because we obtained a new connection which had not even
selected the current folder and we were still in mode AUTH). The fix is
of course, to fix our logic: Decrement retry_left first, THEN decide
whether to raise() (retry_left==0) or retry (retry_left>0) which would
then correctly attempt another loop. I am sorry for this newbie type of
logic error. The retry count loop was too hastily slipped in, it seems.
Reported-by: Dave Abrahams <dave@boostpro.com>
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
If APPEND raises abort(), the (typ, dat) variables will not be set, so
we should not be using it for the OfflineImapError Exception
string. Fixing and prettifying the string formatting a bit at the same
time.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
When syncfolder() fails, we output an error message containing the
foldername per the localfolder variable. However, the localfolder
variable is assigned inside our try: block and when the error occurs
there, we will have no localfolder variable to use for output. This
caused the errormsg to cause an Exception itself which unhelpfully
distracts from the root cause of the error.
Reconstruct the folder name in a bit more complex way, but in a way so
it is guaranteed to work (by relying on parameters passed in to the
function).
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
A report by Dave Abrahams showed that the dequote() function failed when
invoked with an empty string. This fixes the function to be more robust.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
nametrans rules can lead to different visiblename names for the
top-level directory, specifically both '.' and '' (the latter was
recently introduced). However, we need to be able to compare folder
names to see if we need to create a new directory or whether a directory
already exists, so we need to be able to compare a repositories
visiblename (=transposed via nametrans rule) with another folder.
To make the top-level directory comparison happen, we enforce a
top-level name of '', so that comparisons work.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Some Webservers (I am looking at you Gmail) send different capabilities
before and after login, so they can tailor their server capabilities to
the user. While legal, this is uncommon and we were not updating our
server capabilities. Doing so allows us to detect that Gmail actually
supports the UIDPLUS extension, and we will stop mangling headers when
uploading to Gmail. This could lead to some performance gains when we
upload many messages to Gmail.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Commit b0e88622c4 changed dst_hash[folder.visiblename] to
dst_hash[folder.name] but we did not adapt all places where it is needed
to use visiblename again. This led to attempting to create a name on
REMOTE ignoring the nametrans setting on the LOCAL repository.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Previously, we only checked if a LOCAL folder falls under the local
repositories folderfilter rule when deciding whether a folder should be
created on REMOTE.
However, we also do not want to create the folder on REMOTE if it would
fall under a folderfilter rule there. This patch prevents us from doing
so.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
It is not easy to think through when to use visiblenames() and whatnot. It seems I managed to not think it through properly. Which might be fixed now.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
The thread ID is not really useful and looks ugly. It also makes lines
longer than needed, there is more useful information we can put in the
log. So do away with it.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
This will ignore any nametrans rules, so we might want to limit this
only to cases where no nametrans has been specified, or we might want to
use the nametrans setting of the dest repo.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
getvisiblename() was only defined on IMAP(derived) foldertypes, but we
want it on eg. Maildirs too, so we define it centrally in Folder.Base.py
rather than only in folder.IMAP.py.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Currently we only filtered IMAP repositories, this patch enables filtering
for Maildir repositories too.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
We want to have these functions available for Maildir folders too, so we
can folderfilter a Maildir repository too (which is currently not possible)
This commit only move the corresponding functions from the IMAP to the Base
implementation. It should not change behavior in any way yet.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Also remove the removed parameters in the Gmail folder
initialization. This is one spot where I had forgotten to also strip the
parameters.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
If nametrans translates to an empty directory we want to find the
top-level directory by name '' and not by name '.'. This unbreaks
nametrans rules that result in empty folder names.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Previously, getfolder() would always construct new MaildirFolder()
objects, independent of whether the folder exists or not. Improve the
function to:
1) Scan and cache the folders if not already done
2) Return the same cached object if we ask for the same foldername twice
3) Reduce a tiny bit of code duplication
This is important because we handle stuff like folderfilter in the
scandir function and if we discard the scanned dir and create a new
object on folderget(), we will lose the folderfilter information.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Output a debug log line whenever we create a new folder on an IMAP
server. Also raise an OfflineImap Error in case we failed to create it.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
This variable shows if this folder should be synced or is disabled due to
a folderfilter statement. This lets us distinguish between a non-existent
folder and one that has been filtered out. Previously any filtered folder
would simply appear to be non-existing.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
The Message UID is already the key to self.messagelist, so we have that
information. It is redundant to save the UID again as
self.messagelist[uid]{'uid': uid} and we never made use of the
information anyway.
The same thing should be done with the other 2 backends.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
A more pythonic and less verbose way to do the same. Add a comment what the
variable is all about.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Warn the user and abort when we attempt a plaintext login, but the
server has explicitly disabled plaintext logins.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Use the ui.error infrastructure that has been put in place and use
ui.terminate even if we received an Exception, so that we can output the
list of errors that we have. This does away with 2 now unused functions
in ui/UIBase.py
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
We simply lock OfflineImap the same global way that we have always done
in addition to the previously implemented per-account lock. We can keep
both systems in parallel and then after a few stable releases, drop the
old-style global lock. by reverting this patch
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
The next commit will make use of OfflineImapError but is transient (the
old-style lock). The commit is supposed to be reverted after a few
releases. So add the new import in a separate commit, because we might
need this even when reverting the commit.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Previously, we were simply locking offlineimap whenever it was
running. Howver there is no reason why we shouldn't be able to invoke it
in parallel, e.g. to synchronize several accounts in one offlineimap
each.
This patch implements the locking per-account, so that it is possible to
sync different accounts at the same time. If in refresh mode, we will
attempt to loop three times before giving up.
This also fixes Debian bug #586655
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
open() and os.open() lead to different file permissions by default, and
while we have not changed the os.open that had been used, some code
changes led to these permissions slipping through. Fix this by setting
the permissions explicitly to 0666 (minus the users umask).
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
repos.getuesr() asks for a username if none is specified, but in the
case of a tunnel connection, we don't need one, so we need to skip the
repos.getuser() call here.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
IMAPFolder has the repository and foldername values so it can get the
transposed (aka visiblename) of a folder itself just fine. There is no
need to pass it in as an separate parameter.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
They have the Repository() which contains the root, so no need to pass
it in as an extra parameter. Rename repository.LocalStatus()'s
self.directory to self.root for consistency with other backends.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
It is possible to get the config parameter from the Repository() which is
set in BaseFolder, so we set self.config there and remove the various
methods and 'config' parameters that are superfluous.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
We passed in the accountname to all derivatives of BaseFolder, such as
IMAPFolder(...,repository,...,accountname), although it is perfectly
possible to get the accountname from the Repository(). So remove this
unneeded parameter. Each backend had to define getaccountname() (although
the function is hardly used and most accessed .accountname directly).
On the other hand BaseFolder was using getaccountname but it never defined
the function. So make the sane thing, remove all definitions from backends
and define accountname() once in Basefolder. It was made a property and not
just a (public) attribute, so it will show up in our developer
documentation as public API.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
As all Folders share these parameters, we can safely handle them in
BaseFolder. This makes sense, as BaseFolder has a getname() function
that returns self.name but nothing actually set self.name.
It also saves a few lines of code.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
In getmessage() we were releaseing a connection when we detected a
dropped connection, but it turns out that this was not enough, we need
to explicitely discard it when we detect a dropped one. So add the
drop_conn=True parameter that was recently introduced to force the
discarding of the dead conection.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
The quickchanged() function was not handling dropped connections yet. If
IMAP4.select() throws a FOLDER_RETRY error, we will now discard the
connection, reconnect and retry.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
Beauty of code is probably a subjective measure, but this patch hopefully
is an improvement over the previous incarnation without changing
functionality.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
repository.BaseRepository().restore_atime() was testing in complex ways
that it only operates on a Maildir and that the 'restoreatime' setting
is set. This is unecessary, we can simply make the base implementation a
NoOp, and move the implementation to MaildirRepository().
This will save a tad of work for everyone doing IMAP<->IMAP
synchronization and simplify the code. Also document the functions.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
We only explicitly tested for 'yes' when we have a nice function to get
boolean settings which also works with Treu/False/NO, etc...
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
The readonly feature was introduced to safeguard repositories from
accidental modifications. Unfortunately, my patch treated the readonly
setting as a string and not as a boolean, so if *anything* was set in
the configuration file as 'readonly', this value evaluated to True
Fortunately this was safe, we never treated a repository that we wanted
read-only as read-write. We always treated them readonly if something
was configured as "readonly=..." even if that was False.
The fix is simply to use getconfboolean() rather than getconf() which
checks for True/False/On/Off/yes/no/1/0 and hands back the correct boolean.
Reported-by: Tomasz Nowak <nowak2000@poczta.onet.pl>
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
We rely on the number of mails being returned by the imapobj.select()
call, however that only happens if we "force" a real select() to occur.
Pass in the force parameter that I dropped earlier (we did not make use
of the return value when I dropped it, that is how it slipped through).
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
We were retrying indefinitely on imapobj.abort() (as that is what
imaplib2 suggests), but if the failure occurs repeatedly, we'll never
quit this loop. So implement a counter that errs out after unsuccessful
retries.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
Finally, actually discard dropped connections when we detect them as an
imapobj.abort() has been thrown. In this case, invoke releaseconnection
with drop_conn=True.
We don't need the self.aborted attribute to get signified of dropped
connections. An Execption during the noop will do.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
while True: if a: return
is equivalent to
while not a:
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
Variable name 'event' is as bad as it gets. Rename it to something that
actually describes what it is about.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
Add code documentation throughout the idle() function.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
Don't redefine the idle callback function on every run in the while
loop, define it once when we enter the function.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
Python 2.5 has no ssl module, and we can therefor not get the server
certificate for fingerprint verification. Add a check that disables
fingerprint verification for python 2.5.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
imaplib2 has changed internally to use self.sock for its ssl socket when
it used to be sslobj. Reflect that change.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
If we connect to a SSL server (not STARTTLS) and no CA cert has been
specified for verification, we check the configured SSL fingerprint and
bail out in case it has not been set yet, or it does not match.
This means one more mandatory option for SSL configuration, but it
improves security a lot.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
If maxage is set too large, we would even SEARCH for negative
years. With devastating results. So implement some sanity check and err
out in case the year does not make sense.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
We can use Imaplib's monthnames and shorten the construction of the date
by using them rather than hardcoding them again.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
Results are delivered in a 1-element list, and somehow I managed to drop
a [0] in the previous patches. We need to look at the element of course,
or our string splitting will fail horribly. Sorry this somehow slipped
through.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
If a folder is empty, most servers will return EXISTS 0 and imaplib2
passes back ['0'] as return value to a select(). It returns [None] if
no EXISTS response was given by the server at all.
Attempting to fetch the UIDs of 0 emails which leads to
various error messages (One server responds with "NO No matching
messages", Gmail seems to say "BAD Bad message sequence 1:*" for some
(although it is working fine for me with Gmail, so it might behave
different for different people).
In case we get an None or 0 back, we simply stop caching messages as the
folder is empty. This should fix the various error reports that have
popped up.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
Make sure that when a connection is dropped during append, we really
discard the broken connection and get a new one, retrying. We retry
indefinitely on the specific abort() Exception, as this is what imaplib2
suggests us to do.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
If a connection is broken, we want to have it really dropped and not be
reused. So far, we are checking the .Terminate attribute for this, but
according to the imaplib2 author, it is only set on normal shutdown and
it is an undocumented attribute whose meaning could change any time.
This patch introduces the parameter drop_conn which allows to tell
releaseconnection() that we really want to connection being dropped from
the pool of available connections and properly destroy it.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
Rather than output the full list of messages, coalesce it into number
ranges wherever possible.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
This function was badly named and completely undocumented. Rework it to
avoid copying the full UID list using an iterator. Make it possible to
hand it a list of UIDs as strings rather than implicitely relying on the
fact that they are numeric already. Document the code.
The behavior off the function itself remained otherwise unchanged.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
SEARCH and FETCH were never checking that the IMAP server actually
returned OK. Throw OfflineImapErrors at severity FOLDER in case one of
them fails.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
Some code cleanup. If we want to examine all messages of a folder, don't
try to find out how many there are and request a long list of all of them,
but simply request 1:*. This obliviates us from the need to force a select
even if we already had the folder selected and it requires us to send a
few less bytes over the wire.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
Do away with the wrapping of this code in a try...except KeyError, as
this code cannot conceivably throw a KeyError. Even if it could, it
should be documented why we should simply return() in this case.
Shorten some of the variable names and minor code cleanup while taking
the git blame anyway.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
Rather than passing in huge lists of continuous numbers which eventually
overflow the maximum command line length, we coalesce number ranges
before passing the UID sequence to SEARCH. This should do away with the
error that has been reported with busy mailing lists and 'maxage'.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
It is not needed. list(ALIST) will create a new copy of the list just
fine.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
Make sure that when a connection is dropped during append, we really
discard the broken connection and get a new one, retrying. We retry
indefinitely on the specific abort() Exception, as this is what imaplib2
suggests us to do.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
If a connection is broken, we want to have it really dropped and not be
reused. So far, we are checking the .Terminate attribute for this, but
according to the imaplib2 author, it is only set on normal shutdown and
it is an undocumented attribute whose meaning could change any time.
This patch introduces the parameter drop_conn which allows to tell
releaseconnection() that we really want to connection being dropped from
the pool of available connections and properly destroy it.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
When invoked with FETCH 1:* (UID), imaplib returns [None] for empty
folders. We need to protect against this case and simply 'continue' here.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
If a connection is dropped for some reason while fetching a message, the
imapobj.uid command throws an imapbj.abort() Exception which means we are
supposed to retry. Implement a fail loop that drops the connection, gets a
new one and attempts the command another time.
Remove obsolete comment that we need to catch nonexisting messages. We do
now.
GMail seems to drop connections left and right. This patch is a response to
the reported mail "4E5F8D8C.1020005@gmail.com" by zeek
<ezekiel.das@gmail.com>.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
Handle the case gracefully where a server has closed an IMAP connection
that we want to use for IDLEing. Simply have it dropped and get a new one
in this case. THis should get rid of the errors reported by John Wiegley
in mail id:"m2sjohd16t.fsf@gmail.com".
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
Imapserver.acquireconnection will succeed even whent the server connection
has been terminated and the first IMAP operation will throw an exception.
Often this is the folder SELECT operation (e.g. after an idle timeout), as
has been reported by John Wiegley. Catch this case and throw an
OfflineImapError with severity FOLDER_RETRY to notify consumers that they
are supposed to retry.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
In cases where processing a folder failed, but a retry might well succeed
e.g. when the server connection had simply timed out and was disconnected,
we can throw a FOLDER_RETRY (which is less severe than FOLDER).
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
Name parameter that hands us a Status Repository 'status_repo' and not
'copyfolders' as was before:
a) make it clear that we pass in a repository and not folder
instances. That was very confusing before.
b) We were always only using one 'copyfolders' item anyway, so let us
not make it a list.
Go through the list and make the variable nameing consistent:
dst_repo rather than dest (is it a folder?) to match the status_repo
naming scheme.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
To preserve previous behavior and save a few CPU cycles, we were not sorting UID
lists and only collapsed them if they were alreay sorted. Vincent pointed out
that this is not always the case and unsorted lists lead to non-optimally
collapsing.
Force lists to numeric types and sort them before collapsing.
Reported-by: Beffara <vbeffara@ens-lyon.fr>
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
We were using self.getfolderbasename(self.name) but the API is simply
getfolderbasename(). Fix this glitch.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
SafeConfigParser is very similar to the currently used ConfigParser but
it supports interpolation. This means values can contain format strings
which refer to other values in the same section, or values in a special
DEFAULT section. For example:
[My Section]
foodir: %(dir)s/whatever
dir=frob
would resolve the %(dir)s to the value of dir (frob in this case). All reference expansions are done on demand.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
as that method doesn't exist on sets. Rather call the inbuilt
sorted(flags). This fixes Exceptions being thrown when using the sqlite
backend.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
We were omitting an '%' where we needed it. Also include the traceback
information where it belongs in the new ui.error infrastructure.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
443 is of course the https and not the IMAPS standard port. Fix.
Thanks to Daniel Shahaf <d.s@daniel.shahaf.name> for the heads up.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
Commit e023f190b0 changed the storing of
file paths in the messagelist variable to be relative paths, but we were
using the full absolute path anyway as we missed one spot.
Adapt this and construct the full file path in the one place where we
need it.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
Rather than output the full list of messages, coalesce it into number
ranges wherever possible.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
This function was badly named and completely undocumented. Rework it to
avoid copying the full UID list using an iterator. Make it possible to
hand it a list of UIDs as strings rather than implicitely relying on the
fact that they are numeric already. Document the code.
The behavior off the function itself remained otherwise unchanged.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
As this is essentially what it is, a set of values. This allows as
to do set arithmetics to see, e.g. the intersection of 2 flag sets
rather than clunkily having to do:
for flag in newflags:
if flag not in oldflags:
oldflags.append(flag)
Also some more code documenting.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
Empty foldernames (as they could be created through nametrans) were
failing as the uidvalidity and status files names as determined by
folder/Base.py:getfolderbasename() lead to invalid file names ''.
Fix this by handling empty file names and translating them to '.' which
leads to the special file name 'dot'. (this special value existed before
and was not invented by this patch)
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
I changed the API to pass in a folder rather than a list of folders, but
used getnicename() on the wrong object. It is not used on the folder but
on the ui object. Fix this and give the variable somewhat better names.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
It works by fetching all headers of new messages from IMAP server and
searching for our X-OfflineIMAP marker by using regular expression.
Signed-off-by: Vladimir Marek <vlmarek@volny.cz>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
We only copy to a single folder anyway, so clean up the code to only
pass in a single folder.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
imaplib2 always attempts to verify a certificate if a verification
callback function is passed in, even the certificate is None
specified. Disable the verification excplictly by setting the
verification function to None in that case.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
we need errno.CONNREFUSED, but through some merging mishaps(?) the part
that actually imported errno was missing. Import the errno module.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
imaplib renamed self.sslobj to self.sock and our overriden open()
functions were failing for that reason when updating imaplib2 to
v2.28. It turns out that all of our custom initializations are being
done by stock imaplib2 now anyway, so there is no need to override them
anymore. This lets us simplify the code we have to worry about.
Move the verifycert() function to the imapserver.py file, it is now a
callback function that is being handed to imaplib from there, so it
makes sense to also define it in our imapserver function...
(this also lets us easily make use of the verifycert function in the
starttls case in the future)
TODO: we need to examine if and why we still need to override the
select() function, it is the only reason why we still wrap the IMAP4
classes.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
Imaplib2 2.28 can deal with ID sequences, such as 1:*, so we need to
bump upstream in order to make use of these features.
Note that this revision will not run correctly as it requires
adaptations to our code, which happens in the next commit.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
We were not including the full server reply into our error message. Fix
that so we get better error logs.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
This is a bug fix on several levels. 1) We were lacking the import of
OfflineImapError. 2) OfflineImap.ERROR.MESSAGE was misspelled as ERROR.Message.
3) COntinuing with the next message only worked in single-thread mode
(using debug) and not in multi-thread mode. The reason is that we were
invoking a new thread and catching Exceptions in the main thread. But
python immediately aborts if an Exception bubbles up to a thread start.
This was fixed by catching exceptions directly in copymessageto() which
is the new thread, rather than catching them in the main thread.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
Allowing to specify the char to use in the BLinkenlights is a bit over
the top and bloats our default offlineimap.conf. The dot is just fine,
so let us settle for it and cut the example config file by an unneeded
section.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
append() raises an Exception, in case the IMAP server replies with 'BAD'
(but not when it responds with 'NO') but we were not catching that. Do
catch the situation and also raise an OfflineImapError at MESSAGE
severity, so that we can continue with the next message.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
sys.exc_traceback is long deprecated and is seems removed in python2.7,
so document the legitimate use of sys.exc_info()[2] instead.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
We set an imapobj.mustquote which apparently was used in previous
incarnations of imaplib or imaplib2, however, nothing in our codebase
makes use of that. So let us remove it.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
This function was overridden as the IMAP version apparently had been
using imapobj.myrights() at some point in time, which was not
implemented in the Gmail version. However, IMAP is not using myrights()
anymore, and as that is an extension that needs to be advertised in
CAPABILITIES we should not unconditionally use it anyway.
So remove the function that is identical to it's ancestor's
function.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
This code was unused and broken. It is still unused but this commit
fixes it. (We should retain the method in case we ever start calling
getfolders() on LocalStatus.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
Rather than throwing ValueError, we now properly throw OfflineImapError
when selecting a folder in folderincludes. So we also need to catch
OfflineImapErrors here. If they are of severity FOLDER, just ignore the
invalid folder and continue. If the error is more severe, bubble it up.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
Remove a level of wrapper abstraction that is not needed. Just use
IMAPserver and be done with it.
We do this by passing in the IMAPRepository() instance rather than a
long list of single paramters to the IMAPServer instanciation. This way
we can retrieve all repository parameters ourselves, rather than passing
a dozen paramters into IMAPServer. Also, this enables us to pass the
repository() object into our WrappedIMAP4() instance, so that it can
query, e.g. the SSL fingerprint configuration.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
We simply assert()ed that APPENDing a message returned OK, but in some
cases (e.g. Google chat messages) APPEND might return BAD or NO too. We
should be throwing an OfflineImapError here at MESSAGE level, so that we
can continue to sync all other messages, and still give the user some
details on what went wrong at the end of the sync run.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
Rather than using ui.warn, use ui.error() which outputs Exceptions to
the error log, saving them to a stack, so we get notified again at the
end of the sync run.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
Output all raised Exceptions error strings to the error log. If we are
in debug mode, we also output the traceback of the exception.
Save all exceptions that occur during the run time to a Queue and output
them all again when the offlineimap sync is finished.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
Message was stored to dstfolder, but we can't find it's UID. This means we can't
link current message to the one created in IMAP. So we just delete local message
and on next run we'll sync it back. Also fixed imap.savemessage description.
This was broken by e20d8b9679.
Signed-off-by: Vladimir Marek <vlmarek@volny.cz>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
It's not enough to place header after first newline, since this might break
multiline rfc0822 folded long header lines. Those are difined as CRLF followed
by white space. Instead we'll search for two successive CRLF sequences which
mark end of mail headers and place our header just before that.
Signed-off-by: Vladimir Marek <vlmarek@volny.cz>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
That makes OfflineIMAP to use exclamation mark (!) instead of colon for storing
messages. Such files can be written to windows partitions. But you will probably
loose compatibility with other programs trying to read the same Maildir.
Signed-off-by: Vladimir Marek <vladimir.marek@oracle.com>
Reviewed-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
getselectedfolder was using a cached variable that we were setting in
select(), but sometimes the IMAP4 instance got into the SELECTED state
without explicitely select()ing, it seems, and our variable was unset.
Let us just use the self.mailbox variable that imaplib2 is setting when
select()ing rather than doing our own caching. Also remove the part
where we were setting the cache.
Just access self.state rather than looking up self.state via
self.getstate() every time, it is just an unnecessary layer of
redirection.
Original-patch-by: Arnaud Fontaine <arnau@debian.org>
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
In commit 89cbdc9, usage of SSLError was dropped but later reintroduced
without importing SSLError exception.
Signed-off-by: Arnaud Fontaine <arnau@debian.org>
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
Rather than the extremly verbose NO WARRANTY blurb, we output a somewhat
smaller initial text which should still make the GPL happy.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
The traceback module has format_exc() for this purpose so let's use that.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
We we using the variable 'severity' in a few places to throw
OfflineImapErrorrs of severity REPO. Somehow, that variable is now not
accessible in all places that refer to it, so we move where it is
defined to before all the 'if' checks which might make use of it.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
If we do not use a SSL connection anyway and if the server supports it,
authenticate automatically with STARTTLS.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
In an IMAP run where we did not have to sync anything, I spend nearly a
fulls second in imaputil.debug() without even having debug output
enabled. imapsplit is mainly called by flagsplit() which will also do
debug output, so we get TONS of nearly duplicate debug output in the log
which makes it really hard to analyze.
Cut down the debug logging in imapsplit, we should be debug logging
stuff at a slightly higher level than here anyway.
This one-line change sped up my folder sync (without having to sync
anything) by 0.5 seconds even when debugging is disabled.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
Previously, we instanciated an MappedImapFolder, and would cleverly (too
cleverly?) invoke methods on it casting it to an IMAPFolder by calling
methods such as: self._mb.cachemessages(self) where self._MB is the class
IMAPFolder and self and instance of MappedImapFolder. If
e.g. cachemessages() invokes a method uidexists() which exists for
MappedImapFolder, but not directly in IMAPFolder, I am not sure if
Python would at some point attempt to use the method of the wrong class.
Also, this leads to some twisted thinking as our class would in same
cases act as an IMAPFolder and in some cases as an MappedImapFOlder and
it is not always clear if we mean REMOTE UID or LOCAL UID.
This commit simplifies the class, by a)doing away with the complex Mixin
construct and directly inheriting from IMAPFOlder (so we get all the
IMAPFOlder methods that we can inherit). We instantiate self._mb as a
new instance of IMAPFolder which represents the local IMAP using local
UIDs, separating the MappedIMAPFolder construct logically from the
IMAPFolder somewhat.
In the long run, I would like to remove self._mb completely and simply
override any method that needs overriding, but let us take small and
understandable baby steps here.
Reported-and-tested-by: Vincent Beffara <vbeffara@gmail.com>
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
sudir->subdir in a debug statement. Thanks ccxCZ on IRC for the heads
up.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
During a sync run, someone might remove or move IMAP messages. As we
only cache the list of UIDs in the beginning, we might be requesting
UIDs that don't exist anymore. Protect folder.IMAP.getmessage() against
the response that we get when we ask for unknown UIDs.
Also, if the server responds with anything else than "OK", (eg. Gmail
seems to be saying frequently ['NO', 'Dave I can't let you do that now']
:-) so we should also be throwing OfflineImapErrors here rather than
AssertionErrors.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
I discovered that we do not run ui.terminate in all circumstances, so
make sure that we call with properly at the end of each run (whether in
threaded or single-thread mode).
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
Commit 1754bf4110 introduced a blunder:
- for dirname in os.listdir(toppath) + ['.']:
+ for dirname in os.listdir(toppath) + [toppath]:
...
- if self.getsep() == '/' and dirname != '.':
+ if self.getsep() == '/' and dirname:
This change was plainly wrong and would never have worked, so this
commit reverts above bit. While touching the function, some minor code
documentation, cleanup and limiting line length to 80 chars.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
Folder.savemessage() is supposed to return the new UID that a backend
assigned, and it BaseFolder.copymessageto() fails if we don't return a
non-negative number in the savemessage() there.
For some reason, the UIDMappedFolder was not returning anything in
savemessage, despite clearly stating in the code docs that it is
supposed to return a UID. Not sure how long this has already been the
case. This patch fixes the UIDMappedFolder to behave as it should.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
During a sync run, someone might remove or move IMAP messages. As we
only cache the list of UIDs in the beginning, we might be requesting
UIDs that don't exist anymore. Protect folder.IMAP.getmessage() against
the response that we get when we ask for unknown UIDs.
Also, if the server responds with anything else than "OK", (eg. Gmail
seems to be saying frequently ['NO', 'Dave I can't let you do that now']
:-) so we should also be throwing OfflineImapErrors here rather than
AssertionErrors.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
Fix a gssapi issue where threads beyond the first would not
be able to authenticate against the imap server. This is
done by using the connection lock around the gssapi
authentication code and resetting (and releasing) the
kerberos state after success so that subsequent connections
may make use of kerberos.
Signed-off-by: Scott Henson <sjh@foolishpride.org>
Reviewed-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
We currently don't care about expiration dates of the servers SSL
certificate. This patch adds a check that fails Cert verification when
it is past its due date. There is no way or option to override this
check.
Unfortunately we only seem to be able to get SSL certificate data when
we passed in a CA cert file? How do we get that date when we don't have
a ca cert file?
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
Previously we were attempting to save out mails according to
http://www.qmail.org/man/man5/maildir.html in 4 steps:
1 Create a unique filename
2 Do stat(tmp/<filename>). If it found a file, wait 2 sec and go back to 1.
3 Create and write the message to the tmp/<filename>.
4 Link from tmp/* to new/*
(we did step 2 up to 15 times) But as stated by
http://wiki1.dovecot.org/MailboxFormat/Maildir (see section 'Issues with
the specification'), this is a pointless approach, e.g. there are race
issues between stating that the filename does not exist and the actual
moving (when it might exist).
So, we can simplify the steps as suggested in the dovecot wiki and
tighten up our safety at the same time.
One improvement that we do is to open the file, guaranteeing that it did
not exist before in an atomic manner, thus our simplified approach is
really more secure than what we had before.
Also, we throw an OfflineImapError at MESSAGE level when the supposedly
unique filename already exists, so that we can skip this message and
still continue with other messages.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
MaildirFolder.messagelist[*]['filename'] was storing the absolute file
paths for all stored emails. While this is convenient, it wastes much
space, as the folder prefix is always the same and it is known to the
MaildirFolder. Just 40 chars in a folder with 100k mails waste >4MB of
space. Adapt the few locations where we need the full path to construct
it dynamically.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
We use getfullname() very often (thousands to millions), yet we
dynamically calculate the very same value over and over. Optimize this
by caching the value once and be done with it.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
In some cases we had offlineimap trying to delete emails that shouldn't
be deleted. E.g. https://bugzilla.redhat.com/show_bug.cgi?id=708898.
It turns out that imaplib2 does not like FETCH responses that are
interrupted by other unsolicited server responses, e.g.
* OK Searched 43% of the mailbox, ETA 0:12\r\n
Bump imaplib2 to a version that can cope with these (legal) responses by
the IMAP server.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
we do:
for msgid in imapdata:
maxmsgid = max(long(msgid), maxmsgid)
and then basically immediately:
maxmsgid = long(imapdata[0])
throwing away the first assignment although the first method of
assigning is the correct one. The second had been forgotten to be
removed when we introduced the above iteration. This bug would fix a
regression with those broken ZIMBRA servers that send multiple EXISTS
replies.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
All months names are 3-letter abbreviated, but accidentally June and
July slipped through. Thanks to the heads up by
Philipp Kern <pkern@debian.org>.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
Previously we hard-coded the imap server name in the case of Gmail
repositories, but often we need a different host name. So, allow people
to specify the hostname via the regular "remotehosteval" and
"remotehost" settings, and only falling back to imap.gmail.com when
nothing has been specified.
Cache the hostname, so we don't evaluate the whole thing each time we
query the host name.
Make the remotehosteval processing more robust, by catching any
Exceptions that occur, and throw a OfflineImapError, that explains where
exactly the error had occured. You can test this, e.g. by setting
remotehosteval to 1/"n" or some other invalid expression.
The whole IMAP.gethost() function has been documented code wise while
going through.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
We currently do not allow nametrans rules such as
nametrans = lambda foldername: re.sub('^INBOX$', '', foldername)
because we crash with a traceback when running:
http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=499755
The underlying reason is that we cannot create the "top level" root
directory of the Maildir in the function makefolders(), it will bail
out. John Goerzen intentionally prevented offlineimap from creating the
top-level dir, so that a misconfiguration could not arbitrarily create
folders on the file system. I believe that it should be perfectly
possible to automatically create the root dirctory of the maildir. We
still protect against folder creations at arbitrary places in the file
system though.
This patch cleans up makefolders(), adds documentation, allows to
automatically create rootfolders if needed (using absolute paths) and
adds some robustness in case the folders already exist that we want to
create (rather than simply crapping out).
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=499755 shows the
cryptic output we have when, e.g. trying to put somethin in our mailDir
root via the nametrans options. This commit adds at least some hint as
to what went wrong using an "assert" message, although the correct thing
is to allow the creation of a maildir in the root folder.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
We were "crashing" with tracebacks when we could not connect to a host,
(e.g. because no service was on the port) and we were getting mysterious
SSL tracebacks when someone tried to connect via SSL to a non-ssl port.
In these cases, we will now throw an nice error message. On python<2.6
where no ssl module exists, we simply won't throw those errors.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
commit 0318c6a [Create LocalStatus or LocalStatusSQLite folders] changes import
of LocalStatus but doesn't preserve magicline.
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
Raise OfflineImapError with severity REPO explaining that the connection failed.
Before, no valuable information was given to the user.
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
Without this patch, we try to NOOP on a bad connection and crash messily.
Signed-off-by: Tom Lawton <tlawton@gmx.de>
Signed-off-by: Ethan Glasser-Camp <ethan@betacantrips.com>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
This commit was originally by James Bunton <jamesbunton@fastmail.fm>.
Signed-off-by: Ethan Glasser-Camp <ethan@betacantrips.com>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
If the server doesn't support IDLE, we fall back to the standard
noop() keepalive.
This commit was originally by James Bunton <jamesbunton@fastmail.fm>.
Signed-off-by: Ethan Glasser-Camp <ethan@betacantrips.com>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
This is the commit that enables IDLE support. In order to do this, we
hijack the keepalive method. Instead of just sending NOOPs, it now
sends IDLE and responds accordingly, thanks to the IdleThread class.
This code was originally by James Bunton <jamesbunton@fastmail.fm>.
Signed-off-by: Ethan Glasser-Camp <ethan@betacantrips.com>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
This encapsulates the logic for sending a keepalive/IDLE call,
including starting a sync if needed.
This code was originally by James Bunton <jamesbunton@fastmail.fm>. I
modified the idle() method to put the select() call after
acquireconnection().
Signed-off-by: Ethan Glasser-Camp <ethan@betacantrips.com>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
Mark this option as experimental and document its shortcomings in
MANUAL.rst.
This code was originally by James Bunton <jamesbunton@fastmail.fm>.
Signed-off-by: Ethan Glasser-Camp <ethan@betacantrips.com>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
This is a regression introduced by commit d5493fe894
[threadutil: explicitly import get_ident from thread].
The threadid attribute was wrongly removed from the ExitNotifyThread class.
Restore it.
Tested-by: Mark Foxwell <fastfret79@archlinux.org.uk>
Reviewed-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
We are missing the import of 'os' python module since commit d839be3c61
(Sat Apr 16 20:33:35 2005 +0100) which was when John switched from SVN to Git.
Happily, it help us today: we still had no feedback for this missing import,
6 years later. So, we can remove the os.exit() call safely.
That beeing said, we still don't know if the above sys.exit() was ever touched.
My guess is that it never was. Keep this (hopefully) commented statement to
ensure the thread terminate and not play too much with the Murphy's law. :-)
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
The semaphorewait()/waitforthread() logic is usefull for IMAP starting
connections. We actually use it in imapserver only.
This patch removes the over-engineered factorized methods. It tend to simplify
the code by cleaning out a chain of two direct calls with no other processes.
Reviewed-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
The python module thread is the low-level module we should avoid to use in favor
of threading. We still need it to support old python because Thread.ident
doesn't exist before python 2.6:
http://docs.python.org/library/threading.html#threading.Thread.ident
Make it clear we should avoid it.
Reviewed-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
- conform to PEP8
- explicitly define symbols instead of 'import *'
- remove unused import
Reviewed-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
We were outputting full message bodies to the debug log (often stderr),
and then again (as they go over the imaplib2 wire, imaplib logs
everything too). Not only is quite a privacy issue when sending in debug
logs but it can also freeze a console for quite some time. Plus it
bloats debug logs A LOT.
Only output the first and last 100 bytes of each message body to the
debug log (we still get the full body from imaplib2 logging). This
limits privacy issues when handing the log to someone else, but usually
still contains all the interesting bits that we want to see in a log.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
The syntax was not right, and deleting messages from the LocalStatus
failed. (We passed in the full list of uids and we need to pass in one
uid at a time (as a tuple). Deleting messages works now.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
The SigListener class was used to queue folders that we need to sync and
to receive "resync" and "abort" signals. It was undocumented and weird
and we had to pass "siglisteners" through the whole program.
Simply do away with it, and make 2 functions in the Account() class:
set_abort_event and get_abort_event which can be used to set and check
for such signals. This way we do not need to pass siglisteners all over
the place. Tested Blinkenlights and TTYUI uis to make sure that SIGUSR1
and SIGUSR2 actually still work.
Document those signals in MANUAL.rst. They were completly undocumented.
This simplifies the code and interdependencies by passing less stuff
around. Removes an undocumented and weirdly named class.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
Throw an OfflineImapError when SELECTing a folder is unsuccessful and
bail out with a FOLDER serverity. In accounts.py catch all
OfflineImapErrors and either just log the error and skip the folder or
bubble it up if it's severe.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
Use two %s in the message for both string parameters.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
Make the folder classes use uidexists() more. Add some code
documentation while going through.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
Depending on the configuration we use the plain text or the new
experimental sqlite backend for the LocalStatus cache. Make plain text
the default status backend but allow people to configure
status_backend=sqlite in their [Account ...] section.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
Test if sqlite is multithreading-safe and bail out if not. sqlite
versions since at least 2008 are.
But, as it still causes errors when 2
threads try to write to the same connection simultanously (We get a
"cannot start transaction within a transaction" error), we protect
writes with a per class, ie per-connection lock. Factor out the retrying
to write when the database is locked.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
Make getfolders() invoke getfolder() for each folder rather than
duplicating code. Also add a forgetfolders() implementation.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
doautosave was a useless variable before (it was *always* 1). So we
remove the self.dofsync variable and store in doautosave whether we
should fsync as often as possible (which really hurts performance).
The sqlite backend could (at one point) use the doautosave variable to
determine if it should autocommit after each modification.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
Python's new style classes derive from object and str(class().__class__)
will return a slightly different format. class().__class.__name__ will
still work for both old and new style classes, so use that instead.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
Based on patches by Stewart Smith, updated by Rob Browning.
plus:
- Inherit LocalStatusSQLFolder from LocalStatusFolder
This lets us remove all functions that are available via our ancestors
classes and are not needed.
- Don't fail if pysql import fails. Fail rather at runtime when needed.
- When creating the db file, create a metadata table which contains the
format version info, so we can upgrade nicely to other formats.
- Create an upgrade_db() function which allows us to upgrade from any
previous file format to the current one (including plain text)
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
A typo prevented us from enforcing singlethreading mode when selecting debugging.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
Using threading._VERBOSE=1 is broken since python 2.6 till at least
python 3.2, (http://bugs.python.org/issue4188) so we can't use it for
our thread debugging.
Remove the usage of threading._VERBOSE, and implement a "light thread
debug log" that for now outputs information when a new thread is being
registered and when it is being unregistered. I am sure we will be able
to add more thread debugging information over the time.
Besides '-d thread' this will re-enable the usage of -d 'all' for the
most verbose debugging of all categories.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
When our LocalStatus cache is corrupt, ie e.g. it contains lines not in
the form number:number, we would previously just raise a ValueError
stating things like "too many values". In case we encounter clearly
corrupt LocalStatus cache entries, clearly raise an exception stating
the filename and the line, so that people can attempt to repair it.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
This should get rid of intermittent network failures, but lets us bail
out on permanent errors.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
By aborting the account syncing, the looping and logging an error
message. We will introduce a ui.error() rather than a ui.warn() function
which saves all Exceptions in a Queue and outputs them at the end of the
program.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
In case we misconfigured a server name or are otherwise offline, a
socket.gaierror will be raised when attempting to connect. We catch that
case and raise an OfflineImapError with severity ERROR.REPO, meaning we
should stop syncing this account and continue with the next one.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
This Exception can be thrown whenever a sync error occurs. It is used
for outputting sensible error messages to the user and it denotes a
"severity", it can tell offlineimap if we need to abort a message, a
folder, a repo sync, or whether we should indeed abort immediately.
The exception is not yet used in the code.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
Currently, account.syncrunner() has 2 separate duplicated code paths
depending on whether we want to autorefresh after some waiting perios
or not. Unify those code paths by setting "looping = False" in case
self.refeshperiod == 0 after the first run. Behavior is identical to
before.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
This commit enables true 1-way syncing between repositories. This has
often been demanded for backup purposes when you do not want to cause
accidental modifications of your backup that would be propagated to the
other side.
This has been implemented by allowing to configure a Repository as
'readonly' to forbid any modification on it.
'readonly' applies to all the type of repositories.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
This debug type will always be enabled whenever any debugging is enables
and it outputs debug messages that cannot be categorized among any of
imap, maildir (e.g. things that concern the sync logic).
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
Improve the code documentation (still much more to do) and also add some
more meat to the structure of the developer documentation.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
This function will need much more "robustifying", but the very least we
can do is to print the file name and line that are giving trouble.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
Allow leading and trailing spaces in folder names specified on the
command line.
Reviewed-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Dan Christensen <jdc@uwo.ca>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
in accounts.sync() we would holdordropconnections() after each sync. But
depending on the repository configuration that might imply that
offlineimap tries to keep the same connections. But when a sync failed,
e.g. after a user had his computer suspended, it might be that our
connections that we have are worthless. So definitely drop them after a
failed sync.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
Add some comments how the data structures actually look like.
Describe the function properly, and make sure we only hold on to the
data connection as quickly as possible.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
This was in the code for a very long time, it seems.
Remove one instance, no functional changes.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
uncritical patch, but we can make the code a bit shorter so why not.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
So we can simply hand a repository instance to error messages rather than
having to call Repository().getname() all the time.
This is not used yet.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
So we can simply hand an account instance to error messages rather than
having to call Account().getname() all the time.
This is not used yet.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
Just clean up lines which end in whitespaces.
Also adapt the copyright to the current year while touching the file.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
In order to optimize performance, we fold the 1st and 2nd pass of our
sync strategy into one. They were essentially doing the same thing:
uploading a message to the other side. The only difference was that in
one case we have a negative UID locally, and in the other case, we have
a positive one already.
This saves some time, as we don't have to run through that function on
IMAP servers anyway (they always have positive UIDs), and 2nd were we
stalling further copying until phase 1 was finished. So uploading a
single new message would prevent us from starting to copy existing
regular messages.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
For each folder we were making a second IMAP request asking for the
latest UID and compared that with the highest UID in our
statusfolder. This catched the case that 1 mail has been deleted by
someone else and another one has arrived since we checked, so that the
total number of mails appears to not have changed.
We don't capture anymore this case in the quickchanged() case.
It improves my performance from 8 to about 7.5 seconds per check (with lots of
variation) and we would benefit even more in the IMAP<->IMAP case as we do one
additional IMAP lookup per folder on each side then.
Do cleanups on whitespaces while in this file.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
* IMAP4_Tunnel constructor should support base-class arguments, in
order to support the timeout argument.
* IMAP4_Tunnel needs to store the member IMAP4.host, which is normally
done in IMAP4.open().
* Update IMAP4_Tunnel.read() and IMAP4_Tunnel.send(). We turn on
nonblocking mode for these sockets, so we can return immediately
with whatever data is available.
Signed-off-by: Ethan Glasser-Camp <ethan@betacantrips.com>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
This contains a fixed Time2InternalDate function and a more robust
socket connection, trying twice and raising an error only when that
fails (I believe). The actual code changes are rather minor.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Reviewed-by: Ethan Glasser-Camp <ethan@betacantrips.com>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
quickchanged() was iterating a lot, make use of some of the helper
functions that had been introduced recently and document the function a
bit better. No functional change.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
Previously ALL spaces had been stripped off. Now, only strip spaces
around the comma, so -f "INBOX, Deleted Mails" will work. You will still
need to quote or escape spaces so the shell hand the list as one command
line argument to offlineimap.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
getmessagelist() is slow for the mapped UID case, so replace some of its
occurences with calls that are optimized for this case, ie
getmessagecount() and uidexists().
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Reviewed-and-tested-by: Vincent Beffara <vbeffara@ens-lyon.fr>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
We are calling getmessagelist() internally a lot, e.g. just to check if
a UID exists (from uidexist()). This is a very expensive operation in
the UIDMapped case, as we reconstruct the whole messagelist dict every
single time, involving lots of copying etc.
So we provide more efficient implementations for the uidexists()
getmessageuidlist() and getmessagecount() functions that are fast in the
UIDMapped case. This should solve the performance regression that was
recently observed in the Mapped UID case.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Reviewed-and-tested-by: Vincent Beffara <vbeffara@ens-lyon.fr>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
Signed-off-by: David Favro <offlineimap@meta-dynamic.com>
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
When uploading a new message to Gmail we need to find out the UID it
assigned it, but Gmail does not advertize the UIDPLUS extension (in all
cases) and it fails to find the email that we just uploaded when
searching for it. This prevented us effectively from uploading to
gmail.
See analysis in
http://lists.alioth.debian.org/pipermail/offlineimap-project/2011-March/001449.html
for details on what is going wrong.
This patch increases compatability with Gmail by checking for APPENDUID
responses to an APPEND action even if the server did not claim to
support it. This restores the capability to upload messages to the
*broken* Gmail IMAP implementation.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Without this, trying to Ctrl-C out of offlineimap will go into a hang.
Signed-off-by: Ethan Glasser-Camp <ethan@betacantrips.com>
Reviewed-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
All other instances were converted to format crash output including a
stacktrace, but this one seems to have been left out. Make Exceptions
print their stacktrace here too.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
The three classes with names starting with UsefulIMAP4 were used for two
purposes, to include the UsefulIMAPMixIn class and to implement various
system-specific kludges. None of these kludges remain, so it is cleaner
to include UsefulIMAPMixIn directly in imaplibutil and forget about them
for good.
Signed-off-by: Vincent Beffara <vbeffara@ens-lyon.fr>
Reviewed-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
Now that we do not need any system-specific hack, the three UsefulIMAP4
classes have become empty and should be removed. This implies importing
UsefulIMAPMixIn directly from the classes defined in imaplibutil.
Prepare this change by moving the code into imaplibutil.py. Functionally
this is a no-op.
Signed-off-by: Vincent Beffara <vbeffara@ens-lyon.fr>
Reviewed-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
Because of a buggy realloc() implementation in earlier versions of
Python on Mac OS X, we had to cut reads into manageable chunks by hand;
this is no more needed with Python 2.6, and besides it causes problems
with imaplib2, which we now use. Revert the special case to use the
system's read() instead, which is now safe.
Signed-off-by: Vincent Beffara <vbeffara@ens-lyon.fr>
Reviewed-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
As the LocalStatus and UIDMap backend already did: If the uid already
exists for savemessage(), only modify the flags and don't append a new
message.
We don't invoke savemessage() on messages that already exist in our sync
logic, so this has no change on our current behavior. But it makes
backends befave more consistent with each other.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
- Some documentation improvements, this is a severely underdocumented
class. This still needs some further improvements though.
- Don't use apply(Baseclass) (which is going away in Python 3), use
IMAPFolder.__init__(self, *args, **kwargs).
- Don't call ValueError, string. It is ValueError(string)
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
We were not able to handle ~/... type of path configurations and we
crashed with mysterious SSL errors when no file was found at the
configured location. Expand '~' and bomb out with usable error messages
in case such a file does not exist. This will still not protect against
corrupt cacert files but it goes a long way towards user friendliness.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
imaplib2 does not use socket, so does not know about the
defaulttimeout we set based on the config. Instead, we explicitly pass
the default timeout.
Signed-off-by: Ethan Glasser-Camp <ethan@betacantrips.com>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
For read(), the imaplib2 version seems to work perfectly well. The
others aren't used any more, either by imaplib2, nor by us, so we may
as well get rid of them.
Signed-off-by: Ethan Glasser-Camp <ethan@betacantrips.com>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
The biggest change here is that imapobj.untagged_responses is no
longer a dictionary, but a list. To access it, I use the semi-private
_get_untagged_response method.
* offlineimap/folder/IMAP.py (IMAPFolder.quickchanged,
IMAPFolder.cachemessagelist): imaplib2 now explicitly removes its
EXISTS response on select(), so instead we use the return values from
select() to get the number of messages.
* offlineimap/imapserver.py (UsefulIMAPMixIn.select): imaplib2 now
stores untagged_responses for different mailboxes, which confuses us
because it seems like our mailboxes are "still" in read-only mode when
we just re-opened them. Additionally, we have to return the value
from imaplib2's select() so that the above thing works.
* offlineimap/imapserver.py (UsefulIMAPMixIn._mesg): imaplib2 now
calls _mesg with the name of a thread, so we display this
information in debug output. This requires a corresponding change to
imaplibutil.new_mesg.
* offlineimap/imaplibutil.py: We override IMAP4_SSL.open, whose
default arguments have changed, so update the default arguments. We
also subclass imaplib.IMAP4 in a few different places, which now
relies on having a read_fd file descriptor to poll on.
Signed-off-by: Ethan Glasser-Camp <ethan@betacantrips.com>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
imaplib2 has slightly different semantics than standard imaplib, so
this patch will break the build, but I thought it was helpful to have it as
a separate commit.
Signed-off-by: Ethan Glasser-Camp <ethan@betacantrips.com>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
This change does not do anything yet with imaplib2, merely makes it
available for future commits.
This file is identical to the one at
http://sydney.edu.au/engineering/it/~piers/python/imaplib2 .
imaplib2, written by the same guy who wrote imaplib, is very different
from imaplib itself. Calling it a modified version from the standard
distribution is misleading. It's more like a complete rewrite. As
such, it's not really possible to summarize what was changed.
The largest thing is that imaplib2 is "threaded". Instead of doing
blocking writes/reads on the socket during/after every command,
imaplib2 forks off threads to read and write to the socket based on
input and output buffers. This opens the door to asynchronous
commands (every command is potentially asynchronous, according to the
docs), and in particular IDLE, which is by definition an asynchronous
command.
The author writes: "imaplib2 can be substituted for imaplib in
existing clients with no changes in the code", but that's pretty
misleading. It might be true for certain simple users of imaplib, but
for us it's completely false. Among other things, how untagged
responses are stored in-memory is different -- instead of a hash
table, it's a list. I'm guessing this is to preserve order of
responses.
I think there are other miscellaneous improvements, like I think
imaplib2 is IPv6 safe out-of-the-box, but I haven't conducted an
extremely thorough examination of the differences :)
Signed-off-by: Ethan Glasser-Camp <ethan@betacantrips.com>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
The rfc822 module has been deprecated since python 2.3, and conversion to
the email module is straightforward, so let us do that. rfc822 is
completely gone in python3.
This also fixes a bug that led to offlineimap abortion (but that code path
is apparently usually not exercised so I did not notice:
rfc822|email.utils.parsedate return a tuple which has no named attributes,
but we were using them later in that function. So pass the tuple into a
struct_time() to get named attributes.
While reading the docs, I noticed that email.parsedate returns invalid
daylight savings information (is_dst attribute), and we are using it
anyway. Oh well, the imap server might think the mails are off by an hour
at worst.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
The only reason we used it here was to do a
traceback.print_exc(StringIO()) to get a string of our traceback. But we
can simply use traceback.format_exc() which exists since python 2.4.
One less module (and it is in the way to python 3 compatability too)
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
In commit 7a2a0225 [Don't pass list to ui.adding/deletingflags] we changed the
list logic for a per folder logic but forgot to remove one instance of
"destlist" which isn't valid anymore.
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
More convenient way to test if a certain uid exists and getting a list
of all uids. Also, the SQL backend will have efficient overrides for
these methods.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
Rather than always having to call len(getmessagelist.keys()) as was done
before. No functional change, just nicer looking code. Also the SQLite
backend or other backends could implement more efficient implementations.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
Previously we would output:
Folder sync sspaeth.de[INBOX.INBOX201004]:
Syncing INBOX.INBOX201004: IMAP -> Maildir
Folder sync sspaeth.de[INBOX.INBOX201006]:
Syncing INBOX.INBOX201006: IMAP -> Maildir
Folder sync sspaeth.de[INBOX.INBOX201009]:
Syncing INBOX.INBOX201009: IMAP -> Maildir
which is very repetitive and cluttered. By naming the folder sync
threads just according to the account and not the folder, the output
looks much nicer:
Folder sync [sspaeth.de]:
Syncing INBOX.INBOX201004: IMAP -> Maildir
Syncing INBOX.INBOX201006: IMAP -> Maildir
Syncing INBOX.INBOX201009: IMAP -> Maildir
If syncing multiple accounts in parallel, we will still get headers
indicating the account:
Folder sync [sspaeth.de]:
Syncing INBOX: IMAP -> Maildir
Syncing INBOX.INBOX201006: IMAP -> Maildir
Folder sync [gmail]:
Syncing INBOX: IMAP -> Maildir
This is a small fix that makes the output much nicer in my opinion.
Also don't output the thread name if we are in the MainThread, e.g. when
we output the initial offlineimap banner.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
Read() should return empty string when EOF happen, instead of looping
forever. This is the right semantics of read(), and a wrapped version
should not change it.
If you read the read(2) system call manpage, it tells you that when EOF
is seen, return value is 0; it does not say
``loop forever when EOF happen''.
After the EOF detection is patched you can see the
following exception:
WARNING: ERROR attempting to copy message 344 for account Gmail:Traceback (most recent call last):
File "/usr/lib/pymodules/python2.6/offlineimap/folder/Base.py", line 282, in copymessageto
message = self.getmessage(uid)
File "/usr/lib/pymodules/python2.6/offlineimap/folder/IMAP.py", line 216, in getmessage
initialresult = imapobj.uid('fetch', '%d' % uid, '(BODY.PEEK[])')
File "/usr/lib/python2.6/imaplib.py", line 753, in uid
typ, dat = self._simple_command(name, command, *args)
File "/usr/lib/python2.6/imaplib.py", line 1060, in _simple_command
return self._command_complete(name, self._command(name, *args))
File "/usr/lib/python2.6/imaplib.py", line 890, in _command_complete
raise self.abort('command: %s => %s' % (name, val))
abort: command: UID => socket error: EOF
Signed-off-by: Bao Haojun <baohaojun@gmail.com>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
We only have one "dstfolder" at a time when deleting/adding flags, so no
need to pass in a list of those to the ui functions that output the log
info.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
They were not PEP-8 formatted, and some imports were simply
unnecessary. Removed those.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
This enables us to just use the folder instance in the ui output and get
a name rather than having to call getname() all the time.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
The previous syncing strategy was doing more than we needed to and was a
bit underdocumented. This is an attempt to clean it up.
1) Do away with the previous different code paths depending on
whether there is a LocalStatus file or not (the isnewfolder() test). We
always use the same strategy now, which makes the strategy easier to
understand. This strategy is simply:
a) Sync remote to local folder first
b) Sync local to remote
Where each sync implies a 4 pass strategy which does basically the same
as before (explained below).
2) Don't delete messages on LOCAL which don't exist on REMOTE right at
the beginning anymore. This prevented us e.g. from keeping local
messages rather than redownloading everything once LocalStatus got
corrupted or deleted. This surprised many who put in an existing local
maildir and expected it to be synced to the remote place. Instead, the
local maildir was deleted. This is a data loss that actually occured to
people!
3) No need to separately sync the statusfolder, we update that one
simultanously with the destfolders...
3) Simplified the sync function API by only taking one destdir rather
than a list of destdirs, we never used more anyway. This makes the code
easier to read.
4) Added plenty of code comments while I was going through to make sure
the strategy is easy to understand.
-----------------------------------------
Pass1: Transfer new local messages
Upload msg with negative/no UIDs to dstfolder. dstfolder should
assign that message a new UID. Update statusfolder.
Pass2: Copy existing messages
Copy messages in self, but not statusfolder to dstfolder if not
already in dstfolder. Update statusfolder.
Pass3: Remove deleted messages
Get all UIDS in statusfolder but not self. These are messages
that we have locally deleted. Delete those from dstfolder and
statusfolder.
Pass4: Synchronize flag changes
Compare flags in self with those in statusfolder. If msg has a
valid UID and exists on dstfolder (has not e.g. been deleted
there), sync the flag change to dstfolder and statusfolder.
The user visible implications of this change should be unnoticable
except in one situation:
Blowing away LocalStatus will not require you to redownload ALL of
your mails if you still have the local Maildir. It will simply recreate
LocalStatus.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
Removing this lock makes the function not threadsafe, but then it is
only ever called from one thread, the main account syncer. Also, it
doesn't make it worse than most of the other functions in that class
which are also not threadsafe.
Removing this makes the code simpler, and removes the need to import the
threading module.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
The previous ui names were pretty unwieldy. Is it TTYUI.TTY or
TTY.TTYUI? Do I have to use capitals and where?
Simplify the names by making them case insensitive and by dropping
everything before the dot.
So "Curses.Blinkenlights" can now be invoked as "blinkenlights" or
"BLINKENLIGHTS". The old names will still work just fine so the
transition should be smooth. We issue a warning that the long names are
deprecated.
Document in offlineimap.conf that we don't accept lists of fallback UIs,
but only one UI option (this was already the case before this commit but
still wrongly documented).
The list of accepted ui names is:
ttyui (default), basic, quiet, machineui, blinkenlights
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
Multithreading speeds up account syncing a lot and the offlineimap
defaults are very conservative. Let's make it use 2 IMAP connections by
default to gain some of the benefits that offlineimap offers.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
Rather than inserting our own home-grown header, everytime we save a
message to an IMAP server, we check if we suport the UIDPLUS extension
which provides us with an APPENDUID reply. Use that to find the new UID
if possible, but keep the old way if we don't have that extension.
If a folder is read-only, return the uid that we have passed in per API
description in folder.Base.py
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
The working horse of the savemessage() function, imaplib.append() was
hidden away in an assert statement. Pull the real functions out of the
asserts and simply assert on the return values. This looks less
convoluted and makes this easier to understand in my opinion.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
savemessage was too long and complex. Factor out the date guessing part
of the function and put it into a function of its own. The logic of the
date guessing is the same, however, we do not use the
imaplib.Time2InternalDate() function as it is buggy
(http://bugs.python.org/issue11024) and returns localized patches. So we
create INTERNALDATE ourselves and pass it to append() as a string.
This commit fixes a bug that international users used to pass an invalid
date to the IMAP server, which the server will either ignore or complain
about.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
savemessage_getnewheader was an undocmented, cryptic and overengineered
function. It generates a new unique value that can be used as a mail
header to be inserted. For this it used LOTS of randomness sources: hash
of the mail content, hash of the folder name, hash of the repository
name, the current time, a random() value, and the offlineimap version string.
All we need is something random. So reduce this to hash of content
appended by a random integer. Sufficient and somewhat faster to calculate.
Rename the function to actually describe accurately what it does or
would you have guessed that savemessage_getnewheader() did nothing more
than returning ('X-OfflineIMAP', <randomstring> )? Rename to
generate_randomheader() to make it clearer what this is all about.
Also document the function, describing what it does, and what it returns.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
There is a clumsy workaround for Darwin that chunks reads into 8kb
blocks to avoid huge memory allocations. First, this fix should not only
be required but on FreeBSD2.6 too (see
http://bugs.python.org/issue3531). Second, decent python versions (I
checked 2.6) already chunk in the SSL case anyway, so there is no need to do
that again. Remove that level of indirection.
http://evanjones.ca/python-memory.html claims that this problem has been
fixed since python 2.5, so we might consider removing the workaround
completely even for the non-SSL case.
Increase the chunk size on Mac from 8kb to 64kb. Even Macs should be
able to take that amount of memory usage nowadays.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
A typo was preventing profiling mode to really enable singlethreading
mode. Fixing the unfortunate typo of mine makes it work.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
It is currently very hard to find out what folderfilter actually does
and makes it hard to debug for a user. With this patch if the user has
enabled "-d imap" (even better would perhaps be a different debug type
for this kind of thing?), we see a message
"Filtering out folder 'foo' due to folderfilter"
in the logs.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
This enables us to make use of self.ui in all repositories without
having to import and use getglobalui() in all types of repositories and
all places.
Note that this patch only makes this available, it does not yet make use
of it.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
When e.g. specifying an invalid 'reference' value for an IMAP server to
a root folder that does not exist, we would previously have crashed with
a nonsensical and non-intuitive error message (trying to address an
element of a NoneType).
This will also raise an Exception (which should be ok, given that this
is really a misconfiguration on the user side), but it will explain to
the user WHY it exited.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
The debug output for dequote, optionsplit is very verbose, outputing
what the functions are called with and what they return. Those functions
are now very old mature and rather simple, so it suffices to output
their return value rather than cluttering out log with too much
uninteresting garbarge.
This makes log files much more readable.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
A Repository() returns the correctly instanciated dervivate of a
BaseRepository, depending on the parameters passed to it. The returned
instance is eg an ImapRepository(). This makes the code look nicer,
and we have less functions lying around outside of classes (no more
global LoadRepository() function).
This will also enable us to conveniently hand back a
LocalStatusRepository based on SQLITE rather than plain text, if the
user configures this to be the experimental and optional backend
(once it exists).
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
This seems to prevent mysterious hangs with SSL imap servers (especially
gmail?) and does not harm in any case. So let us enable keep-alive
messages for ssl connections.
Our thread pool should be made more robust against closed SSL
connections (which do not always seem to raise Exceptions), and not
deadlock while waiting for resources or data that will never arrive.
Reviewed-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Gábor Melis <mega@retes.hu>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
Commit e506442996 changed getglobalui() back to UIBase.getglobalui()
although the import had changed earlier, causing a regression.
Fix this by using the correct and current way of calling the ui.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
Signed-off-by: Thomas Jost <schnouki@schnouki.net>
Reviewed-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
There is no need for using the string module if all we want is to split
a string at the white space. All pythons since at least 2.4 can do that.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
We have vonverted all places in folder/* to have self.ui available,
rather than having to use UIBase.getglobalui() all the
time. Unfortunately, we did not convert the users in folder/Base.py.
This patch does it belatedly. This fixes
http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=613483
Signed-off-by: Sebastian Spaeth1 <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
I accidentally added "self" as first parameter to the signal handler
method. Of course it is not called with a class instance, the signal
handler always only receives 2 parameters: the signal number and the
stack frame. So just removing the self fixes things.
Proposed-by: Christian Holme <cholme@gmx.com>
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
Code was broken, as these backends import UIBase (which had been moved).
However, they don't use it, so we can just delete the import.
Sorry, I failed to find those earlier somehow.
Signed-off-by: Sebastian <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
AccountSynchronizationMixin was never used on its own and it is a very
confusing class until you understand what it is used for. (It
complemented the Account() class with a few methods to make Account()
syncable.
But we use the SyncableAccount class anyway, so merge the former Mixin'
methods directly in there.
This does away with a class that is not directly used, and was a case of
over-object-orientation which confuses more than it helps.
Touched up code documentation while going through the file.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
"mailboxes" is defined global and set to an empty list, but never used
from anywhere within offlineimap. So let us just delete it.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
Signed-off-by: Edward Z. Yang <ezyang@mit.edu>
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
Make --version much less verbose and only print out the version number
to facilitate easy parsing by scripts. We don't really need the verbose
copyright output, it is show with --help anyway.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
Currently the Curses code is broken. Importing offlineimap.ui.Curses
will not succeed due to cyclic imports (threadutils imports ui, but ui
wants threadutils.MultiLock). So Curses cannot be chosen.
Incidentally, the only part in the code that uses "MultiLock" is the
Curses UI, to prevent concurrent access from several threads to the
ui-internal thread list and to IO resources such as the
screen. Fortunately for these purposes we don't need a MultiLock, so we
can do away with that implementation completely. A simple RLock that
allows us to have a thread "own" a lock and makes other threads wanting
access to the resource wait until the owning thread is finished.
The MultiLock implementation looked a bit weird, so simplifying code
here is a good thing, it might well be that we fix some "hangs" that
have been reported (and that would only ever occur with the Curses UI).
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
This fixes some leftover of 0b5b38d298.
Signed-off-by: Thomas Schwinge <thomas@schwinge.name>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
This branch is currently broken, as we were using getglobalui() but it
was not imported. This fixes the missing import and makes offlineimap
run successfully.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
Improve documentation about what CustomConfigHelperMixin does,
it was not very clear without a close look to the code before.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
The current code path checked the CA cert host name, even if we did not
specify a CA cert file to use. Make the host name check dependent on a
CA cert file.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
All invocations of -d will imply the single-threaded mode unless one of
the debug options is "thread" (in which case it would be senseless to
force single-threaded mode).
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
Previously, we would spawn child threads for account synchronization
even if we had single-threading enabled. This prevented us from catching
the true location of exceptions, for example. Now, in single-threaded
mode, we perform the account synchronization truely in the main thread
which will ease our debugging.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
Earlier we would ignore *ALL* Exceptions that could occur during the
fsyncing of our LocalStatus database. Ignoring all Exceptions is not the
right thing here though. A recent commit improved the situation by
raising at least KeyboardInterrupt Exceptions, but that is still not
optimal.
os.fsync() is available on Unix, and Windows starting in python
2.2.3. so it should always work. If it doesn't, something is wrong.
It has been suggested to only catch EnvironmentError (ie SystemError and
OSError) here, but even those should be thrown. Something *is* wrong if
this fails and we should not ignore it.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
Previously we did not catch KeyboardInterrupts explicitly as all of the
code was executed in forked child threads which would never receive
Ctrl-c exceptions. With the upcoming single threaded modus, this code
can be run in the main thread however, so we need to take care of
KeyboardInterrupts explicitly.
This was done wherever we would catch *ALL* exceptions universally and
print out an error message.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
Previously we did not catch KeyboardInterrupts explicitly as all of the
code was executed in forked child threads which would never receive
Ctrl-c exceptions. With the upcoming single threaded modus, this code
can be run in the main thread however, so we need to take care of
KeyboardInterrupts explicitly. As this is pretty highlevel code, we also
protect against receiving a SystemExit exception which is raised e.g. in
the ui.terminate() code by calling sys.exit().
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
Make imports conform to PEP8 (one import per line), remove redundant or
unneeded imports.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
We already import threadutil, so no need to also import
threadutil.InstanceLimitedThread separately.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
The ui.detector class was not really needed and leads to the illusion
that we provide GUI plugins. For the sake of code maintainability we
don't :-).
Rather than having GUI names equivalent to the classes they are in
(which leads to weird names like TTY.TTYUI), this patch allows to give
each GUI an arbitrary string name. GUI names remain still unchanged in
this patch, the default UI when none was configured is TTY.TTYUI.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
Rather than regetting the ui with UIBase.getglobalui() all the time, we get it once in the base class and let all derivative classes just make use of self.ui rather than refetching the ui all the time, this makes for a bit less code and shorter lines.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
The latter is much shorter and looks nicer. UIBase was a very weird
name and with this patch, we don't need to use (or see) it from higher
level code anymore.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
The latter is shorter and looks nicer. UIBase was a very weird class
name for something that is "user visible". We don't need to use (or
see) it from higher level code for most of the code now.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
Move central constant definitions into __init__.py. This does away
with version.py which contained nothing else and __init__.py is where
things like __VERSION__ are usually defined.
This commit also changes code to use offlineimap.__version__ rather
than offlineimap.version.__version__ as was before. Cleaned up some
duplicate or unneeded imports while touching those, formatting import
statements per PEP8 (one import per row).
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
Previously, we did not check at all the authenticy and validity of
the SSL server we connected to. This is bad as it allows
man-in-the-middle attacks etc. This patch remedies the situation
somewhat.
If we specify a sslcacertfile= setting in the Repository section,
validate the server cert (on python>=2.6 or abort with python<=2.5).
As before, no certificate check is performed without that option.
In the future, the hostname check should be made optional and also
a mutt-lick "accept this certificate forever" thing should be
implemented.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
Move them into the correct classes, overriding the open() function.
This is what we intent to do anyway, so do it in a clean way.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
Move the command line option handling from the more manual "getopts"
module to the full fledged "OptionParser". It has the advantage of
e.g. automatically creating the Help text that is shown with the
"-h/--help" option rather than having to hardcode the text and
format the line breaking manually.
Also, do away with the version check when invoking OfflineImap so we
do not have to change the version number in three places when bumping
it.
Rename startup() to run() which sounds more in line what other modules
call their run functions (e.g. Thread.run()).
Signed-Off-By: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
On Mon, Dec 13, 2010 at 03:03:20PM -0600, Sebastian Spaeth wrote:
>
> > ...From where is the "Repository" object used?
>
> Please delete the Respository clas (repository.py) for now. I am sorry
> it sneaked it (I blame my horrible jet leg on it). I would like to
> introduce it in a later topic, but not at this time.
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
Commit 9239a2d326 broke getting the password from the UI. This
unbreaks the change and adds some extended documentation and cleanups in
the functino en-passent.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
Previoiusly, we would just bomb out with a KeyError("Foo") if a user
configured a repository Type=Foo. Or in case he tried to sync from a
Maildir to a Maildir. Still abort with an Exception now, but with one
that explains what actually had happened.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
On 12/13/2010 12:25 PM, Nicolas Sebrecht wrote:
> The release number information is hard coded. Here is a quick fix to update it
> to the last release.
>
> We may introduce more elaborated stuff to define the release dynamically.
FYI: not sure if you all saw it or changed it, but there were three
places I always changed for each new release:
offlineimap.py
bin/offlineimap
offlineimap/version.py
in particular, the value in version.py must match the value in the
offlineimap(.py) file that someone uses to start the thing up.
Reported-by: John Goerzen <jgoerzen@complete.org>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
Instead of repeating a mapping table twice, once for each direction, it is only
stored once. This is safer and faster.
As the patch stands, it makes no custom flags available. The behaviour
is exactly as before.
Patch-written-by: Dan Christensen <jdc@uwo.ca>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
the cProfile/profile modules are great for performance debugging. The
pure-python profile module has much more overhead though and the
cProfile module is recommended if it exists. This changes to import to
first try the cProfile module and then fall back to the profile
module. The cProfile/profiles modules are API compatible for all that
its worth...
If that does not exist we continue to complain as before.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
Rather than calling a function in a module, invoke offlineimap by
calling an OfflineImap object.
This removes code lying outside of objects; I prefer to keep code
within an object and provides us with a nicer Object encapsulation.
It will also ease the testing of Object functionality in unittests
when they are introduced.
Previously we would import and start Offlineimap like this:
from offlineimap import init
init.startup('6.2.0')
now we do:
from offlineimap import OfflineImap
offlineimap = OfflineImap()
offlineimap.startup('6.2.0')
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
This is very excessive and a bit annoying. Output that information
only if the next line concerns a different account/thread than the
previous one. This quiets down the UI quite a bit without losing
information.
While modifying this line, use the newer Thread.name and not the as
per python doc's old syntax getName()
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
Only every 10 seconds. Also fix up the documentation of that function
while at it. The Curses ui actually implements user abort it
seems. Not sure if we could do the same in the UIBase, but that is for
another time.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
Rather than poll our exitthread Queue in a non-blocking fashion and
always sleep for 1 second inbetween, simply call it in a blocking
fashion which will return immediately when a thread has exited. This
is somewhat faster as we don't do unnecessary sleeps after a thread
exited.
Do note that we need to specify some timeout value here (the 60 chosen
is pretty arbitary, but what the value exactly is, is not that
important, it could be any positive value) in order to make the
Queue.get() call work with SIGINT (cf
http://bugs.python.org/issue1360).
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
Straightforward reformatting of the Error output to look nicer on the eyes.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
All other uis (especially BaseUI) define as warn(self, msg, minor = 0)
just MachineUI required minor without a default. This leads the
Machine UI to error out with an exception if we pass it
ui.warn("string") which is the common thing in our code base. This
patch is therefore small but critical in fixing this UI.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
Change the X-OfflineIMAP header to work around possible Exchange MAPI
table overflow problem described in
http://article.gmane.org/gmane.mail.imap.offlineimap.general/1699
(It is unknown whether this problem still exits in current
Exchange versions, but let's assume the worst.)
The X-OfflineIMAP header is neccessary with some IMAP servers to
reliably determine the UID of a new messages uploaded to the server
by using the "UID SEARCH HEADER name string" command. Since this
command compares header name and value it is sufficient to have
a unique header value and a non-unique header name.
Note that a message can have more than one X-OfflineIMAP header if
the message was copied between IMAP folders multiple times.
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
Python 2.4 doesn't allow try...except...finally clauses, see PEP
341. Also, yield statements inside try...finally is not allowed. The
commit changes the logic to no longer use those syntactical features.
Signed-off-by: Nicolas Sebrecht <ni.s@laposte.net>
Hello John,
i fixed some tiny bugs in offlineimap, mainly just for myself. They are
more dirty fixes than real bugfixes since I'm missing the deeper insight
into the code.
Especially the first one for Curses.py is very dirty and breaks the
scaling of the interface when the terminal size changes, but at least
the terminal is in proper state after exiting offlineimap.
In the order of appearance in the patchfile:
1. 'fixes' terminal breakage on quit of curses interface in python 2.6
to 2.6.5 (fixed since 2.6.6 http://bugs.python.org/issue7567)
2. fixes netrc password authentication
3. fixes user name querying from netrc
The patch is made for git revision 6b1cb5e036
Thanks a lot for the great application!
Best regards,
buergi
After tens of thousands of messages on the IMAP server were deleted it
takes offlineimap extremely long time (several hours of high CPU usage)
to delete them locally. It spends almost all the time modifying
LocalStatus. It processes the messages one by one, rewriting the
folder's status file in LocalStatus after each message.
It is much more efficient to save the status file only once, after
removing all the messages from the messagelist.
Deleting lots of messages now takes seconds instead of hours.
This should solve Debian bug #518093:
http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=518093
Signed-off-by: Michal Schmidt <mschmidt@redhat.com>
Dear All,
I have made the attached patch to try and make offlineimap a bit more
stable in challenging situations. It's extremely useful in slow
connection environments - but sometimes if one account had the wrong
password or the connection went down then unfortunately the whole
program would crash.
I have tested this on our connection and tried throwing at it just about
every situation - connection, up down, up, down again, change password,
error whilst copying one message, etc. I have been running this patch
for the last 5 days or so syncing 6 accounts at the moment... It seems
to work and stay alive nicely (even if your connection does not)...
Hope that this can go in for the next release... Please let me know if
anyone notices any problems with this...
Regards,
-Mike
-- Attached file included as plaintext by Ecartis --
-- File: submit
From 1d6777cab23637eb830031c7cab0ae9b8589afd6 Mon Sep 17 00:00:00 2001
From: mike <mike@mikelaptop.(none)>
Date: Mon, 24 Aug 2009 19:37:59 +0430
Subject: [PATCH] This patch attempts to introduce a little more error handling - e.g.
if one account has an error because of a changed password or something
that should not affect the other accounts.
Specifically:
If one sync run has an issue this is in a try-except clause - if it
has an auto refresh period the thread will sleep and try again - this
could be quite useful in the event of the connection going down for a
little while, changed password etc.
If one folder cannot be created an error message will be displayed through
the UI and the program will continue (e.g. permission denied to create a folder)
If one message does not want to copy for whatever resaon an error message
will be displayed through the UI and at least the other messages will
be copied
If one folder run has an exception then the others will still run
Dear All,
Attached is the patch that I have developed to provide maxage and
maxsize options. You can thus sync only the last x days of messages and
exclude large messages. All details in the attached git file.
Regards,
-Mike
-- Attached file included as plaintext by Ecartis --
-- File: submit
From 04fead2b46a79675a5b29de6f2b4088b9c9448e5 Mon Sep 17 00:00:00 2001
From: mike <mike@mikelaptop.(none)>
Date: Sun, 16 Aug 2009 17:00:49 +0430
Subject: [PATCH] Patch to provide maxage and maxsize account options to exclude old/large messages
This is designed to make offlineimap even better for low bandwidth connections.
maxage allows you to specify a number of days and only messages within
that range will be considered by offlineimap for the sync. This can be
useful if you would like to start using offlineimap with a large
existing account and do not want to import large archives of mail.
maxsize allows you to specify the maximum size of a message to consider so
that you can exclude messages with large attachments etc.
In both cases the cachemessagelist function of the folder was modified to ignore
messages that do not meet the criteria. If the criteria are not specified
then the existing code will be executed the same as before. If a message
does not meet the criteria it will be as though this message does not exist
- offlineimap will completely ignore it. It will not have flags updated,
it will not be deleted, it will not be considered at all.
When operating against an IMAP repository a server side search function
is used. This of course requires support for server side search.
I have tested this with either option, no options etc. against IMAP, Maildir
and Gmail. I have run variations of this patch here for the last 3 weeks or
so syncing about 4 accounts normally.
This reverts commit 220db8a77d.
From: Daniel Jacobowitz
Date: July 17, 2009
The documentation may have been unclear, but quick never worked the
way this patch changes it. My installed offlineimap does one sync
every $autorefresh minutes, and the $quick'th one is a full sync. All
the others are quick. Now it's going to do a full sync every
$autorefresh minutes and a ludicrous number of $quick syncs.
-- Daniel Jacobowitz CodeSourcery
Hello John,
The attached patch makes quick synchronization work again (according to
the documentation), so there are <quick> quick synchronizations
performed between full synchronizations.
Thanks,
Michal
* fixes rh bz #510036
Signed-off-by: Christoph Höger <choeger@cs.tu-berlin.de>
[ per jgoerzen: rh bz #510036 is Kerberos issue. also Closes: #535794 in Debian ]
Closes: #535160
Bug#535160: offlineimap fails on encfs (FUSE) due to hard linking
Package: offlineimap
Version: 6.0.3
Severity: normal
Tags: patch
Hi,
if the localrepository is stored on an encfs, offlineimap fails as follows:
OfflineIMAP 6.0.3
Copyright (C) 2002 - 2008 John Goerzen <jgoerzen@complete.org>
This software comes with ABSOLUTELY NO WARRANTY; see the file
COPYING for details. This is free software, and you are welcome
to distribute it under the conditions laid out in COPYING.
***** Processing account pleione
Copying folder structure from IMAP to Maildir
Establishing connection to tunnel:eval `keychain --quiet --eval` && ssh -q mymailhost /usr/sbin/dovecot --exec-mail imap.
Syncing Drafts: IMAP -> Maildir
Syncing INBOX: IMAP -> Maildir
----------8<----------
Syncing net: IMAP -> Maildir
Copy message 360 IMAP[net] -> Maildir[net], LocalStatus[net]
Syncing personal: IMAP -> Maildir
Thread 'Copy message 360 from net' terminated with exception:
Traceback (most recent call last):
File "/var/lib/python-support/python2.4/offlineimap/threadutil.py", line 149, in run
Thread.run(self)
File "threading.py", line 422, in run
self.__target(*self.__args, **self.__kwargs)
File "/var/lib/python-support/python2.4/offlineimap/folder/Base.py", line 282, in copymessageto
newuid = object.savemessage(uid, message, flags, rtime)
File "/var/lib/python-support/python2.4/offlineimap/folder/Maildir.py", line 198, in savemessage
os.path.join(tmpdir, messagename))
OSError: [Errno 1] Operation not permitted
Last 4 debug messages logged for Copy message 360 from net prior to exception:
----------8<----------
As encfs does not support hard linking, the rename of the temporary
message file fails.
This is the only occurrence of hard linking in offlineimap and can be
fixed by using an atomic `os.rename` instead of `os.link`+`os.unlink`.
I have been using the attached patch for more than 1.5 years and have
never again had any problems with offlineimap on encfs.
Regards,
Peter
On Tue, Apr 21, 11:19:00 -0500, John Goerzen wrote:
> I think the one loss of functionality we have here is that it doesn't
> check if a given account has already been listed before adding to the
> list. Should be a simple tweak. If you could tweak that and test, I'd
> apply a new patch.
Good catch. I attach an updated patch which I've tested and it appears
to work fine, including not syncing two accounts twice.
Thanks,
--
Jonny Lamb, UK
jonny@debian.org
From 7f348ee116bba64f7330e28d4e7b2c015910a890 Mon Sep 17 00:00:00 2001
From: Jonny Lamb <jonny@debian.org>
Date: Tue, 05 May 2009 20:45:17 +0100
Subject: [PATCH] Respect order of general.accounts config setting.
This makes the order of account synchronisation the same as the order of
the general.accounts setting by using a list instead of a dict, which
was actually pointless as the value of each dict item was never even
looked at.
Signed-off-by: Jonny Lamb <jonny@debian.org>
Patch from Eric Dorland
Closes: #470875
From: Wouter Verhelst
Subject: kerberos authentication works only the first time
Date: Fri, 14 Mar 2008 09:28:37 +0100
Package: offlineimap
Version: 5.99.8
Severity: normal
Hi,
I have the "autorefresh" configuration option specified in my
.offlineimaprc, and am now using the kerberos authentication.
However, this kerberos authentication seems to work only the first
time
offlineimap tries to fetch mails. The next time, it fails with this
output:
Thread 'Account sync Test' terminated with exception:
Traceback (most recent call last):
File "/var/lib/python-support/python2.4/offlineimap/threadutil.py",
line 153, in run
Thread.run(self)
File "/usr/lib/python2.4/threading.py", line 422, in run
self.__target(*self.__args, **self.__kwargs)
File "/var/lib/python-support/python2.4/offlineimap/accounts.py",
line 119, in syncrunner
self.sync()
File "/var/lib/python-support/python2.4/offlineimap/accounts.py",
line 148, in sync
remoterepos.syncfoldersto(localrepos, [statusrepos])
File
"/var/lib/python-support/python2.4/offlineimap/repository/Base.py",
line 135, in syncfoldersto
srcfolders = src.getfolders()
File
"/var/lib/python-support/python2.4/offlineimap/repository/IMAP.py",
line 192, in getfolders
listresult = imapobj.list(directory =
self.imapserver.reference)[1]
File "/usr/lib/python2.4/imaplib.py", line 469, in list
typ, dat = self._simple_command(name, directory, pattern)
File "/usr/lib/python2.4/imaplib.py", line 1028, in _simple_command
return self._command_complete(name, self._command(name, *args))
File "/usr/lib/python2.4/imaplib.py", line 787, in _command
raise self.error(
error: command LIST illegal in state NONAUTH
Paul Hinze <paul.t.hinze@gmail.com> on 2008-12-22 at 19:16:
> I did a bit of debugging and asking around in #python and it turns out
> that because Maildir.py uses a conditional import of md5 from either
> hashlib or the md5 module, the md5.new() call is not always correct.
> The attached patch should fix this problem.
Thanks to Daniel Rall for pointing out that the attachment got stripped
off my last message. Patch follows.
Paul
----
From e01fdfbf62c61c31b514e826e6cc00fb98d88808 Mon Sep 17 00:00:00 2001
From: Paul Hinze <paul.t.hinze@gmail.com>
Date: Mon, 22 Dec 2008 18:42:44 -0600
Subject: [PATCH] Fixing md5 import when hashlib is available
Thanks to habnabit and Rhamphoryncus in #python for help debugging
Here's the way I'd like to use offlineimap on my laptop:
1. Have a regular cron job running infrequently. The cron job
checks to see
if I'm online, plugged in, and that no other copy of offlineimap is
running. If
all of these conditions are satisfied, it runs offlineimap just once:
"offlineimap -o -u Noninteractive.Quiet"
2. When I start up mutt, I do it by calling a wrapper script that
delays
until cron-started copies of offlineimap have finished, then starts
offlineimap
on its regular, stay-alive and keep checking schedule. When I quit
mutt, the
wrapper script tells offlineimap to stop.
This way I get frequent regular checks while I have mutt running, but
I don't
waste my battery/cpu checking frequently for mail when I'm not
interested in
it.
To make this work, though, it'd be nicer if it were easier to tell
offlineimap,
from the outside, things like "terminate cleanly now" and "when you've
finished
synching, then terminate instead of sleeping and synching again."
OK, to put my money where my mouth is, I attach two patches against
offlineimap
6.0.3.
The first, "cleanup.patch", cleans up a few spots that tend to throw
exceptions
for me as offlineimap is exiting from a KeyboardInterrupt.
The second adds signaling capabilities to offlineimap.
* sending a SIGTERM tells offlineimap to terminate immediately but
cleanly,
just as if "q" had been pressed in the GUI interface
* sending a SIGUSR1 tells every account to do a full sync asap: if
it's
sleeping, then wake up and do the sync now. If it's mid-sync, then
re-synch
any folders whose syncing has already been started or completed, and
continue
to synch the other, queued but not-yet-synched folders.
* sending a SIGHUP tells every account to die as soon as it can (but
not
immediately: only after finishing any synch it's now engaged in)
* sending a SIGUSR2 tells every account to do a full sync asap (as
with
SIGUSR1), then die
It's tricky to mix signals with threads, but I think I've done this
correctly.
I've been using it now for a few weeks without any obvious
problems. But I'm passing it
on so that others can review the code and test it out on their
systems. I developed the
patch when I was running Python 2.5.2, but to my knowledge I don't use
any Python 2.5-specific
code. Now I'm using the patch with Python 2.6.
Although I said "without any obvious problems," let me confess that
I'm
seeing offlineimap regularly choke when I do things like this: start
up
my offlineimap-wrapped copy of mutt, wait a while, put the machine to
sleep (not sure if offlineimap is active in the background or idling),
move to a different spot, wake the machine up again and it acquires a
new network, sometimes a wired network instead of wifi. Offlineimap
doesn't like that so much. I don't yet have any reason to think the
problems here come from my patches. But I'm just acknowledging them,
so
that if others are able to use offlineimap without any difficulty in
situations like I described, then maybe the fault is with my patches.
From Jim Pryor
The first, "cleanup.patch", cleans up a few spots that tend to throw
exceptions for me as offlineimap is exiting from a KeyboardInterrupt.
Frankly, the original code doesn't even make much sense, and
moreover it's not forward compatible with python 2.6, and
furthermore:
DeprecationWarning: socket.ssl() is deprecated.
So, this commit is just a temporary fix.
Signed-off-by: Michael Witten <mfwitten@mit.edu>
module threading should be taken out back and shot.
Condition.wait() is a busywait loop that has negative implications for
battery consumption on laptops.
Queue.get() in blocking mode blocks SIGINT from being delivered.
Argh, argh, argh.
Closes: #493801.
This should improve power-management abilities some more
The catch is that we can't wait any longer for the kathread to
terminate. We were waiting for this in some cases. This is probably
not a big deal.
fixes deb#434074
fixes#66
This patch adds sslclientcert and sslclientkey configuration
options which are passed through to imaplib in order to allow
the use of client certificates for authentication.
Tue Nov 13 14:44:17 CST 2007 Mark Hymers <mhy@debian.org>
Noted thie code:
statusfolder =
statusrepos.getfolder(remotefolder.getvisiblename().\
replace(remoterepos.getsep(),
statusrepos.getsep()))
in accounts.py. Should have been using the sep of the LocalStatus all
along.
refs deb#479798, #68
fixes#20
04/27/2008 09:34 AM - Vincent Beffara
* File darwin.patch added
OK, I finally installed an IMAPS server on my iMac, so I could test a
little further. For some reason, fixing the read() method in
imaplibutil.py did not seem to work (it hung on connecting to the
server) - however, modifying the file imapserver.py similarly to the
non-SSL case fixed the crash.
I also reduced the chunk size to 100k instead of 1M, as 1M seemed to
still trigger the memory error in some cases. Ah, and I added a
platform test, so that the patch does essentially nothing on
non-Darwin machines ...
So, still no guarantee, but the attached patch works for me. Any
comments ?
(If noone here screams in horror at my code, I will include the patch
into the Fink package and see what happens there.)
I created new IMAP folders on my server. In some moment I found offlineimap
crashed. The reason were empty LocalStatus files. From looking at the code I
have no explanation how those files came into existence.
* John Goerzen (jgoerzen@complete.org) wrote:
> tages 359213 help
> thanks
>
> Hi folks,
>
> Unfortunately, I lack both the expertise to add Kerberos
> authentication and a way to test this. A patch would be very welcome
> :-)
Well it was a bit unclear but there's a patch for offlineimap attached
to Guido's message:
http://bugs.debian.org/cgi-bin/bugreport.cgi?msg=10;filename=support-GSSAPI-via-pykerberos.diff;att=1;bug=359213
I've tried it out and it works great! Except that if the Kerberos
layer throws an exception it wouldn't fail over to plain
authentication properly. Attached is a slightly reworked patch that I
tested it in the following situations:
1. python-kerberos uninstalled, with kerberos credentials.
Prompted for password authentication as expected.
2. python-kerberos installed, with kerberos credentials.
Keberos authentication was successful and my mail was fetched
without password prompting. Yeehaw!
3. python-kerberos installed, with no kerberos credentials.
Prompted for password authentication as expected.
I think those are all the interesting situations. So I think this is
ready to go in, with a Suggest on python-kerberos (>=
1.0+mk080218-1).
--
Eric Dorland <eric@kuroneko.ca>
ICQ: #61138586, Jabber: hooty@jabber.com
refs deb#469598
Bug report received in Debian. User is having occasional trouble with Gmail
driver crashing, indicates problem may have started after switching to Gmail.
Gmail driver merged to tree in 81b86fb74 on 2008-01-03 and recently released
in beta tarballs.
BT shows:
File "/var/lib/python-support/python2.4/offlineimap/folder/Gmail.py", line 102, in processmessagesflags
attributehash = imaputil.flags2hash(imaputil.imapsplit(result)[1])
File "/var/lib/python-support/python2.4/offlineimap/imaputil.py", line 88, in imapsplit
for i in range(len(imapstring)):
TypeError: len() of unsized object
imap debug log shows:
imap: 29:58.16 > BEAL75 UID STORE 4887 +FLAGS (\Deleted)
imap: 29:58.47 < BEAL75 OK Success
imap: 29:58.47 matched r'(?P<tag>BEAL\d+) (?P<type>[A-Z]+) (?P<data>.*)' => ('BEAL75', 'OK', 'Success')
imap: imapsplit() called with input: None
imap: imapsplit() got a non-string input; working around.
looking at code for Gmail.py processmessagesflags, comments from Ricardo
indicate it was copied from the same function in folder/IMAP.py.
However, folder/IMAP.py has checks for this, added 2002-07-12 in
5342dacc & 817a10ce. Suspect that Gmail author believed those checks
superfluous for Gmail.
Copied checks from folder/IMAP.py to folder/Gmail.py.
This reverts commit 71a76d9a61.
Zak Smith reported a problem at:
self.processmessagesflags('+', uidlist, flags)
File "/usr/lib/python2.5/site-packages/offlineimap/folder/IMAP.py",
line 372, in processmessagesflags
myrights = imapobj.myrights(self.getfullname())[1][0].split()[1]
IndexError: list index out of range
Conflicts:
offlineimap/folder/IMAP.py
Added WrappedIMAP4_SSL class to help fix up performance of SSL
Standard imaplib.py is really bad with this, since it reads one
character at a time.
Reported by Aaron Kaplan at
http://lists.complete.org/offlineimap@complete.org/2008/01/msg00012.html.gz
He wrote:
I just noticed that the version of offlineimap I've been using
(3.99.17) is well over four years old. How time flies. I haven't
had any problems with it, but out of curiosity I decided to pull in
5.99.2 from the fedora repository. It turns out to take
consistently over twice as long as the old version to sync the same
account. Is this expected?
He tracked it down at
http://lists.complete.org/offlineimap@complete.org/2008/02/msg00012.html.gz
The following changeset is the one responsible for the difference in
speed I was noticing between the imaplib.py that was packaged with
older versions of offlineimap and the one that comes with python:
* /offlineimap/head: changeset 169
More optimizations -- this time fix readline() to not work
character-by-character!
closes#22
from pistore in OfflineIMAP #22:
When an IMAP flag update is performed for multiple messages, some IMAP
servers (e.g. Exchange) return the UID attribute only for some of the
FETCH untagged responses, as shown in the following log:
21:19.04 > DCKF8 UID STORE 66050,50613,52164,40043,40055,25874 +FLAGS
(\Deleted)
21:19.36 < * 35 FETCH (FLAGS (\Seen \Deleted) UID 25874)
21:19.36 < * 321 FETCH (FLAGS (\Seen \Deleted))
21:19.57 < * 322 FETCH (FLAGS (\Seen \Deleted))
21:19.57 < * 560 FETCH (FLAGS (\Seen \Deleted))
21:19.57 < * 581 FETCH (FLAGS (\Seen \Deleted) UID 52164)
21:19.62 < * 1022 FETCH (FLAGS (\Seen \Deleted))
21:19.62 < DCKF8 OK STORE completed.
Function IMAPFolder.processmessagesflags is able to manage the servers
which return the UID and the servers which do not return it, but is
not able to deal with the mixed behavior shown above.
The problem is that the fragment of function
IMAPFolder.processmessagesflags that handles the responses with UID
attribute uses variable flags to store the list of flags of the
message in the IMAP format ("flags = attributehashFLAGS?"), while the
fragment that handles the responses without UID expects variable
"flags" to contain the list of modified flags passed to the function
in Maildir format ("self.messagelist[uid]flags?.append(flag)").
As a consequence, the wrong list of flags is used for the messages
without UID, leading to the addition of "strange" flags to the Maildir
messages:
Syncing messages IMAP[INBOX] -> Maildir[.]
Adding flags to 4 messages on Maildir[.]
Adding flags e to 4 messages on Maildir[.]
Adding flags d to 4 messages on Maildir[.]
Adding flags ) to 4 messages on Maildir[.]
Adding flags ( to 4 messages on Maildir[.]
Adding flags l to 4 messages on Maildir[.]
Adding flags n to 4 messages on Maildir[.]
Adding flags t to 4 messages on Maildir[.]
Adding flags \ to 4 messages on Maildir[.]
Adding flags D to 4 messages on Maildir[.]
Deleting flags T to 4 messages on Maildir[.]
Adding flags to 4 messages on LocalStatus[.]
Adding flags e to 4 messages on LocalStatus[.]
Adding flags d to 4 messages on LocalStatus[.]
Adding flags ) to 4 messages on LocalStatus[.]
Adding flags ( to 4 messages on LocalStatus[.]
Adding flags l to 4 messages on LocalStatus[.]
Adding flags n to 4 messages on LocalStatus[.]
Adding flags t to 4 messages on LocalStatus[.]
Adding flags \ to 4 messages on LocalStatus[.]
Adding flags D to 4 messages on LocalStatus[.]
Deleting flags T to 4 messages on LocalStatus[.]
Fix: use a different variable to store IMAP flags when managing
messages corresponding to responses with UID attribute, e.g.:
*** IMAP.py.orig Wed Aug 22 18:23:17 2007
--- IMAP.py Wed Aug 22 18:22:38 2007
*************** class IMAPFolder(BaseFolder):
*** 340,348 ****
if not ('UID' in attributehash and 'FLAGS' in
attributehash):
# Compensate for servers that don't return a UID
attribute.
continue
! flags = attributehash['FLAGS']
uid = long(attributehash['UID'])
! self.messagelist[uid]['flags'] =
imaputil.flagsimap2maildir(flags)
try:
needupdate.remove(uid)
except ValueError: # Let it slide if it's not
in the list
--- 340,348 ----
if not ('UID' in attributehash and 'FLAGS' in
attributehash):
# Compensate for servers that don't return a UID
attribute.
continue
! lflags = attributehash['FLAGS']
uid = long(attributehash['UID'])
! self.messagelist[uid]['flags'] =
imaputil.flagsimap2maildir(lflags)
try:
needupdate.remove(uid)
except ValueError: # Let it slide if it's not
in the list
02/03/08 14:04:35 changed by js
* attachment flags-fix.patch added.
Delete 02/03/08 14:05:24 changed by js
Unfortunately I have to fetch some of my mail from an Exchange server
(Microsoft Exchange Server 2003 IMAP4rev1 server version 6.5.7638.1)
and I can confirm that the analysis of the problem is correct, and the
patch given here fixes the problem.
Looking at the code of the processmessagesflags() method I think it
generally is a bug that the "flags" parameter is reused as a local
variable, since the final "for uid in needupdate:" loop needs the
original value of "flags". This only worked by accident.
I'm attaching a unidiff version of the patch which applies cleanly
against Debian unstable's offlineimap 5.99.4.
New repository/folder classes to support "real deletion" of messages
thorugh Gmail's IMAP interface: to really delete a message in Gmail,
one has to move it to the Trash folder, rather than EXPUNGE it.
This patch maneuvers around python imaplib's mysterious read-only detection
algorithm and correctly calls the UI's deletetoreadonly(), when trying to
delete/expunge in a mailbox without having the necessary rights.
This involves several changes at different places:
- syncfoldersto() takes statusfolder as an argument, and returns the
list of new folders and the list of folders that should be ingnored,
typically those that were deleted. Warns the user about folders that
are present only on one side and are not synced.
- syncfoldersto() is called both ways, and on folder creation
forgetfolders() is used to rebuild the list and take the new creation
into account. Probably not the most efficient, since it involves
talking to the IMAP server again, but it will rarely be used anyway.
- Locally created folders are treated separately in the synchronization,
namely the local messages are uploaded and then the normal sync still
occurs. If the same folder is created on both sides and contains
messages on both sides, a two-way sync occurs.
fixes deb#439384
From: martin f krafft
Subject: race condition in Maildir writing
The offlineimap Maildir code checks for file existence and then
opens a file. That's open to a race condition. It's better to open
the file and fail if it already exists. The following patch does
this. It catches OSError 17 (file exists) and re-raises all others.
I'll leave it up to you to decide whether this is appropriate.
This involves several changes at different places:
- syncfoldersto() takes statusfolder as an argument, and returns the
list of new folders and the list of folders that should be ingnored,
typically those that were deleted. Warns the user about folders that
are present only on one side and are not synced.
- syncfoldersto() is called both ways, and on folder creation
forgetfolders() is used to rebuild the list and take the new creation
into account. Probably not the most efficient, since it involves
talking to the IMAP server again, but it will rarely be used anyway.
- Locally created folders are treated separately in the synchronization,
namely the local messages are uploaded and then the normal sync still
occurs. If the same folder is created on both sides and contains
messages on both sides, a two-way sync occurs.
From: "Mark A. Hershberger"
https://bugs.launchpad.net/ubuntu/+source/offlineimap/+bug/96710
the locked() method isn't implemented for non-interactive UIs, so
exceptions are thrown on cron jobs. Ubuntu's new apport catches these
and ? well, you get the idea.
patch provided.
fixes deb#433732
Date: Sun, 30 Sep 2007 13:54:56 -0400
From: Daniel Jacobowitz <drow@false.org>
To: offlineimap@complete.org
Subject: Assorted patches
Here's the result of a lazy Sunday hacking on offlineimap. Sorry for
not breaking this into multiple patches. They're mostly logically
independent so just ask if that would make a difference.
First, a new -q (quick) option. The quick option means to only update
folders that seem to have had significant changes. For Maildir, any
change to any message UID or flags is significant, because checking
the flags doesn't add a significant cost. For IMAP, only a change to
the total number of messages or a change in the UID of the most recent
message is significant. This should catch everything except for
flags changes.
The difference in bandwidth is astonishing: a quick sync takes 80K
instead of 5.3MB, and 28 seconds instead of 90.
There's a configuration variable that lets you say every tenth sync
should update flags, but let all the intervening ones be lighter.
Second, a fix to the UID validity problems many people have been
reporting with Courier. As discussed in Debian bug #433732, I changed
the UID validity check to use SELECT unless the server complains that
the folder is read-only. This avoids the Courier bug (see the Debian
log for more details). This won't fix existing validity errors, you
need to remove the local status and validity files by hand and resync.
Third, some speedups in Maildir checking. It's still pretty slow
due to a combination of poor performance in os.listdir (never reads
more than 4K of directory entries at a time) and some semaphore that
leads to lots of futex wake operations, but at least this saves
20% or so of the CPU time running offlineimap on a single folder:
Time with quick refresh and md5 in loop: 4.75s user 0.46s system 12%
cpu 41.751 total
Time with quick refresh and md5 out of loop: 4.38s user 0.50s system
14% cpu 34.799 total
Time using string compare to check folder: 4.11s user 0.47s system 13%
cpu 34.788 total
And fourth, some display fixes for Curses.Blinkenlights. I made
warnings more visible, made the new quick sync message cyan, and
made all not explicitly colored messages grey. That last one was
really bugging me. Any time OfflineIMAP printed a warning in
this UI, it had even odds of coming out black on black!
Anyway, I hope these are useful. I'm happy to revise them if you see
a problem.
--
Daniel Jacobowitz
CodeSourcery
patch from Mike Gerber
Two times today I have found my offlineimap to have died with this same
situation. It appears as if certain types of messages (both spam in my
situation), cause offlineimap to choke. When it does it cannot proceed.
This means that when I run offlineimap, it pulls in messages from some
folders, then it hits the folder with the bad message and dies, leaving
undownloaded mail on the server. The only fix to this problem is to find
the problem message on the server and remove it by hand. This isn't such
a huge deal for me, since I run the server, but other people have to
come to me to ask me to delete these messages, and until I do they
cannot download their email.
I have captured the output by running script during one of these
incidents, this has been attached. Additionally, I have also attach the
problematic message.
The patch seems to work for me, might need some Python wizard and better
testing, though.
fixes deb#396443
r[1] is a list. In case it contains more than one 'str' they are concatenated
using '. '. In processmessagesflags the join is tested, for savemessagesflags I
assume that it is also needed.
I have tested this and Dovecot no longer beats offlineimap
to the punch. (-:
I achieved that by keeping the renames in tmp/ until it finally does
one last rename in new/ or cur/.
fsync the Maildir file, its final directory when writing a new message.
fsync the localstatus file and its final directory when writing the
local status cache.
This should reduce duplication in the event of hardware trouble.
fixes#8
see thread at http://lists.complete.org/offlineimap@complete.org/2007/03/threads.html.gz
* Reduced the number of parameters passed to ui.validityproblem() because they were all just method-calls to the folder object, which is already passed as the first parameter (reduction of unnecessary complexity).
* Improved the diagnostic message for an 'UID validity problem' by including the name of the repository in which the folder resides; previously it was not possible to determine from the diagnostic alone on which side the problem was.
* Reduced the number of parameters passed to ui.validityproblem() because they were all just method-calls to the folder object, which is already passed as the first parameter (reduction of unnecessary complexity).
From: Peter Colberg
Hello,
using offlineimap with the preauthtunnel option to start a remote
IMAP daemon via ssh, a zombie process is left behind during the
autorefresh sleep period if not holding the connection open.
Above behaviour is a result of using os.popen2 to spawn the tunnel
process, which makes it impossible waiting for the child process
to terminate when shutting down the tunnel.
The patch included below fixes the issue by employing the Popen
class from the subprocess module, which seems to be the preferred
way to spawn processes and connect to their pipes in any case (at
least since python version 2.4.4, which fixes a memory leak in the
subprocess module).
Regards,
Peter
fixes deb#410730
From: Mark Brown <broonie@sirena.org.uk>
Currently offlineimap will attempt to connect to the first address
returned by addrinfo() for the remote system and will fail if that fails
even if another result would have worked. This is particularly common
when the remote system supports both IPv4 and IPv6 - a laptop may in
some environments have no routable IPv6 connectivity so if the IPv6
address is returned first the connect will fail even though IPv4 would
have worked.
This is actually a bug in imaplib, a copy of which is included in
offlineimap. This patch fixes the problem by looping over all the
results returned by getaddrinfo(). Unfortunately it mangles the error
reporting slightly since I couldn't work out how to raise an appropriate
exception, though given that that that was a Python backtrace there was
work to do there anyway.
Note that I have only tested the SSL case.
It looks like I accidentally recorded the wrong version of Curses.py --
originally this code was there, but I moved it over to UIBase so it would
cover the TTY UI also.
From Ben Kibbey
hello,
Attached is a patch to enable evaluation of account credentials with the
remotehosteval, remoteusereval and remotepasseval configuration options.
I needed this because rather than change all my other programs
configuration settings when I change, say a password, I store them in a
file. So I call a function in pythonfile which parses the credential
file and returns the wanted info. Not really very well tested, but not
complex either. Offlineimap is great, thanks.
From: Ben Kibbey
Subject: Re: Removed restoratime from OfflineIMAP
On Wed, May 03, 2006 at 10:08:35PM -0500, John Goerzen wrote:
> Hi Ben,
>
> Thanks for your restoreatime patch.
>
> However, I have received this bug report:
>
> http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=365933
>
> After looking at the problem, here's what's going on.
>
> The person is using IMAP as the local repository as well.
>
> You really need to move the atime save and restore code from accounts.py
> into the repository/Maildir.py. Then, for any new call you add to the
> Maildir repository (that will be called from outside Maildir.py), you
> need to add a corresponding default function to repository/Base.py, and
> also make sure that on folders (such as IMAP) where atime restoration
> makes no sense, no error is generated.
>
> Let me know if that doesn't make sense to you. If you get it fixed, I'd
> be happy to re-apply it to a future version of OfflineIMAP.
>
> -- John Goerzen
>
Attached is a new diff that should work though not really tested
(v4.0.14). In repository/Base.py restore_atime() will call
self.restore_folder_atimes() only if the folder type is Maildir. Let me
know if it has any more problems.
The attached patch adds syncing the INTERNALDATE of IMAP folders with
the mtime of messages in maildir folders.
I want this to happen, because I'm running a dovecot over the maildirs
synced by offlineimap, and that uses the mtime as the INTERNALDATE.
When using mutt to view messages I generally sort based on the received
date, which for IMAP folders is the INTERNALDATE.
Since this is the first real coding I've done in Python the patch may
need to be cleaned up some, but it's working pretty well for me. I've
added new messages to each side, and the received date has been
preserved going both ways.
From: Ben Kibbey <bjk@luxsci.net>
Attached is a patch to restore the atime of Maildir folders after
syncing. It can be enabled via the 'restoreatime' boolean in the
configuration file. I needed this because offlineimap is run after a
fetchmail and my mail checker breaks.
Patch from Nikita V. Youshchenko
From: "Nikita V. Youshchenko"
To: Debian Bug Tracking System
Subject: offlineimap: exception on mail with broken headers (+fix)
Date: Wed, 24 Aug 2005 13:41:08 +0400
Package: offlineimap
Version: 4.0.10
Severity: normal
Tags: patch
Recently I've got an exception (see below) while using offlineimap.
Exception was probably caused by invalid Date header of (likely spam)
message:
Date: Sat, 20 Aug 2005 4294967295:43:18 -0700
From: "Nikita V. Youshchenko"
I trued to use offlineimap and found that while being quite fast on
small folders, it takes up to several minutes (of 100% busy CPU and
almost no network traffic) to sync a folder with 2000+ messages.
While looking into the code, I found why this happens.
In folder/Base.py, in method BaseFolder.syncmessagesto_copy(),
dest.getmessagelist() is called inside a loop, while being a loop
invariant. Similar thing happens in BaseFolder.syncmessagesto_delete()
for self.getmessagelist().
This causes quadratic complexity over folder size.
Moving these calls out of loops make large folder sync fast (several
seconds instead of several minutes for folder with 2000 messages on
700MHz P3).
