The example illustrations were slightly cryptic;
modify them to be more obvious.
Fix case #2 (message starts with two line breaks)
where additional line break was shown and coded.
Signed-off-by: Eygene Ryabinkin <rea@codelabs.ru>
The parameter's value is a string representing the linebreak,
and can sometimes contain just '\n', in which case naming it
crlf is slightly misleading.
Signed-off-by: Eygene Ryabinkin <rea@codelabs.ru>
For cases like
http://article.gmane.org/gmane.mail.imap.offlineimap.general/6468
it is beneficial to see that folder name was translated and the result
of this translation on a single line: having log like
{{{
Folder Boring/Wreck [acc: tmarble@info9.net]:
Syncing Boring/Breck: Gmail -> Maildir
}}}
with translated name on the "Folder" line and original one on the
"Syncing" line isn't very intuitive.
Signed-off-by: Eygene Ryabinkin <rea@codelabs.ru>
It is always good to see which version we're talking about, so I had
added explicit marker for -devel, -release, -rcX and other states of
the OfflineIMAP.
Signed-off-by: Eygene Ryabinkin <rea@codelabs.ru>
For servers without UIDPLUS we are inserting additional header
just after transformation '\n' -> CRLF was done. addmessageheaders()
was written to work with just '\n' as the separator, so X-OfflineIMAP
header wasn't preceeded by the CRLF, but just by '\n'.
Signed-off-by: Eygene Ryabinkin <rea@codelabs.ru>
private methods prevent them from being overriden on derived classes. In
GmailFolder we need to override copymessageto, so it can't be private.
Before this commit, copymessageto was made private in Base but not in
GmailFolder. The end result was that labels were not set when copying
the message content, and always needed to be set on the label copying
pass.
Pointyhat-to: Eygene Ryabinkin
Signed-off-by: Eygene Ryabinkin <rea@codelabs.ru>
... and not self.filterheaders. With the current code this change
is no-op (since self.filterheaders is always passed as header_list),
but it is a bug in general.
Signed-off-by: Eygene Ryabinkin <rea@codelabs.ru>
If when we request a LocalStatus folder, the folder has to be created,
we look whether the other backend has data, and if it does we migrate
it to the new backend.
The old backend data is left untouched, so that if you change back say
from sqlite to plaintext, the older data is still there. That should
not lead to data loss, only a slower sync while the status folder gets
updated.
Signed-off-by: Eygene Ryabinkin <rea@codelabs.ru>
* Do not inherit LocalStatusSQLiteFolder class from the plaintext
one.
* Use some functions already in BaseFolder in both, plaintext and
sqlite classes.
* Add a saveall method. The idea is that saveall dumps the entire
messagelist to disk, while save only commits the uncommited
changes. Right now, save is noop for sqlite, and equivalent to
saveall for plaintext, but it enables to be more clever on when we
commit to disk in the future.
Signed-off-by: Eygene Ryabinkin <rea@codelabs.ru>
* Implements Status Folder format v2, with a mechanism to upgrade an
old statusfolder.
* Do not warn about Gmail and GmailMaildir needing sqlite backend
anymore.
* Clean repository.LocalStatus reusing some code from
folder.LocalStatus.
* Change field separator in the plaintext file from ':' to '|'. Now
the local status stores gmail labels. If they contain field
separator character (formerly ':'), they get messed up. The new
character '|' is less likely to appear in a label.
Signed-off-by: Eygene Ryabinkin <rea@codelabs.ru>
Format headers X-Label and Keywords as a space separated list and all
other ones as comma-separated entities. This makes OfflineIMAP label
handling to be compatible with some user agents that recognise these
headers.
Signed-off-by: Eygene Ryabinkin <rea@codelabs.ru>
When synclabels config flag is set to "yes" for the GMail repo,
offlineimap fetches the message labels along with the messages, and
embeds them into the body under the header X-Keywords (or whatever
'labelsheader' was set to), as a comma separated list.
It also adds an extra pass to savemessageto, that performs label
synchronization on existing messages from GMail to local, the same way
it is done with flags.
We also introduce GmailMaildir repository that adds functionality to
change message labels. It keeps track of messages modification time,
so one can quickly detect when the labels may have changed.
Signed-off-by: Eygene Ryabinkin <rea@codelabs.ru>
In preparation for GMail label sync, we had split our some functionality
that will be needed further into their own functions. This also permitted
the code to look more compact and concise.
Signed-off-by: Eygene Ryabinkin <rea@codelabs.ru>
When filterheaders is set to a comma-separated list of headers,
OfflineIMAP removes those headers from messages before uploading them
to the server.
Signed-off-by: Eygene Ryabinkin <rea@codelabs.ru>
Since we just do multiple passes for saving the message without
actually modifying its content (apart from header insertion that
is CRLF-clean), we can change line ends to the proper CRLF just
once.
And we can also get message's date only once too.
Signed-off-by: Eygene Ryabinkin <rea@codelabs.ru>
Added the configuration setting usecompression for the IMAP repositories.
When enabled, the data from and to the IMAP server is compressed.
Signed-off-by: Eygene Ryabinkin <rea@codelabs.ru>
Make external API of class/module to be smaller, explicitely mark
all internal functions. Also annotate methods that are implemented
as the part of the parent class interface.
Signed-off-by: Eygene Ryabinkin <rea@codelabs.ru>
Allow people who want folder filtering to depend on the external
conditions or to make it dynamic for other reasons, to do what
they want.
New repository configuration knob 'dynamic_folderfilter' was
introduced; it defaults to 'False' that matches historical behaviour.
GitHub: #73
Signed-off-by: Eygene Ryabinkin <rea@codelabs.ru>
This commit fixes the case when we're invoking releaseconnection()
for a given imapobj twice.
This bug manifests itself as
{{{
ValueError: list.remove(x): x not in list
File "[...]/offlineimap/folder/IMAP.py", line 615, in savemessage
self.imapserver.releaseconnection(imapobj)
File "[...]/offlineimap/imapserver.py", line 130, in releaseconnection
self.assignedconnections.remove(connection)
}}}
Signed-off-by: Eygene Ryabinkin <rea@codelabs.ru>
When imaputil was parsing quoted strings, it treated "abcd\\"
as incomplete quoted string having escaped quote, rather than
properly-quoted string having escaped backslash.
GitHub issue: https://github.com/OfflineIMAP/offlineimap/issues/53
Signed-off-by: Eygene Ryabinkin <rea@codelabs.ru>
2.36 it includes support for SSL version override that was integrated
into our code before, no other changes.
Signed-off-by: Eygene Ryabinkin <rea@codelabs.ru>
- Fix for Gmail sending a BYE response after reading >100 messages
in a session.
- Includes fix for GitHub#15: patch was accepted upstream.
Signed-off-by: Eygene Ryabinkin <rea@codelabs.ru>
Second argument is exception traceback, not the message; without this
tracebacks like mentioned in
http://permalink.gmane.org/gmane.mail.imap.offlineimap.general/5712
were happening when this exception handling block was hit.
Signed-off-by: Eygene Ryabinkin <rea@codelabs.ru>
This greatly simplifies developer's life and will, possibly, allow
users familiar with Python to debug and fix the problems by
themselves.
We, possibly, should not give tracebacks for the problems like
"can't open connection", but this is up to the caller of this
routine not to provide traceback in this case.
Signed-off-by: Eygene Ryabinkin <rea@codelabs.ru>
self._expecting_data was used both as the expected data length and the
flag that we expect some data. This obviously fails when advertized
data length is zero, so self._expecting_data_len was introduced to
hold the length of the expected data and self._expecting_data was left
as the flag that we expect the data to come.
GitHub issue: https://github.com/OfflineIMAP/offlineimap/issues/15
Signed-off-by: Eygene Ryabinkin <rea@codelabs.ru>
It is called localfolders and holds expanded name for the same
variable for the local repository of the account that is being
processed.
GitHub issue: https://github.com/OfflineIMAP/offlineimap/issues/21
Signed-off-by: Eygene Ryabinkin <rea@codelabs.ru>
Bring the description in the template offlineimap.conf in sync to the
actual implementation: pass folder names to the sorting function, not
the offlineimap.folder.IMAP.IMAPFolder objects themselves.
GitHub issue: https://github.com/OfflineIMAP/offlineimap/issues/27
Signed-off-by: Eygene Ryabinkin <rea@codelabs.ru>
Global or per-repository option utime_from_message tells OfflineIMAP
to set file modification time of messages pushed from one repository
to another basing on the message's "Date" header.
This is useful if you are doing some processing/finding on your
Maildir (for example, finding messages older than 3 months),
without parsing each file/message content.
From: Cyril RUSSO <boite.pour.spam@gmail.com>
Signed-off-by: Eygene Ryabinkin <rea@codelabs.ru>
Added configuration option "auth_mechanisms" to the config file:
it is a list of mechanisms that will be tried in the specified order.
Author: Andreas Mack <andreas.mack@konsec.com>
Signed-off-by: Eygene Ryabinkin <rea@codelabs.ru>
It's nice to set up an ssh tunnel command which forwards an IMAP tcp
port inside an encrypted session, e.g. with ssh's "-W" flag. In this
case the tunnelled connection still requires authentication inside
IMAP session, because this is transport-only tunnel that substitutes
normal TCP/SSL connection.
New directive, 'transporttunnel' was added: it specifies the command
that will create the tunnel. Only one type of tunnel must be
specified for a single repository: we can't have both preauthenticated
and transport-type tunnels, they won't chain together.
From: Steve Purcell <steve@sanityinc.com>
Signed-off-by: Eygene Ryabinkin <rea@codelabs.ru>
- this method isn't as deprecated as IMAP LOGIN;
- it allows to keep hashed passwords on the server side;
- it has the ability to specify that the remote identity
is different from authenticating username, so it even
can be useful in some cases (e.g., migrated mailboxes);
configuration variable "remote_identity" was introduced
to leverage this functionality.
From: Andreas Mack <andreas.mack@konsec.com>
Signed-off-by: Eygene Ryabinkin <rea@codelabs.ru>
- created helper routine that will do authentication;
- routine tries each method in turn, first successful
one terminates it: makes things easier to read
and handle;
- renamed plainauth() inside offlineimap/imapserver.py
to loginauth(): the function does IMAP LOGIN authentication
and there is PLAIN SASL method, so previous name was
a bit misleading;
- slightly improved error reporting: all exceptions during
authentication will be reported at the end of the run;
- now loginauth() is never called if LOGINDISABLED is advertized
by the server; it used to be invoked unconditionally when
CRAM-MD5 fails, but we should respect server's opinion on
how to handle its users.
Signed-off-by: Eygene Ryabinkin <rea@codelabs.ru>
IMAP servers can return `NO` responses to the `APPEND` command,
e.g. here's an example response from Groupwise's IMAP server:
NO APPEND The 1500 MB storage limit has been exceeded.
In this case, savemessage() should abort the repository sync rather
than returning UID 0 which would cause the local copy of the message
being saved to get irreversibly deleted.
Signed-off-by: Adam Spiers <offlineimap@adamspiers.org>
Signed-off-by: Eygene Ryabinkin <rea@codelabs.ru>
mutt-sidebar and, probably, other MUA show mailboxes in the order
they are listed in the file written by mbnames. Therefore, to allow
customization of the order with which mailboxes are listed, introduce
the new 'sort_keyfunc' directive in the [mbnames] section.
'sort_keyfunc' must be a function that will be called once for each
mailbox. It must accept the only argument -- a dict with 2 items,
'accountname' and 'foldername', and should return an object that
will be used as the sorting key for each mailbox.
Default key function returns (d['accountname'], d['foldername']),
thus sorting by account name and then by the folder name.
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Eygene Ryabinkin <rea@codelabs.ru>
Make IDLE syncs be equal to the regular synchronisations
in respect to pre-sync and post-sync hooks.
From: mxgr7 <maxgerer@gmail.com>
Signed-off-by: Eygene Ryabinkin <rea@codelabs.ru>
Run the locked code under 'with': this guarantees that lock
will be released in any case.
This modification also avoids the case when our thread wasn't running
locked when exception was caught, another thread got the lock, our
code checked it via self.connectionlock.locked() and errorneously
released the lock thinking that is was running locked.
Signed-off-by: Eygene Ryabinkin <rea@codelabs.ru>
They are redundant in all pruned cases and sometimes even create some
problems, e.g., when one tries to jump through paragraphs in vi.
Signed-off-by: Eygene Ryabinkin <rea@codelabs.ru>
We now allow setting the SSL version used when connecting to IMAPS servers, and
do so via the `ssl_version` configuration option. We default to the current
practice (letting python's "ssl" library automatically detect the correct
version). There are however rare cases where one must specify the version to
use.
Signed-off-by: Ryan Kavanagh <rak@debian.org>
This eases testing of option values inside the code. This instance
is implemented as the read-only copy of the obtained 'options' object,
so callers won't be able to modify its contents.
Signed-off-by: Eygene Ryabinkin <rea@codelabs.ru>
The problem lies in the fact that offlineimap.folder.Base's method
syncmessagesto_copy() uses threaded code everytime it is suggested by
the derived class's suggeststhreads() (currently, only IMAP does this
suggestion), but offlineimap/init.py will not spawn the
exitnotifymonitorloop() from offlineimap.threadutil.
The root cause is that ExitNotifyThread-derived threads need
offlineimap.threadutil's exitnotifymonitorloop() to be running the
cleaner for the exitthreads Queue(), because it fills the queue via
the run() method from this class: it wants to put() itself to the
Queue on exit, so when no exitnotifymonitorloop() is running, the
queue will fill up. And if this thread is an instance of
InstanceLimitedThread that hits the limit on the number of threads,
then it will hold the instancelimitedsems[] semaphore will prevent
other InstanceLimitedThread()s of the same name to pass its start()
method.
The fix is to avoid using threaded code if we're running
single-threaded.
Signed-off-by: Eygene Ryabinkin <rea@codelabs.ru>
Obtained-from: X-Ryl669 <boite.pour.spam@gmail.com>
This is handy when we're debugging the thread locks: we can try to
understand which thread does what and how it was called.
Signed-off-by: Eygene Ryabinkin <rea@codelabs.ru>
offlineimap has several frontends that encourage running it from a
terminal under an X session. When X session closes for a system
shutdown, the terminals exit, after sending SIGHUP to their children.
Previously SIGHUP was treated to be equivalent to SIGUSR1, i.e. wake
up and sync all accounts. This causes delays during shutdown.
According to Wikipedia [0], SIGHUP has been repurposed from a
historical meaning to one of:
* re-read configuration files, or reinitialize (e.g. Apache, sendmail)
* controlling pseudo or virtual terminal has been closed
I believe second meaning is more appropriate for offlineimap, and
hence this patch makes SIGHUP to be handled in the same way SIGTERM
and SIGINT are handled.
[0] http://en.wikipedia.org/wiki/SIGHUP
Debian-Bug: http://bugs.debian.org/670120
Reported-By: Steve Langasek <steve.langasek@canonical.com>
Signed-off-by: Dmitrijs Ledkovs <xnox@debian.org>
Signed-off-by: Eygene Ryabinkin <rea@codelabs.ru>
Fix imapfolder.getmessageinternaldate misparsing the Date:
header from emails due to a bug or surprising behaviour by
email.utils.parsedate. This is because email.utils.parsedate's
return value contains the unadjusted hour value from the string
parsed but does not include information about the time zone in
which it is specified. For example (Python 2.7.3):
$ python -c "import email.utils;
print email.utils.parsedate('Mon, 20 Nov 1995 19:12:08 -0500')"
(1995, 11, 20, 19, 12, 8, 0, 1, -1)
(the -1 is the isdst field); the -0500 time zone is completely
ignored, so e.g. the same input with time "19:12:08 +0300" has
the same result. When passed to time.struct_time as allowed per
the parsedate documentation, this time is interpreted in GMT and
thus deviates from the correct value by the timezone offset
(in this example, -5 hours).
I consider this a bug in email.utils.parsedate: In my opinion,
since the return value of the parsetime doesn't include a timezone,
it should be expressed in terms of UTC rather than in terms of the
time zone from the Date header; the existence of
email.utils.parsedate_tz, to which I've switched, indicates that
maybe the authors were aware of this problem.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Previous commit e7ca5b25cb combined
checks for filtered folders in one place. However, it turns out there
was a reason to have them separate. getfolder() on a non-existent Maildir
fails and there might not be an equivalent local Maildir folder for a
filtered out IMAP folder.
Fix this by first checking if the remote folder should be filtered, and
only then retrieving the local folder (which should exist then).
This bug was found by our test suite!
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
the LocalStatus._folders cache was changed to be a dict that can be
searched for names. One instance were _folders was set to "None" was
accidentally left over. Fix this.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
commit e94642bb4d centralized folder filtering by using the
repository.should_sync_folder() function. Therefore there is no need
to check for folderfilter in the Maildir backend separately.
Origina patch by Dave, split into 3 by Sebastian
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Rather than later when retrieving them by IMAP, we determine the
"sync_this" value of a folder on Folder() initialization.
This also fixes a bug where folder structure was not propagated when
a folder was filtered out but included in the folderincludes list.
Patch by Dave, split and modified slightly by Sebastian
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
- Factor out the code to find a local folder given a remote folder
Patch by Dave, split and modified by Sebastian.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
If we ask twice for a LocalStatusFolder via getfolder(), we would
get a newly created instance each time. This can lead to problems,
as e.g. write locks protecting files only work within the same Folder
instance. Make it so, that we cache all Folder instances that we have
asked for and hand back the existing one if we ask again for it,
rather than recreate a new instance.
Also, make getfolders() a noop for LocalStatus. We attempted to
derive the foldername from the name of the LocalStatusfile. However,
this is not really possible, as we do file name mangling
(".$" -> "dot", "/" -> ".") and there is no way to get the original folder
name from the LocalStatus file name anyway.
This commit could potentially solve the "file not found" errors, that people
have been seeing with their LocalStatusCache files. If we have 2
instances of a LocalStatusFolder pointing to the same file, our locking
system would not work.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
When logging to a file using the -l switch, we would still write an initial
banner to the file. This was never intended. Quiet should be really quiet
unless it experiences an error. Simplify the logging statement, to do nothing
if logevel is set to "WARNING" aka quiet.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
While looking at the code to investigate if an why we sometimes don't
seem to honor the write lock, I made it use the more modern "with lock:"
pattern.
Still have not found out how we could ever be using 2 instances of the
LocalStatusFolder for the same folder.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
If we throw an OfflineImapError in case of the Repository()
initialization, we display the nice error message and exit rather
than bomb out with a traceback. Misconfiguring a repository name in
the configuration file is now nicely pointed out to the user.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
When misconfiguring OLI, e.g. by specifying a repository name that was
not configured anywhere, we would bomb out with cryptic "NoSectionError".
Throw OfflineImapError that explains what has happened. We still need to
avoid throwing exceptions with Tracebacks here though.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
If 'readonly' is True, folders shouldn't be created (regardless of
'createfolders' option). With old behavior, instead folders were always created
when 'readonly' is True (even if 'createfolders' was also False), which is a
serious bug (offlineimap was creating folders in all read-only repositories).
'createfolders' should only play a role if 'readonly' is False, in which case
folders should only be created if 'createfolders' is True.
Submitted-by: Vladimir Nesov <robotact@gmail.com>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
This will allow our callers who are capable of dealing with
readonly folders to properly detect this condition and act
accordingly.
One example is Gmail's "Chats" folder that is read-only,
but contains logs of the quick chats.
Minor Changelog improvements.
Tested-by: Abdó Roig-Maranges <abdo.roig@gmail.com>
Signed-off-by: Eygene Ryabinkin <rea@codelabs.ru>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
As Gmail was only announcing the presence of the UIDPLUS extension
after we logged in, and we were then only getting server
capabilities before, a hack was introduced that checked the
existence of an APPENDUID reply, even if the server did not claim
to support it.
However, John Wiegley reports problems, where the APPENDUID would
be None, and we attempt to go this path (it seems that imaplib2
returns [None] if there is no such reply, so our test here for "!="
might fail. Given that this is an undocumented imaplib2 function
anyway, and we do fetch gmail capabilities after authentication,
this hack should no longer be necessary.
We had problems there earlier, where imapobj.response() would
return [None] although we had received a APPENDUID response from
the server, this might need more debugging and testing.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
By default OfflineImap propagates new folders in both
directions. Sometimes this is not what you want. E.g. you might want
new folders on your IMAP server to propagate to your local MailDir,
but not the other way around. The 'readonly' setting on a repository
will not help here, as it prevents any change from occuring on that
repository. This is what the `createfolders` setting is for. By
default it is `True`, meaning that new folders can be created on this
repository. To prevent folders from ever being created on a
repository, set this to `False`. If you set this to False on the
REMOTE repository, you will not have to create the `Reverse
nametrans`_ rules on the LOCAL repository.
Also implement a test for this
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Reported by sharat87 in https://github.com/spaetz/offlineimap/pull/38,
he would often get an unhandled Exception when trying to
releaseconnection() a connection that was not in the pool of
connections.
The reason this could happen is that when folder.IMAP.quickchanged()
raises an Exception in select(), we would release the connection in the
"except" handling, and than release the same connection in the "finally"
clause, which led to the error. The right thing is to only release the
connection once, of course.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
As reported by James Cook, we would not check the fingerprint of the SSL
server, as we were looking for the 'ssl' module in locals() rather than
globals(). Ooops!
Rather than using globals() though, I simply remove the by-now
superfluous check. We now rely on python2.6 and we unconditionally
import the SSL module in any case, so it needs to be there.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
The warn() method tries to set the color to red. This leads to a garbled
tty after endwin() has been called. So lets simply use the UIBase
implementation.
Signed-off-by: Christoph Höger <christoph.hoeger@tu-berlin.de>
Somehow we failed if no dry-run setting had been specified in the config
file. This got caught thanks to extending the test suite with a stock
configuration.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
In 2.6 all logging classes are not the new-style ones, so they
have no mro() method and, thus, we can't use super() for them.
Since CursesLogHanler is singly-inherited method, there will
be no problems in usage of the explicit superclass name.
Signed-off-by: Eygene Ryabinkin <rea@codelabs.ru>
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
We autodetect the folder separator on IMAP servers and ignore any 'sep'
setting in the repository section for IMAP servers. Detect if there is
such a setting and warn the user about it.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Previously folderfilters had to match both the local AND remote
name which caused unwanted behavior in combination with nametrans
rules. Make it operate on the untranslated remote names now and
clarify in the command line option help text.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
This reverts commit 4d47f7bf3c.
This is one of two candidates for introducing the instabilities that
John Wiegley observed. We need to reintroduce with careful testing only.
The original patch has been mostly reverted.
This reverts commit 47390e03d6.
It is one of two potential candidates for the APPENDUID
regression that John Wiegley reported. We need to examine this
carefully before reintroducing this patch.
Resolved Changelog.draft.rst conflict.
Prevent savemessage(), and savemessageflags() to occur in dryrun mode in
all backends. Still need to protect against deletemessage().
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
IMAP, Maildir, and LocalStatus abort if in dry-run mode. IMAP and Maildir
will log that they "would have" created a new folder.
This will probably fail later on as we can not cache messagelists on
folder that don't exist, so --dry-run is not yet safe when new folders
have been created.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
1) Set attribute self.dryrun depending on whether we are in dry-run mode.
2) Don't actually call hooks in --dry-run (just log what you would
invoke
3) Don't write out the mbnames file in --dry-run mode.
Repository, and Folder levels still need to be protected in dry-run mode
as of now.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
And set the [general]dry-run=True setting if yes. It is not used yet.
Also set ui.dryrun to True so we can output what WE WOULD HAVE DONE in
dryrun mode.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
A convenience helper function that allows to set a configuration value
if the user has not explicitly configured anything ie the option does
not exist yet in the configuration. It won't do anything, if the option
exists.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Bail out with a better Exception and error text. The whole mapped
UID situation needs to be improved though.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
If we cannot identify the new UID after a sendmessage(), log a better error
message, including the server response for better debugging.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
While improving the test suite, I noticed that we would not create folders on
the remote in some cases when we should (yay for test suites!). This is because
we were testing the untransposed LOCAL foldername and check if it existed on
the remote side when deciding whether we should potentially create a new folder.
Simplify the code by transposing the LOCAL folder names in dst_hash, saving us
to create another confusing "newsrc" temp variable. Make the code a bit more
readable by using dst_name_t to indicate we operate a transposed folder name.
This now passes test 03 (using invalid nametrans rules) when test 03 would pass
before.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Rename variable src_name to src_name_t to indicate that it is the transposed
name. Also rather than testing the hash thingie, we can simply test for
"if source_name_t in dst_folders" now.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
This allows to compare folders directly with strings. It also allows
constructs such as "if 'moo' in repo.getfolders()".
See the code documentation for the exact behavior (it basically is equal if
it's the same instance *or* a string matching the untranslated folder name.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
By default we sort folders alphabetically (for IMAP) according to their
transposed names. For python3, we need to bend a bit backwards to still
allow the use of a cmp() function for foldersort. While going through, I
discovered that we never sort folders for Maildir.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
There is no need to cast 0 to 'long' even if we want to compare it to long
numbers in modern pythons.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
This won't work in python3 anymore, so just use sorted() when needed.
In one case, we could remove the sort() completely as were were sanity checking
one line above, that we only having one UID as response which makes sorting
unneeded.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
class BaseRepository(object, CustomConfig.ConfigHelperMixin):
led to TypeError: Cannot create a consistent method resolution
order (MRO) for bases ConfigHelperMixin, object. Switching the inherited
classes helps.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Replace low-level thread.get_ident() with threading.currentThread().ident.
This works both in python2.6 and python3. (thread is renamed _thread and its
direct use is not recommended)
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
all we want to know is if we got some string'ish type and testing for isinstance
'basestring' is sufficient for that. Remove the import.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
All we want to do here is to test whether we got a string'ish type or a list
(literal), so testing for basestring will be fine.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
'set' is builtin since python2.6, so remove the imports. Also 'ssl' exists
since 2.6 and has everything we need, so no need for conditional import
tests here anymore.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
This import failed in python3, we need to either specify "." (relative) or
from OfflineImap.ui. (absolute). Done the latter.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
To have the code work in python3, we need to convert all occurences of
raise Exception, "text" to be proper functions. This style also adheres to PEP8.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
We do not use ui.locked() anymore to output an error message, the text comes
directly from the exception.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Attempt to load first ConfigParser and then configparser. At some point this
should be switched to do the python3 thing first.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
We mean the (numeric) logging level here and not the info() function.
logger.isEnabledFor() takes the logging level as argument,
obviously. This was a stupid typo that failed under python3.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
It can lead to potential dataloss (see recent commit log where I added a
scary warning about it to offlineimap.conf).
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Blinkenlights does not work well (at all) when using the --info
switch. All we really want here is an output that can be pasted as
debugging information.
Enforce the usage of the "Basic" ui, when the --info switch is used.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Most servers support the UIDPLUS extension, and we don't have to search
headers after each uploaded message. There is no need to CHECK the imap
server after each message when there is no need to search headers.
I have not measured the performance impact on real world servers, but
this lets us do less unneeded work in the common case.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
We were not cleaning out possibly existing APPENDUID messages before
APPENDing a new message. In case an old message were still hanging
around, this could *possibly* lead to retrieving and old UID. Things
should have been fine, but we do want to play safe here.
Also, make use of the "official" imaplib2 .response() command rather
than the internal _get_untagged_response() function.
Remove the hack that we would be looking for APPENDUID responses even if
the server claimed not to support the UIDPLUS ext. We now poll server
CAPABILITIES after login, and Gmail does provide us with the UIDPLUS
capability after login.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
We used "self" but the paramter was called "s". Fixes a crash when we
ui.warn() (only when using the MachineUI).
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
imaputil.imapsplit did not cope with strings that contained encoded
quotation marks, e.g. a folder name '"Make" Magazine' would fail and
crash OfflineImap. Make it work by adapting the regex that we use to
extract the first quote to also work with encoded \" quotes. (We do no
sanity checks that there is an even number of such marks within a string
though)
This commit makes such folders work. This was reported and analyzed by
Mark Eichin.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Conflicts:
Changelog.draft.rst
Rename getuidvalidity -> get_uidvalidity and cache the IMAP result.
1) Start modernizing our function names using more underscores
2) IMAPs implementation of get_uidvalidity was removing the UIDVALIDITY result
from the imaplib2 result stack, so subsequent calls would return "None".
As various functions can invoke this, this led to some errors that we
avoid by caching the current UIDVALIDITY value in the Folder instance.
There are more simplifications and improvements to be made.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
commit f2a94af5 introduced the use of time.sleep in ui/TTY.py without
importing it. This caused a regression in 6.5.2, crashing OfflineIMap
when in refresh mode.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
