With the new abort signal handler, we can send a signal that lets us
exit cleanly. Make use of this, rather than crashing out in ugly ways.
This affects only the Blinkenlights UI when pressing 'q'.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
This is a regression introduced when renaming signals due to the
improved CTRL-C handling. Regression in 6.5.0
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
THe new logging framwork spit putput to STDERR by default (as that is
pythons default), but we used to have STDERR, so make it go there again.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
The logging rework led to multipline output as we stopped urlencoding
the output lines. Urrg. Fixed this, so output is urlencoded again.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
These were needed for python <2.6 compatability, but since we depend on
python 2.6 now, these can go.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
The quiet UI should only output errors, and the final "Finished account
X in 2 seconds" clearly is none, so the message debug level needed to be
reduced to INFO to suppress it in the quiet ui.
Fixes https://github.com/spaetz/offlineimap/issues/6
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Rather than keeping a separate queue of all logged lines in memory, we
rely on the curses window scrolling functionality to scroll lines. On
resizing the terminal this means, we'll clear the screen and start
filling it afresh, but that should be acceptable.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
1) Rework the sleep abort request to set the skipsleep configuration
setting that the sleep() code checks.
2) Only output 15 rather than 50 debug messages on abort...
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Rename some variables, simplify the hotkeys treatment. Refresh/exit
signals still don't work as of yet, but will come.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Resizing a Blinkenlights terminal doesn't crash anymore, and actually
seems to be changing the size, with this patch.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
We were still referring to s.gettf() in sleeping(self, ...) causing each
attempt to sleep to crash. Fix this, and the CursesAccountFrame.sleeping()
method. I am sure, there is still wrong and broken but we are getting there.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
It is basically unused by now. Rework to be able to make use of it
later, no functional changes.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Logging was flawed as the output was e.g. heavily buffered and people
complained about missing log entries. Fix this by making use of the
standard logging facilities that offlineimap offers.
This is one big ugly patch that does many things. It fixes the
Blinkenlights backend to work again with the logging facilities.
Resize windows and hotkeys are still not handled absolut correctly, this
is left for future fixing. THe rest of the backends should be working fine.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
If port is None, we would try to format an empty string with %d wich
fails. Fix it by using %s.
Reported-by: Iain Dalton <iain.dalton@gmail.com>
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
This outputs a handy summary of your server configuration and version
strings etc, which is useful for bug reporting.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
It happens quick, and clutters the log. So we can usually skip this. We
will output a log entry when we actually create a new folder anyway.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Modify the UI:acct and acctdone functions to keep tab of the time
inbetween. Put self.ui.acct() and acctdone() at the right places in
accounts.py so that the timing happens at the right places.
While modifying that loop, flatten the nested try: try: except: finally:
constructs, we require python 2.5 now which copes with that.
At the end of each account sync you will now see something like:
*** Finished account 'test' in 0:05
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Output (2 of 500) when logging message copying. This required moving of
self.ui.copyingmessage into a different function where we actually have
the information about the progress handy.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Registering a thread (associating it with a certain account name) would
fail if it was already registered. However, as we a) never unregister most
threads (bad) and b) single-threaded mode reuses threads, we failed when
syncing multiple accounts in single-threading mode.
This commit cleans up the functions to not make re-registering a thread
fatal (it could be legitimate, however it *should* not occur). Future
work needs to be done to unregister new threads at the appropriate places.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
apply() has been deprecated since Python 2.3, and won't be working in
python 3 anymore. Use the functional equivalent throughout.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
The thread ID is not really useful and looks ugly. It also makes lines
longer than needed, there is more useful information we can put in the
log. So do away with it.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Use the ui.error infrastructure that has been put in place and use
ui.terminate even if we received an Exception, so that we can output the
list of errors that we have. This does away with 2 now unused functions
in ui/UIBase.py
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Rather than output the full list of messages, coalesce it into number
ranges wherever possible.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
I changed the API to pass in a folder rather than a list of folders, but
used getnicename() on the wrong object. It is not used on the folder but
on the ui object. Fix this and give the variable somewhat better names.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
We only copy to a single folder anyway, so clean up the code to only
pass in a single folder.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
Allowing to specify the char to use in the BLinkenlights is a bit over
the top and bloats our default offlineimap.conf. The dot is just fine,
so let us settle for it and cut the example config file by an unneeded
section.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
sys.exc_traceback is long deprecated and is seems removed in python2.7,
so document the legitimate use of sys.exc_info()[2] instead.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
Output all raised Exceptions error strings to the error log. If we are
in debug mode, we also output the traceback of the exception.
Save all exceptions that occur during the run time to a Queue and output
them all again when the offlineimap sync is finished.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
The traceback module has format_exc() for this purpose so let's use that.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
The python module thread is the low-level module we should avoid to use in favor
of threading. We still need it to support old python because Thread.ident
doesn't exist before python 2.6:
http://docs.python.org/library/threading.html#threading.Thread.ident
Make it clear we should avoid it.
Reviewed-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
- conform to PEP8
- explicitly define symbols instead of 'import *'
- remove unused import
Reviewed-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
The SigListener class was used to queue folders that we need to sync and
to receive "resync" and "abort" signals. It was undocumented and weird
and we had to pass "siglisteners" through the whole program.
Simply do away with it, and make 2 functions in the Account() class:
set_abort_event and get_abort_event which can be used to set and check
for such signals. This way we do not need to pass siglisteners all over
the place. Tested Blinkenlights and TTYUI uis to make sure that SIGUSR1
and SIGUSR2 actually still work.
Document those signals in MANUAL.rst. They were completly undocumented.
This simplifies the code and interdependencies by passing less stuff
around. Removes an undocumented and weirdly named class.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
Python's new style classes derive from object and str(class().__class__)
will return a slightly different format. class().__class.__name__ will
still work for both old and new style classes, so use that instead.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
Using threading._VERBOSE=1 is broken since python 2.6 till at least
python 3.2, (http://bugs.python.org/issue4188) so we can't use it for
our thread debugging.
Remove the usage of threading._VERBOSE, and implement a "light thread
debug log" that for now outputs information when a new thread is being
registered and when it is being unregistered. I am sure we will be able
to add more thread debugging information over the time.
Besides '-d thread' this will re-enable the usage of -d 'all' for the
most verbose debugging of all categories.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
This debug type will always be enabled whenever any debugging is enables
and it outputs debug messages that cannot be categorized among any of
imap, maildir (e.g. things that concern the sync logic).
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
Improve the code documentation (still much more to do) and also add some
more meat to the structure of the developer documentation.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
In commit 7a2a0225 [Don't pass list to ui.adding/deletingflags] we changed the
list logic for a per folder logic but forgot to remove one instance of
"destlist" which isn't valid anymore.
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
Previously we would output:
Folder sync sspaeth.de[INBOX.INBOX201004]:
Syncing INBOX.INBOX201004: IMAP -> Maildir
Folder sync sspaeth.de[INBOX.INBOX201006]:
Syncing INBOX.INBOX201006: IMAP -> Maildir
Folder sync sspaeth.de[INBOX.INBOX201009]:
Syncing INBOX.INBOX201009: IMAP -> Maildir
which is very repetitive and cluttered. By naming the folder sync
threads just according to the account and not the folder, the output
looks much nicer:
Folder sync [sspaeth.de]:
Syncing INBOX.INBOX201004: IMAP -> Maildir
Syncing INBOX.INBOX201006: IMAP -> Maildir
Syncing INBOX.INBOX201009: IMAP -> Maildir
If syncing multiple accounts in parallel, we will still get headers
indicating the account:
Folder sync [sspaeth.de]:
Syncing INBOX: IMAP -> Maildir
Syncing INBOX.INBOX201006: IMAP -> Maildir
Folder sync [gmail]:
Syncing INBOX: IMAP -> Maildir
This is a small fix that makes the output much nicer in my opinion.
Also don't output the thread name if we are in the MainThread, e.g. when
we output the initial offlineimap banner.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
We only have one "dstfolder" at a time when deleting/adding flags, so no
need to pass in a list of those to the ui functions that output the log
info.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
