The retry loop would release connection that would get
re-released upon ``finally`` clause. In consequence, an
exception would be cast.
Signed-off-by: Valentin Lab <valentin.lab@kalysto.org>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
This fix does not apply when any keyword in configured which is already
harmless.
Written-by: Igor Almeida <igor.contato@gmail.com>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
Extract the flag/keyword translation and combination logic to a
function.
Signed-off-by: Igor Almeida <igor.contato@gmail.com>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
This uses the destination folder's keyword mapping to translate the
message's keywords into some appropriate format.
Tested only with local Maildir.
Signed-off-by: Igor Almeida <igor.contato@gmail.com>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
The keywords are in the flag string, so imaputil can just strip the
usual \Flags.
Signed-off-by: Igor Almeida <igor.contato@gmail.com>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
This commit assembles a dictionary mapping user-specified IMAP keywords
to Maildir lower-case flags, similar to Dovecot's format
http://wiki2.dovecot.org/MailboxFormat/Maildir
Configuration example:
[Repository Local]
type = Maildir
localfolders = ~/Maildir/
customflag_a = $label1
customflag_b = $Forwarded
customflag_c = Junk
Signed-off-by: Igor Almeida <igor.contato@gmail.com>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
Remove filtering that was previously done to avoid errors in flag
handling.
Signed-off-by: Igor Almeida <igor.contato@gmail.com>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
Note that the stacks are grouped if similar, and the current
process (the one handling the signal) is identified and reports
where it was before the signal.
This can be quite handy when wanting to debug thread locks for
instance.
Signed-off-by: Valentin Lab <valentin.lab@kalysto.org>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
If this value is true, use (if possible) a timestamp based on message
Date or Delivery-date headers. The current system time is used
otherwise.
filename_use_mail_timestamp and utime_from_header are now completely
separated option that do not interfere one with other.
To handle this feature in a multithread context we use a hash to count
the number of mail with the same timestamp. This method is more accurate
than using the old lasttime and timeseq variables.
Signed-off-by: Sébastien Gross <seb•ɑƬ•chezwam•ɖɵʈ•org>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
Rather than having an option for syslog output, make a separate UI
option.
Signed-off-by: Ben Boeckel <mathstuf@gmail.com>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
Handle case where email's internal time is erroneously so large as to
cause overflow errors when setting file modification time with
utime_from_header = true.
Reported-by: Cameron Simpson <cs@zip.com.au>
Signed-off-by: Janna Martl <janna.martl109@gmail.com>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
Allow the user to block usage of known-bad versions of SSL and TLS.
Signed-off-by: Ben Boeckel <mathstuf@gmail.com>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
Return value set to 1 if sync failed and error is thrown. Otherwise set to 0 if successful.
Signed-off-by: Prashant Sachdeva <sachdevp@cs.ubc.ca>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
When new mail arrives, this hook is triggered, allowing the user to
play a sound, or launch a popup.
Signed-off-by: Matthew Krafczyk <krafczyk.matthew@gmail.com>
Since skipping a folder means no new data is downloaded, the UID validity
problem is a backup failure. Make it possible to alert or work around
it in scripts by signaling with the exit code.
Signed-off-by: Alex Kapranoff <alex@kapranoff.ru>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
Now it is possible to handle failed syncs in scripts.
Signed-off-by: Alex Kapranoff <alex@kapranoff.ru>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
1. When using maxage, local and remote messagelists are supposed to only
contain messages from at most maxage days ago. But local and remote used
different timezones to calculate what "maxage days ago" means, resulting
in removals on one side. Now, we ask the local folder for maxage days'
worth of mail, find the lowest UID, and then ask the remote folder for
all UID's starting with that lowest one.
2. maxage was fundamentally wrong in the IMAP-IMAP case: it assumed that
remote messages have UIDs in the same order as their local counterparts,
which could be false, e.g. when messages are copied in quick succession.
So, remove support for maxage in the IMAP-IMAP case.
3. Add startdate option for IMAP-IMAP syncs: use messages from the given
repository starting at startdate, and all messages from the other
repository. In the first sync, the other repository must be empty.
4. Allow maxage to be specified either as number of days to sync (as
previously) or as a fixed date.
Signed-off-by: Janna Martl <janna.martl109@gmail.com>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
Previously, syncing labels on a message always resulted in updating the
file modification time, even with utime_from_headers=true
This patch restores the file mtime to the previous value when
utime_from_headers=true, preventing a label synchronization from
breaking the promise that the file mtimes coincide with the header date.
Signed-off-by: Abdo Roig-Maranges <abdo.roig@gmail.com>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
We were using rtime for two different purposes:
- to store remote internal date
- to use in the utime_from_header option
Let's decouple the utime_from_header logic from rtime, now rtime means
remote internal date.
Signed-off-by: Abdo Roig-Maranges <abdo.roig@gmail.com>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
Upstream bug has been fixed, since imaplib2 v2.42 the untagged responses are
flushed (as stated by the documentation).
See https://sourceforge.net/p/imaplib2/bugs/7/
Signed-off-by: Pierre-Louis Bonicoli <pierre-louis.bonicoli@gmx.fr>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
This partially reverts commit 25513e9038.
Only changes about dates and times are reverted. The changes about the style are
kept.
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
The basic problem is in the context of syncing multiple accounts where
one is fast and the others are slower (due to the number of folders).
When the fast account completes, the other accounts are partially written
through the list and if the file is read during this time, the list can
be useless. However, in the general case, the file is probably left
around from a previous run of offlineimap and is more correct, so add an
option to leave it alone until all syncing is done.
Incremental is still the default since this running offlineimap using
its own timer setup is likely the most common setup. Turning it off
works best with one-shot mode triggered by cron or systemd timers.
Signed-off-by: Ben Boeckel <mathstuf@gmail.com>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
Fix regresssion introduced in 428349e3.
Prevent messages with UID's already in the destination folder from getting
excluded from the copy list.
Signed-off-by: Janna Martl <janna.martl109@gmail.com>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
Some messages were excluded from the copy/delete list after the UI message said
they were copied/deleted.
Also fix Internaldate2epoch(), which was wrong.
Signed-off-by: Janna Martl <janna.martl109@gmail.com>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
Suppose messages A and B were delivered to the remote folder at
"maxage + 1" days ago.
A was downloaded to the local folder "maxage + 1" days ago, but B was only
downloaded "maxage - 1" days ago (contrived scenario to illustrate the two
things that could happen). The behavior was that B gets deleted from the local
folder, but A did not. The expected behavior is that neither is deleted.
Starting where Base.py: __syncmessagesto_delete(self, dstfolder, statusfolder)
is called where:
- self is the remote folder
and
- dstfolder is the local folder.
It defines deletelist to be the list of messages in the status folder
messagelist that aren't in the remote folder messagelist with
not self.uidexists(uid)
A and B are both in the status folder. They're also both *NOT* in the remote
folder messagelist: this list is formed in IMAP.py: cachemessagelist(), which
calls _msgs_to_fetch(), which only asks the IMAP server for messages that are
"< maxage" days old.
Back to Base.py __syncmessagesto_delete(), look at the call
folder.deletemessages(deletelist), where folder is the local folder. This ends
up calling Maildir.py deletemessage() for each message on the deletelist. But we
see that this methods returns (instead of deleting anything) if the message is
in the local folder's messagelist. This messagelist was created by Maildir.py's
cachemessagelist(), which calls _scanfolder(), which tries to exclude messages
based on maxage. So at this point, we *WANT* A and B to be excluded -- then they
will be spared from deletion. This maxage check calls _iswithinmaxage(), and
actually does the date comparison based on the time found at the beginning of
the message's filename. These filenames were originally created in Maildir.py's
new_message_filename(), which calls _gettimeseq() to get the current time (i.e.
the time of retrieval).
Upshot: A's filename has an older timestamp than B's filename. A is excluded
from the local folder messagelist in _scanfolder(), hence spared from deletion
in deletemessage(); B is not excluded, and is deleted.
This patch does not address the timezone issue. As for the IMAP/timezone issue,
a similar issue is discussed in the thunderbird bug tracker here:
https://bugzilla.mozilla.org/show_bug.cgi?id=886534
In the end, they're solving a different problem, but they agree that
there is really no reliable way of guessing the IMAP server's internal
timezone.
Signed-off-by: Janna Martl <janna.martl109@gmail.com>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
Read proxy option in imapserver, instantiate a class in imaplibutil
using a self-defined keyword and a socket instance, and use this socket
instance to substitute the default socket instance used in imaplib2.
Signed-off-by: 夏恺(Xia Kai) <xiaket@gmail.com>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
Get real tracebacks (at the point that calls Request.abort()
and not from the point that handles collected abort requests)
and pass them to our calling functions to ease debugging
of user problems.
Signed-off-by: Eygene Ryabinkin <rea@codelabs.ru>
This simplifies logics for the user, especially if he uses both
fingerprint and certificate validation: it is hard to maintain
the compatibility with the prior behaviour and to avoid getting
default CA bundle to be disabled when fingerprint verification
is requested.
See
http://thread.gmane.org/gmane.mail.imap.offlineimap.general/6695
for discussion about this change.
Default CA bundle is requested via 'sslcertfile = OS-DEFAULT'.
I had also enforced all cases where explicitely-requested CA bundles
are non-existent to be hard errors: when users asks us to use CA
bundle (and, thus, certificate validation), but we can't find one,
we must error out rather than happily continue and downgrade to
no validation.
Reported-By: Edd Barrett <edd@theunixzoo.co.uk>
Reviewed-By: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
Signed-off-by: Eygene Ryabinkin <rea@codelabs.ru>
We have no variable "fullname", it must have been slipped in
unintentionally.
Blame commit:
0f40ca4799 more style consistency
Signed-off-by: Eygene Ryabinkin <rea@codelabs.ru>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
The note tells people to look at the source of the method, which
spinx.ext.viewcode conveniently links right next to the methods
signature.
Signed-off-by: Wieland Hoffmann <themineo@gmail.com>
We usually mutate some exceptions to OfflineImapError() and it is
a whole lot better if such exception will show up with the original
traceback, so all valid occurrences of such mutations were transformed
to the 3-tuple form of "raise". Had also added coding guidelines
document where this re-raise strategy is documented.
Signed-off-by: Eygene Ryabinkin <rea@codelabs.ru>
CustomConfigParser.getlocaleval() loads "pythonfile" at each call.
Besides unnecessary IO, in case that dynamic_folderfilter is true, the
code in "pythonfile" would behave stateless, since it is re-initialized
at each call of getlocaleval(), i.e., at every sync. Fix that by keeping
a singleton copy of localeval in CustomConfigParser after the first call
of getlocaleval().
Signed-off-by: Stefan Huber <shuber@sthu.org>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
Otherwise, messages logged through UIBase.error would only be passed to
UIBase._msg, which only logs at INFO. This causes error to not get
logged at all for the quit UI.
Signed-off-by: Wieland Hoffmann <themineo@gmail.com>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
This fixes a bug in which a message ended up with multiple gmail labels
header (X-Keywords or so). Fix fix it by removing all labels headers
before adding the updated one.
Signed-off-by: Abdo Roig-Maranges <abdo.roig@gmail.com>
There should be just one header storing gmail labels, but due to a bug,
multiple X-Keywords (or equivalent) headers may be found on the local
messages.
Now we, when extracting the labels from a message, we read all label
headers, instead of just the first one.
This has the consequence that some old labels stored locally in a second
X-Keywords (or third...) header, which effectively was rendered
invisible to offlineimap until now, may pop back up again and be pushed
to gmail. No labels will be removed by the changes in this commit,
though.
Signed-off-by: Abdo Roig-Maranges <abdo.roig@gmail.com>
It is a bit cleaner than making chains of calls like
{{{
value = os.path.expanduser(value)
value = os.path.abspath(value)
}}}
since we do see all transformations to be applied in a single
iterable and have no repeated code like in the above example.
Signed-off-by: Eygene Ryabinkin <rea@codelabs.ru>
- Multi-line documentation for functions and methods
now has ending triple-double-quotes on an own line,
as per PEP 257.
- Added documentation and comments to almost all functions
and methods.
- Added stub implementations for getconfig() and getsection()
inside CustomConfig.ConfigHelperMixin to provide sane
run-time diagnostics for classes that doesn't implement them.
Signed-off-by: Eygene Ryabinkin <rea@codelabs.ru>
The GNU GPL and the OpenSSL license are incompatible. Some distributions
take a hardline stance and do not consider OpenSSL to be a systems library
(which would permit the usage/distribution of OpenSSL) when distributing
apps such as OfflineImap from the same repository. In order to solve these
distributions dilemma, we add the OpenSSL exception to our GNU GPL v2+ license.
This allows for unambiguous use/distribution of our GNU GPL'ed application
with a python linking to openssl.
Consent of all contributors has been requested via email by
Sebastian@SSpaeth.de. With very few exceptions of minor contributions (which
might or might not by copyright-worthy) all past contributors have consented
to adding the OpenSSL exception. None of the replying authors has disagreed
with adding the exception.
The corresponding issues at question:
https://github.com/OfflineIMAP/offlineimap/issues/104
Debian bug #747033
We are still missing consent from:
1 Asheesh Laroia
2 Bart Kerkvliet
4 Daniel Burrows
5 David Favro
1 David Logie
1 Eric Dorland
1 Ethan Schoonover
49 Eygene Ryabinkin
1 Loui Chang
1 Luca Capello
1 Michael Witten
2 Mike Dawson
1 Peter Colberg
1 Scott Henson
1 Tom Lawton
1 W. Trevor King
2 X-Ryl669
1 buergi
2 dtk
5 mj
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Commit 7df765cfdb introduced regression:
GmailMaildir caches labels in its own function and it was testing the
presence of the 'labels' key in message descriptor. But 7df765cf
changed descriptor initialization and this key is always present.
So now we have 'labels_cached' flag that tells us if labels were
already cached or not.
Signed-off-by: Eygene Ryabinkin <rea@codelabs.ru>
Create initializer function that puts default values to all fields
of message list item. Fix all code that directly assigns some hash
to the elements of messagelist: for direct assignments only initializer
is now permitted, all other modification are done in-place.
Signed-off-by: Eygene Ryabinkin <rea@codelabs.ru>
The example illustrations were slightly cryptic;
modify them to be more obvious.
Fix case #2 (message starts with two line breaks)
where additional line break was shown and coded.
Signed-off-by: Eygene Ryabinkin <rea@codelabs.ru>
The parameter's value is a string representing the linebreak,
and can sometimes contain just '\n', in which case naming it
crlf is slightly misleading.
Signed-off-by: Eygene Ryabinkin <rea@codelabs.ru>
For cases like
http://article.gmane.org/gmane.mail.imap.offlineimap.general/6468
it is beneficial to see that folder name was translated and the result
of this translation on a single line: having log like
{{{
Folder Boring/Wreck [acc: tmarble@info9.net]:
Syncing Boring/Breck: Gmail -> Maildir
}}}
with translated name on the "Folder" line and original one on the
"Syncing" line isn't very intuitive.
Signed-off-by: Eygene Ryabinkin <rea@codelabs.ru>
It is always good to see which version we're talking about, so I had
added explicit marker for -devel, -release, -rcX and other states of
the OfflineIMAP.
Signed-off-by: Eygene Ryabinkin <rea@codelabs.ru>
For servers without UIDPLUS we are inserting additional header
just after transformation '\n' -> CRLF was done. addmessageheaders()
was written to work with just '\n' as the separator, so X-OfflineIMAP
header wasn't preceeded by the CRLF, but just by '\n'.
Signed-off-by: Eygene Ryabinkin <rea@codelabs.ru>
private methods prevent them from being overriden on derived classes. In
GmailFolder we need to override copymessageto, so it can't be private.
Before this commit, copymessageto was made private in Base but not in
GmailFolder. The end result was that labels were not set when copying
the message content, and always needed to be set on the label copying
pass.
Pointyhat-to: Eygene Ryabinkin
Signed-off-by: Eygene Ryabinkin <rea@codelabs.ru>
... and not self.filterheaders. With the current code this change
is no-op (since self.filterheaders is always passed as header_list),
but it is a bug in general.
Signed-off-by: Eygene Ryabinkin <rea@codelabs.ru>
If when we request a LocalStatus folder, the folder has to be created,
we look whether the other backend has data, and if it does we migrate
it to the new backend.
The old backend data is left untouched, so that if you change back say
from sqlite to plaintext, the older data is still there. That should
not lead to data loss, only a slower sync while the status folder gets
updated.
Signed-off-by: Eygene Ryabinkin <rea@codelabs.ru>
* Do not inherit LocalStatusSQLiteFolder class from the plaintext
one.
* Use some functions already in BaseFolder in both, plaintext and
sqlite classes.
* Add a saveall method. The idea is that saveall dumps the entire
messagelist to disk, while save only commits the uncommited
changes. Right now, save is noop for sqlite, and equivalent to
saveall for plaintext, but it enables to be more clever on when we
commit to disk in the future.
Signed-off-by: Eygene Ryabinkin <rea@codelabs.ru>
* Implements Status Folder format v2, with a mechanism to upgrade an
old statusfolder.
* Do not warn about Gmail and GmailMaildir needing sqlite backend
anymore.
* Clean repository.LocalStatus reusing some code from
folder.LocalStatus.
* Change field separator in the plaintext file from ':' to '|'. Now
the local status stores gmail labels. If they contain field
separator character (formerly ':'), they get messed up. The new
character '|' is less likely to appear in a label.
Signed-off-by: Eygene Ryabinkin <rea@codelabs.ru>
Format headers X-Label and Keywords as a space separated list and all
other ones as comma-separated entities. This makes OfflineIMAP label
handling to be compatible with some user agents that recognise these
headers.
Signed-off-by: Eygene Ryabinkin <rea@codelabs.ru>
When synclabels config flag is set to "yes" for the GMail repo,
offlineimap fetches the message labels along with the messages, and
embeds them into the body under the header X-Keywords (or whatever
'labelsheader' was set to), as a comma separated list.
It also adds an extra pass to savemessageto, that performs label
synchronization on existing messages from GMail to local, the same way
it is done with flags.
We also introduce GmailMaildir repository that adds functionality to
change message labels. It keeps track of messages modification time,
so one can quickly detect when the labels may have changed.
Signed-off-by: Eygene Ryabinkin <rea@codelabs.ru>
In preparation for GMail label sync, we had split our some functionality
that will be needed further into their own functions. This also permitted
the code to look more compact and concise.
Signed-off-by: Eygene Ryabinkin <rea@codelabs.ru>
When filterheaders is set to a comma-separated list of headers,
OfflineIMAP removes those headers from messages before uploading them
to the server.
Signed-off-by: Eygene Ryabinkin <rea@codelabs.ru>
Since we just do multiple passes for saving the message without
actually modifying its content (apart from header insertion that
is CRLF-clean), we can change line ends to the proper CRLF just
once.
And we can also get message's date only once too.
Signed-off-by: Eygene Ryabinkin <rea@codelabs.ru>
Added the configuration setting usecompression for the IMAP repositories.
When enabled, the data from and to the IMAP server is compressed.
Signed-off-by: Eygene Ryabinkin <rea@codelabs.ru>
Make external API of class/module to be smaller, explicitely mark
all internal functions. Also annotate methods that are implemented
as the part of the parent class interface.
Signed-off-by: Eygene Ryabinkin <rea@codelabs.ru>
Allow people who want folder filtering to depend on the external
conditions or to make it dynamic for other reasons, to do what
they want.
New repository configuration knob 'dynamic_folderfilter' was
introduced; it defaults to 'False' that matches historical behaviour.
GitHub: #73
Signed-off-by: Eygene Ryabinkin <rea@codelabs.ru>
This commit fixes the case when we're invoking releaseconnection()
for a given imapobj twice.
This bug manifests itself as
{{{
ValueError: list.remove(x): x not in list
File "[...]/offlineimap/folder/IMAP.py", line 615, in savemessage
self.imapserver.releaseconnection(imapobj)
File "[...]/offlineimap/imapserver.py", line 130, in releaseconnection
self.assignedconnections.remove(connection)
}}}
Signed-off-by: Eygene Ryabinkin <rea@codelabs.ru>
When imaputil was parsing quoted strings, it treated "abcd\\"
as incomplete quoted string having escaped quote, rather than
properly-quoted string having escaped backslash.
GitHub issue: https://github.com/OfflineIMAP/offlineimap/issues/53
Signed-off-by: Eygene Ryabinkin <rea@codelabs.ru>
2.36 it includes support for SSL version override that was integrated
into our code before, no other changes.
Signed-off-by: Eygene Ryabinkin <rea@codelabs.ru>
- Fix for Gmail sending a BYE response after reading >100 messages
in a session.
- Includes fix for GitHub#15: patch was accepted upstream.
Signed-off-by: Eygene Ryabinkin <rea@codelabs.ru>
Second argument is exception traceback, not the message; without this
tracebacks like mentioned in
http://permalink.gmane.org/gmane.mail.imap.offlineimap.general/5712
were happening when this exception handling block was hit.
Signed-off-by: Eygene Ryabinkin <rea@codelabs.ru>
This greatly simplifies developer's life and will, possibly, allow
users familiar with Python to debug and fix the problems by
themselves.
We, possibly, should not give tracebacks for the problems like
"can't open connection", but this is up to the caller of this
routine not to provide traceback in this case.
Signed-off-by: Eygene Ryabinkin <rea@codelabs.ru>
self._expecting_data was used both as the expected data length and the
flag that we expect some data. This obviously fails when advertized
data length is zero, so self._expecting_data_len was introduced to
hold the length of the expected data and self._expecting_data was left
as the flag that we expect the data to come.
GitHub issue: https://github.com/OfflineIMAP/offlineimap/issues/15
Signed-off-by: Eygene Ryabinkin <rea@codelabs.ru>
It is called localfolders and holds expanded name for the same
variable for the local repository of the account that is being
processed.
GitHub issue: https://github.com/OfflineIMAP/offlineimap/issues/21
Signed-off-by: Eygene Ryabinkin <rea@codelabs.ru>
Bring the description in the template offlineimap.conf in sync to the
actual implementation: pass folder names to the sorting function, not
the offlineimap.folder.IMAP.IMAPFolder objects themselves.
GitHub issue: https://github.com/OfflineIMAP/offlineimap/issues/27
Signed-off-by: Eygene Ryabinkin <rea@codelabs.ru>
Global or per-repository option utime_from_message tells OfflineIMAP
to set file modification time of messages pushed from one repository
to another basing on the message's "Date" header.
This is useful if you are doing some processing/finding on your
Maildir (for example, finding messages older than 3 months),
without parsing each file/message content.
From: Cyril RUSSO <boite.pour.spam@gmail.com>
Signed-off-by: Eygene Ryabinkin <rea@codelabs.ru>
Added configuration option "auth_mechanisms" to the config file:
it is a list of mechanisms that will be tried in the specified order.
Author: Andreas Mack <andreas.mack@konsec.com>
Signed-off-by: Eygene Ryabinkin <rea@codelabs.ru>
It's nice to set up an ssh tunnel command which forwards an IMAP tcp
port inside an encrypted session, e.g. with ssh's "-W" flag. In this
case the tunnelled connection still requires authentication inside
IMAP session, because this is transport-only tunnel that substitutes
normal TCP/SSL connection.
New directive, 'transporttunnel' was added: it specifies the command
that will create the tunnel. Only one type of tunnel must be
specified for a single repository: we can't have both preauthenticated
and transport-type tunnels, they won't chain together.
From: Steve Purcell <steve@sanityinc.com>
Signed-off-by: Eygene Ryabinkin <rea@codelabs.ru>
- this method isn't as deprecated as IMAP LOGIN;
- it allows to keep hashed passwords on the server side;
- it has the ability to specify that the remote identity
is different from authenticating username, so it even
can be useful in some cases (e.g., migrated mailboxes);
configuration variable "remote_identity" was introduced
to leverage this functionality.
From: Andreas Mack <andreas.mack@konsec.com>
Signed-off-by: Eygene Ryabinkin <rea@codelabs.ru>
- created helper routine that will do authentication;
- routine tries each method in turn, first successful
one terminates it: makes things easier to read
and handle;
- renamed plainauth() inside offlineimap/imapserver.py
to loginauth(): the function does IMAP LOGIN authentication
and there is PLAIN SASL method, so previous name was
a bit misleading;
- slightly improved error reporting: all exceptions during
authentication will be reported at the end of the run;
- now loginauth() is never called if LOGINDISABLED is advertized
by the server; it used to be invoked unconditionally when
CRAM-MD5 fails, but we should respect server's opinion on
how to handle its users.
Signed-off-by: Eygene Ryabinkin <rea@codelabs.ru>
IMAP servers can return `NO` responses to the `APPEND` command,
e.g. here's an example response from Groupwise's IMAP server:
NO APPEND The 1500 MB storage limit has been exceeded.
In this case, savemessage() should abort the repository sync rather
than returning UID 0 which would cause the local copy of the message
being saved to get irreversibly deleted.
Signed-off-by: Adam Spiers <offlineimap@adamspiers.org>
Signed-off-by: Eygene Ryabinkin <rea@codelabs.ru>
mutt-sidebar and, probably, other MUA show mailboxes in the order
they are listed in the file written by mbnames. Therefore, to allow
customization of the order with which mailboxes are listed, introduce
the new 'sort_keyfunc' directive in the [mbnames] section.
'sort_keyfunc' must be a function that will be called once for each
mailbox. It must accept the only argument -- a dict with 2 items,
'accountname' and 'foldername', and should return an object that
will be used as the sorting key for each mailbox.
Default key function returns (d['accountname'], d['foldername']),
thus sorting by account name and then by the folder name.
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Eygene Ryabinkin <rea@codelabs.ru>
Make IDLE syncs be equal to the regular synchronisations
in respect to pre-sync and post-sync hooks.
From: mxgr7 <maxgerer@gmail.com>
Signed-off-by: Eygene Ryabinkin <rea@codelabs.ru>
Run the locked code under 'with': this guarantees that lock
will be released in any case.
This modification also avoids the case when our thread wasn't running
locked when exception was caught, another thread got the lock, our
code checked it via self.connectionlock.locked() and errorneously
released the lock thinking that is was running locked.
Signed-off-by: Eygene Ryabinkin <rea@codelabs.ru>
They are redundant in all pruned cases and sometimes even create some
problems, e.g., when one tries to jump through paragraphs in vi.
Signed-off-by: Eygene Ryabinkin <rea@codelabs.ru>
We now allow setting the SSL version used when connecting to IMAPS servers, and
do so via the `ssl_version` configuration option. We default to the current
practice (letting python's "ssl" library automatically detect the correct
version). There are however rare cases where one must specify the version to
use.
Signed-off-by: Ryan Kavanagh <rak@debian.org>
This eases testing of option values inside the code. This instance
is implemented as the read-only copy of the obtained 'options' object,
so callers won't be able to modify its contents.
Signed-off-by: Eygene Ryabinkin <rea@codelabs.ru>
The problem lies in the fact that offlineimap.folder.Base's method
syncmessagesto_copy() uses threaded code everytime it is suggested by
the derived class's suggeststhreads() (currently, only IMAP does this
suggestion), but offlineimap/init.py will not spawn the
exitnotifymonitorloop() from offlineimap.threadutil.
The root cause is that ExitNotifyThread-derived threads need
offlineimap.threadutil's exitnotifymonitorloop() to be running the
cleaner for the exitthreads Queue(), because it fills the queue via
the run() method from this class: it wants to put() itself to the
Queue on exit, so when no exitnotifymonitorloop() is running, the
queue will fill up. And if this thread is an instance of
InstanceLimitedThread that hits the limit on the number of threads,
then it will hold the instancelimitedsems[] semaphore will prevent
other InstanceLimitedThread()s of the same name to pass its start()
method.
The fix is to avoid using threaded code if we're running
single-threaded.
Signed-off-by: Eygene Ryabinkin <rea@codelabs.ru>
Obtained-from: X-Ryl669 <boite.pour.spam@gmail.com>
This is handy when we're debugging the thread locks: we can try to
understand which thread does what and how it was called.
Signed-off-by: Eygene Ryabinkin <rea@codelabs.ru>
offlineimap has several frontends that encourage running it from a
terminal under an X session. When X session closes for a system
shutdown, the terminals exit, after sending SIGHUP to their children.
Previously SIGHUP was treated to be equivalent to SIGUSR1, i.e. wake
up and sync all accounts. This causes delays during shutdown.
According to Wikipedia [0], SIGHUP has been repurposed from a
historical meaning to one of:
* re-read configuration files, or reinitialize (e.g. Apache, sendmail)
* controlling pseudo or virtual terminal has been closed
I believe second meaning is more appropriate for offlineimap, and
hence this patch makes SIGHUP to be handled in the same way SIGTERM
and SIGINT are handled.
[0] http://en.wikipedia.org/wiki/SIGHUP
Debian-Bug: http://bugs.debian.org/670120
Reported-By: Steve Langasek <steve.langasek@canonical.com>
Signed-off-by: Dmitrijs Ledkovs <xnox@debian.org>
Signed-off-by: Eygene Ryabinkin <rea@codelabs.ru>
Fix imapfolder.getmessageinternaldate misparsing the Date:
header from emails due to a bug or surprising behaviour by
email.utils.parsedate. This is because email.utils.parsedate's
return value contains the unadjusted hour value from the string
parsed but does not include information about the time zone in
which it is specified. For example (Python 2.7.3):
$ python -c "import email.utils;
print email.utils.parsedate('Mon, 20 Nov 1995 19:12:08 -0500')"
(1995, 11, 20, 19, 12, 8, 0, 1, -1)
(the -1 is the isdst field); the -0500 time zone is completely
ignored, so e.g. the same input with time "19:12:08 +0300" has
the same result. When passed to time.struct_time as allowed per
the parsedate documentation, this time is interpreted in GMT and
thus deviates from the correct value by the timezone offset
(in this example, -5 hours).
I consider this a bug in email.utils.parsedate: In my opinion,
since the return value of the parsetime doesn't include a timezone,
it should be expressed in terms of UTC rather than in terms of the
time zone from the Date header; the existence of
email.utils.parsedate_tz, to which I've switched, indicates that
maybe the authors were aware of this problem.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Previous commit e7ca5b25cb combined
checks for filtered folders in one place. However, it turns out there
was a reason to have them separate. getfolder() on a non-existent Maildir
fails and there might not be an equivalent local Maildir folder for a
filtered out IMAP folder.
Fix this by first checking if the remote folder should be filtered, and
only then retrieving the local folder (which should exist then).
This bug was found by our test suite!
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
the LocalStatus._folders cache was changed to be a dict that can be
searched for names. One instance were _folders was set to "None" was
accidentally left over. Fix this.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
commit e94642bb4d centralized folder filtering by using the
repository.should_sync_folder() function. Therefore there is no need
to check for folderfilter in the Maildir backend separately.
Origina patch by Dave, split into 3 by Sebastian
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Rather than later when retrieving them by IMAP, we determine the
"sync_this" value of a folder on Folder() initialization.
This also fixes a bug where folder structure was not propagated when
a folder was filtered out but included in the folderincludes list.
Patch by Dave, split and modified slightly by Sebastian
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
- Factor out the code to find a local folder given a remote folder
Patch by Dave, split and modified by Sebastian.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
If we ask twice for a LocalStatusFolder via getfolder(), we would
get a newly created instance each time. This can lead to problems,
as e.g. write locks protecting files only work within the same Folder
instance. Make it so, that we cache all Folder instances that we have
asked for and hand back the existing one if we ask again for it,
rather than recreate a new instance.
Also, make getfolders() a noop for LocalStatus. We attempted to
derive the foldername from the name of the LocalStatusfile. However,
this is not really possible, as we do file name mangling
(".$" -> "dot", "/" -> ".") and there is no way to get the original folder
name from the LocalStatus file name anyway.
This commit could potentially solve the "file not found" errors, that people
have been seeing with their LocalStatusCache files. If we have 2
instances of a LocalStatusFolder pointing to the same file, our locking
system would not work.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
When logging to a file using the -l switch, we would still write an initial
banner to the file. This was never intended. Quiet should be really quiet
unless it experiences an error. Simplify the logging statement, to do nothing
if logevel is set to "WARNING" aka quiet.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
While looking at the code to investigate if an why we sometimes don't
seem to honor the write lock, I made it use the more modern "with lock:"
pattern.
Still have not found out how we could ever be using 2 instances of the
LocalStatusFolder for the same folder.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
If we throw an OfflineImapError in case of the Repository()
initialization, we display the nice error message and exit rather
than bomb out with a traceback. Misconfiguring a repository name in
the configuration file is now nicely pointed out to the user.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
When misconfiguring OLI, e.g. by specifying a repository name that was
not configured anywhere, we would bomb out with cryptic "NoSectionError".
Throw OfflineImapError that explains what has happened. We still need to
avoid throwing exceptions with Tracebacks here though.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
If 'readonly' is True, folders shouldn't be created (regardless of
'createfolders' option). With old behavior, instead folders were always created
when 'readonly' is True (even if 'createfolders' was also False), which is a
serious bug (offlineimap was creating folders in all read-only repositories).
'createfolders' should only play a role if 'readonly' is False, in which case
folders should only be created if 'createfolders' is True.
Submitted-by: Vladimir Nesov <robotact@gmail.com>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
This will allow our callers who are capable of dealing with
readonly folders to properly detect this condition and act
accordingly.
One example is Gmail's "Chats" folder that is read-only,
but contains logs of the quick chats.
Minor Changelog improvements.
Tested-by: Abdó Roig-Maranges <abdo.roig@gmail.com>
Signed-off-by: Eygene Ryabinkin <rea@codelabs.ru>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
As Gmail was only announcing the presence of the UIDPLUS extension
after we logged in, and we were then only getting server
capabilities before, a hack was introduced that checked the
existence of an APPENDUID reply, even if the server did not claim
to support it.
However, John Wiegley reports problems, where the APPENDUID would
be None, and we attempt to go this path (it seems that imaplib2
returns [None] if there is no such reply, so our test here for "!="
might fail. Given that this is an undocumented imaplib2 function
anyway, and we do fetch gmail capabilities after authentication,
this hack should no longer be necessary.
We had problems there earlier, where imapobj.response() would
return [None] although we had received a APPENDUID response from
the server, this might need more debugging and testing.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
By default OfflineImap propagates new folders in both
directions. Sometimes this is not what you want. E.g. you might want
new folders on your IMAP server to propagate to your local MailDir,
but not the other way around. The 'readonly' setting on a repository
will not help here, as it prevents any change from occuring on that
repository. This is what the `createfolders` setting is for. By
default it is `True`, meaning that new folders can be created on this
repository. To prevent folders from ever being created on a
repository, set this to `False`. If you set this to False on the
REMOTE repository, you will not have to create the `Reverse
nametrans`_ rules on the LOCAL repository.
Also implement a test for this
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Reported by sharat87 in https://github.com/spaetz/offlineimap/pull/38,
he would often get an unhandled Exception when trying to
releaseconnection() a connection that was not in the pool of
connections.
The reason this could happen is that when folder.IMAP.quickchanged()
raises an Exception in select(), we would release the connection in the
"except" handling, and than release the same connection in the "finally"
clause, which led to the error. The right thing is to only release the
connection once, of course.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
As reported by James Cook, we would not check the fingerprint of the SSL
server, as we were looking for the 'ssl' module in locals() rather than
globals(). Ooops!
Rather than using globals() though, I simply remove the by-now
superfluous check. We now rely on python2.6 and we unconditionally
import the SSL module in any case, so it needs to be there.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
The warn() method tries to set the color to red. This leads to a garbled
tty after endwin() has been called. So lets simply use the UIBase
implementation.
Signed-off-by: Christoph Höger <christoph.hoeger@tu-berlin.de>
Somehow we failed if no dry-run setting had been specified in the config
file. This got caught thanks to extending the test suite with a stock
configuration.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
In 2.6 all logging classes are not the new-style ones, so they
have no mro() method and, thus, we can't use super() for them.
Since CursesLogHanler is singly-inherited method, there will
be no problems in usage of the explicit superclass name.
Signed-off-by: Eygene Ryabinkin <rea@codelabs.ru>
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
We autodetect the folder separator on IMAP servers and ignore any 'sep'
setting in the repository section for IMAP servers. Detect if there is
such a setting and warn the user about it.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Previously folderfilters had to match both the local AND remote
name which caused unwanted behavior in combination with nametrans
rules. Make it operate on the untranslated remote names now and
clarify in the command line option help text.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
This reverts commit 4d47f7bf3c.
This is one of two candidates for introducing the instabilities that
John Wiegley observed. We need to reintroduce with careful testing only.
The original patch has been mostly reverted.
This reverts commit 47390e03d6.
It is one of two potential candidates for the APPENDUID
regression that John Wiegley reported. We need to examine this
carefully before reintroducing this patch.
Resolved Changelog.draft.rst conflict.
Prevent savemessage(), and savemessageflags() to occur in dryrun mode in
all backends. Still need to protect against deletemessage().
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
IMAP, Maildir, and LocalStatus abort if in dry-run mode. IMAP and Maildir
will log that they "would have" created a new folder.
This will probably fail later on as we can not cache messagelists on
folder that don't exist, so --dry-run is not yet safe when new folders
have been created.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
1) Set attribute self.dryrun depending on whether we are in dry-run mode.
2) Don't actually call hooks in --dry-run (just log what you would
invoke
3) Don't write out the mbnames file in --dry-run mode.
Repository, and Folder levels still need to be protected in dry-run mode
as of now.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
And set the [general]dry-run=True setting if yes. It is not used yet.
Also set ui.dryrun to True so we can output what WE WOULD HAVE DONE in
dryrun mode.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
A convenience helper function that allows to set a configuration value
if the user has not explicitly configured anything ie the option does
not exist yet in the configuration. It won't do anything, if the option
exists.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Bail out with a better Exception and error text. The whole mapped
UID situation needs to be improved though.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
If we cannot identify the new UID after a sendmessage(), log a better error
message, including the server response for better debugging.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
While improving the test suite, I noticed that we would not create folders on
the remote in some cases when we should (yay for test suites!). This is because
we were testing the untransposed LOCAL foldername and check if it existed on
the remote side when deciding whether we should potentially create a new folder.
Simplify the code by transposing the LOCAL folder names in dst_hash, saving us
to create another confusing "newsrc" temp variable. Make the code a bit more
readable by using dst_name_t to indicate we operate a transposed folder name.
This now passes test 03 (using invalid nametrans rules) when test 03 would pass
before.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Rename variable src_name to src_name_t to indicate that it is the transposed
name. Also rather than testing the hash thingie, we can simply test for
"if source_name_t in dst_folders" now.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
This allows to compare folders directly with strings. It also allows
constructs such as "if 'moo' in repo.getfolders()".
See the code documentation for the exact behavior (it basically is equal if
it's the same instance *or* a string matching the untranslated folder name.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
By default we sort folders alphabetically (for IMAP) according to their
transposed names. For python3, we need to bend a bit backwards to still
allow the use of a cmp() function for foldersort. While going through, I
discovered that we never sort folders for Maildir.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
There is no need to cast 0 to 'long' even if we want to compare it to long
numbers in modern pythons.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
This won't work in python3 anymore, so just use sorted() when needed.
In one case, we could remove the sort() completely as were were sanity checking
one line above, that we only having one UID as response which makes sorting
unneeded.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
class BaseRepository(object, CustomConfig.ConfigHelperMixin):
led to TypeError: Cannot create a consistent method resolution
order (MRO) for bases ConfigHelperMixin, object. Switching the inherited
classes helps.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Replace low-level thread.get_ident() with threading.currentThread().ident.
This works both in python2.6 and python3. (thread is renamed _thread and its
direct use is not recommended)
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
all we want to know is if we got some string'ish type and testing for isinstance
'basestring' is sufficient for that. Remove the import.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
All we want to do here is to test whether we got a string'ish type or a list
(literal), so testing for basestring will be fine.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
'set' is builtin since python2.6, so remove the imports. Also 'ssl' exists
since 2.6 and has everything we need, so no need for conditional import
tests here anymore.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
This import failed in python3, we need to either specify "." (relative) or
from OfflineImap.ui. (absolute). Done the latter.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
To have the code work in python3, we need to convert all occurences of
raise Exception, "text" to be proper functions. This style also adheres to PEP8.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
We do not use ui.locked() anymore to output an error message, the text comes
directly from the exception.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Attempt to load first ConfigParser and then configparser. At some point this
should be switched to do the python3 thing first.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
We mean the (numeric) logging level here and not the info() function.
logger.isEnabledFor() takes the logging level as argument,
obviously. This was a stupid typo that failed under python3.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
It can lead to potential dataloss (see recent commit log where I added a
scary warning about it to offlineimap.conf).
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Blinkenlights does not work well (at all) when using the --info
switch. All we really want here is an output that can be pasted as
debugging information.
Enforce the usage of the "Basic" ui, when the --info switch is used.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Most servers support the UIDPLUS extension, and we don't have to search
headers after each uploaded message. There is no need to CHECK the imap
server after each message when there is no need to search headers.
I have not measured the performance impact on real world servers, but
this lets us do less unneeded work in the common case.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
We were not cleaning out possibly existing APPENDUID messages before
APPENDing a new message. In case an old message were still hanging
around, this could *possibly* lead to retrieving and old UID. Things
should have been fine, but we do want to play safe here.
Also, make use of the "official" imaplib2 .response() command rather
than the internal _get_untagged_response() function.
Remove the hack that we would be looking for APPENDUID responses even if
the server claimed not to support the UIDPLUS ext. We now poll server
CAPABILITIES after login, and Gmail does provide us with the UIDPLUS
capability after login.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
We used "self" but the paramter was called "s". Fixes a crash when we
ui.warn() (only when using the MachineUI).
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
imaputil.imapsplit did not cope with strings that contained encoded
quotation marks, e.g. a folder name '"Make" Magazine' would fail and
crash OfflineImap. Make it work by adapting the regex that we use to
extract the first quote to also work with encoded \" quotes. (We do no
sanity checks that there is an even number of such marks within a string
though)
This commit makes such folders work. This was reported and analyzed by
Mark Eichin.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Conflicts:
Changelog.draft.rst
Rename getuidvalidity -> get_uidvalidity and cache the IMAP result.
1) Start modernizing our function names using more underscores
2) IMAPs implementation of get_uidvalidity was removing the UIDVALIDITY result
from the imaplib2 result stack, so subsequent calls would return "None".
As various functions can invoke this, this led to some errors that we
avoid by caching the current UIDVALIDITY value in the Folder instance.
There are more simplifications and improvements to be made.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
commit f2a94af5 introduced the use of time.sleep in ui/TTY.py without
importing it. This caused a regression in 6.5.2, crashing OfflineIMap
when in refresh mode.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
We were using super() on a class derived from logging.Formatter() which
worked fine in python 2.7. Apparently python 2.6 uses old-style classes
for this, so the TTYUI broke and crashed OfflineImap. This was
introduced in OLI 6.5.0, I think.
Fix it by calling logging.Formatter.... directly, rather than the
elegant super() (which I happen to like a lot more than is appropriate
in the python world).
Reported by Nik Reiman as github issue 23, should fix that issue.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
When deleting many (eg 2000) mails using the SQLITE backend, this takes
a long time durig which OfflineImap can not be aborted via
CTRL-C. Thinking it had frozen permanently, I killed it hard, leaving a
corrupted db journal (which leads to awkwards complaints by OLI on
subsequent starts!). That shows that delete performance is critical and
needs improvement.
We were iterating through the list of messages to delete and deleted
them one-by-one execute()'ing a new SQL Query for each message. This
patch improves the situation by allowing us to use executemany(), which
is -despite still being one SQL query per message- much faster. This is
because rather than performing a commit() after each mail, we now do
only one commit() after all mails have been deleted.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
OfflineIMAP v6.5.2-rc1 (2012-01-09)
===================================
Commits v6.5.1.1 - v6.5.2-rc1:
note: Proper Changelog still in Changelog-draft.rst
d72bb88 Improve error message
3284e01 Revert "use .response() rather _get_untagged_response()"
81f194a mbnames should write out local and not nametransformed box names
7184ec2 Sanity check return value of UIDVALIDTY response
50de217 Allow to pass 'force' arg to selectro() to enforce a new select
ed71805 Changelog entry about "realdelete" option
0a275b9 Add scary warnings about "realdelete" option
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Recently the internal function use of imaplib2's _get_untagged_response()
was switched to use the public documented .response() function (which
should return the same data). However within a few fays we received reports
that both uses of a) the UIDVALIDITY fetching and b) the APPENDUID fetching
returned [None] as data although the IMAP log definitely shows that data
was returned. Revert to using the undocumented internal imaplib2 function,
that seemed to have worked without problems. This needs to be taken up to
the imaplib2 developer.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Rather than to write out the nametrans'lated folder names for mbnames,
we now write out the local untransformed box names. This is generally
what we want. This became relevant since we support nametrans rules on
the local side since only a short time. Reported by Paul Collignan.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
We have a reported case where response('UIDVALIDITY') returned [None]
which results in an ugly non-intuitive crash. Sanity check and report
something nicer.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Pass through the 'force' argument from selectro() to select() so that it
can also enforce a new SELECT even if we already are on that folder.
Also change the default parameter from '0' to 'False' to make clear that
this is a Bool.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Add a changelog to W. Trevor King's previous commit. Also make wording a
bit more consistent and and remove a now unneeded comparison (dirname is
always set when extension is set).
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
On Tue, Dec 13, 2011 at 12:00:57PM -0500, W. Trevor King wrote:
> I've attached a patch that does fix the problem…
Oops, *now* I've attached the patch and logs ;).
--
This email may be signed or encrypted with GnuPG (http://www.gnupg.org).
For more information, see http://en.wikipedia.org/wiki/Pretty_Good_Privacy
From 3067b1b4dfb00d165bd9480ea49f446adb12991d Mon Sep 17 00:00:00 2001
From: W. Trevor King <wking@drexel.edu>
Date: Tue, 13 Dec 2011 11:26:00 -0500
Subject: [PATCH] Only scan children in _getfolders_scandir if extension is set.
When sep is '/', MaildirRepository._getfolders_scandir recursively
checks sub-directories for additional maildirs. The old loop logic
always checked the top directory and its children. This lead to
children being found twice, once from their parent, with dirname
matching their directory name, and once from themselves, with a
dirname of ''.
This patch fixes the problem by only checking the top directory when
extension is not set (i.e. for the root directory).
Do not read in custom maildir flags, or we would try to sync them over
the wire. The next step will be to merge flag writes with existing
custom flags, so we don't lose information.
The long term goal will be to attempt to sync flags to the other side,
of course.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Blinkenlights UI 6.5.0 regression fixes only.
* Sleep led to crash ('abort_signal' not existing)
* Make exit via 'q' key work again cleanly
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
With the new abort signal handler, we can send a signal that lets us
exit cleanly. Make use of this, rather than crashing out in ugly ways.
This affects only the Blinkenlights UI when pressing 'q'.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
This is a regression introduced when renaming signals due to the
improved CTRL-C handling. Regression in 6.5.0
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
OfflineIMAP v6.5.1 (2012-01-07) - "Quest for stability"
=======================================================
* Fixed Maildir regression "flagmatchre" not found. (regressed in 6.5.0)
* Have console output go by default to STDOUT and not STDERR (regression
in 6.5.0)
* Fixed MachineUI to urlencode() output lines again, rather than
outputting multi-line items. It's ugly as hell, but it had been that
way for years.
* Remove the old global locking system. We lock only the accounts that
we currently sync, so you can invoke OfflineImap multiple times now as
long as you sync different accounts. This system is compatible with
all releases >= 6.4.0, so don't run older releases simultanous to this
one.
THe new logging framwork spit putput to STDERR by default (as that is
pythons default), but we used to have STDERR, so make it go there again.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
We were using the internal imaplib2 _get_untagged_response() functions a
few times. Replace 3 of these calls with 2 calls to the public function
response() rather than fudging with internals that could change anytime.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Remove the old global locking system. We lock only the accounts that we
currently sync, so you can invoke OfflineImap multiple times now as long
as you sync different accounts. This system is compatible with all
releases >= 6.4.0, so don't run older releases simultanous to this one.
This mostly reverts commit 0d95651417,
disabling the old global lock system that we had in parallel to the new one.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
The logging rework led to multipline output as we stopped urlencoding
the output lines. Urrg. Fixed this, so output is urlencoded again.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
These were needed for python <2.6 compatability, but since we depend on
python 2.6 now, these can go.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
This is a CRITICAL bug fix release for everyone who is on the 6.4.x
series. Please upgrade to avoid potential data loss! The version has
been bumped to 6.5.0, please let everyone know to stay away from 6.5.x!
I am sorry for this.
See details in the Changelog and even more gory details in commit
message for commit 8fc7227189.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
This change looks harmless, but it fixes a severe bugfix, potentially
leading to data loss! It fixes the "on n new uploads, it will redownload
n-1, n-2, n-3,... messages during the next syncs" condition, and this is
what happens:
If there are more than one Mails to upload to a server, we do that by
repeatedly invoking folder.IMAP.savemessage(). If the server supports
the UIDPLUS extension we query the resulting UID by doing a:
imapobj._get_untagged_response('APPENDUID', True)
and that is exactly the problem. The "True" part causes the reply to
remain in the "response stack" of the imaplib2 library. When we do
the same call on a subsequent message and the connection is still on the
same folder, we will get the same UID response back (imaplib2 only looks
for the first matching response and returns that). The only time we
clear the response stack, is when the IMAP connection SELECTS a
different folder.
This means that when we upload 10 messages, the IMAP server gives us
always the same UID (that of the first one) back. And trying to write
out 10 different messages with the same UID will confuse OfflineIMAP.
This is the reason why we saw the ongoing UPLOADING/DOWNLOADING behavior
that people reported. And this is the reason why we saw the
inconsistency in the UID mapping in the IMAP<->IMAP case.
I urge everyone to upgrade ASAP. Sorry for that, I don't know why the
problem only became prevalent in the recent few releases as this code
has been there for quite a while.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Rather than always parsing the filename, we only need to do so if the flags
have actually changed, otherwise we can keep the filename.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Previously, assigning a new UID to a mapped IMAP or Maildir repository
was done by loading the "local" item, saving it under a new UID and
deleting the old one. This involved lots of disk activity for nothing
more than an effective file rename in Maildirs, and lots of network
usage in the MappedUID cases.
We do this on every upload from a local to a remote item, so that can
potentially be quite expensive. This patch lets backends that support it
(Maildir, MappedUID) efficiently rename the file rather than having to
read the mail content, write it out as a new file and delete the old
file. This speeds up uploads from Maildir and the MappedUID server.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Various functions (such as change_message_uid) will want to construct
maildir filenames, so factor out the code into a helper.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Create a helper function that retrieves the UID, folder MD5, and Flags from
a message filename.
We need these items when we simply want to rename (=new UID) a Maildir
message file later. The new function can give us these components.
Rework, so we cache the calculation of the folder's md5 value once, it
never changes and we call it a lot.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
If someone had a custom :2,a flag, adding a new flag would lead to the
invalid maildir filename ...a:2,... due to regex deficiencies not coping
with this. Fix this so we alway produce valid maildir names.
Note that custom flags are still problematic: as the syncing to the
remote IMAP server will fail, the next sync will assume that they have
been removed from the remote IMAP side and they will be removed from the
local Maildir then. We will need to think about how to handle this. At
least, with this patch we won't lose standard flags and won't produce
invalid maildir names.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
The regex for catching Maildir message flags was
self.infosep + '.*2,([A-Z]+)' (infosep being ':').
The .* is bogus, as there is nothing between the : and the 2, per
maildir name specification, so remove that unneeded piece.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
When a new remote folder was detected, we tried to create the folder
locally on the Maildir and called repository.forgetfolders() to force a
new scanning of the Maildir. However, that implementation used the
inherited base function that did nothing. We simply needed to implement
forgetfolders() to set self.folder=None, so we would force a new read in
of the updated local folder structure.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
1) Rename the unintuitive repository.syncfoldersto() to
sync_folder_structure()
2) We were checking if the local repository is readonly and then turning
off any folder creation. But as we can create folders on a remote
repository too, we need to be more fine grained here. Just don't create
a folder on the repository that is marked readonly=True.
This still does not do away with the error message that one currently
gets on missing local folders.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
The quiet UI should only output errors, and the final "Finished account
X in 2 seconds" clearly is none, so the message debug level needed to be
reduced to INFO to suppress it in the quiet ui.
Fixes https://github.com/spaetz/offlineimap/issues/6
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Merge in the new logging mechanism, and provide an --info feature that
will help with debugging. There is still some unstableness, so there
will be another release soon, but this should be no worse than 6.4.2 at
least...
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Previously, we would simply bail out in an ugly way, potentially leaving
temporary files around etc, or while writing status files. Hand SIGINT
and SIGTERM as an event to the Account class, and make that bail out
cleanly at predefined points. Stopping on ctrl-c can take a few seconds
(it will e.g. finish to transfer the ongoing message), but it will shut
down cleanly.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
As reported in https://github.com/spaetz/offlineimap/pull/2, we would
fail when files are empty because file.read() would throw attribute
errors.
Fix this by removing the superfluous read() check and additionally log
some warning message.
Reported-by: Ralf Schmitt
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
When sep='/' in a Maildir, we were doing a os.path.join(dirname,'') on
the top level maildir, which results in a "dirname/", so all our maildir
folder names had slashes appended. Which is pretty much wrong, so this
fixes it by only using os.path.join when we actually have something to
append.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
We need the list of folders and the folder delimiter, but it was not
always retrieved early enough. E.g. when doing IMAP<->IMAP sync and the
local IMAP being readonly, we would bunk out with a mysterious error
message become repository.getsel() would still return None.
This commit fixes this error.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
imapserver.getdelim() was not used at all, so remove this function. The
folder delimiter is available via the repository.getsep() call.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
The folder delimiter is only initialized after a call to
acquireconnection(), so we must never call this function too
early. Include an assert() to make sure we get notified when we do.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Rather than keeping a separate queue of all logged lines in memory, we
rely on the curses window scrolling functionality to scroll lines. On
resizing the terminal this means, we'll clear the screen and start
filling it afresh, but that should be acceptable.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
1) Rework the sleep abort request to set the skipsleep configuration
setting that the sleep() code checks.
2) Only output 15 rather than 50 debug messages on abort...
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
The remote|local|statusrepo is an anttribute of each SyncableAccount()
anyway, so we don't need to pass it in, we can simply get it from the
Account().
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Rename some variables, simplify the hotkeys treatment. Refresh/exit
signals still don't work as of yet, but will come.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Resizing a Blinkenlights terminal doesn't crash anymore, and actually
seems to be changing the size, with this patch.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
We were still referring to s.gettf() in sleeping(self, ...) causing each
attempt to sleep to crash. Fix this, and the CursesAccountFrame.sleeping()
method. I am sure, there is still wrong and broken but we are getting there.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
This function can IMHO lead to possible deadlocks when waiting for the
connectionlock. Do add a comment to that regard, this will need to audit.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
The huge UI rework patch removed some obscure logic and special handling of
thread exit messages. It turns out that this was in fact still needed as a
specific exit message of the SyncRunner thread signified the threatmonitor
to quit.
We will want a nicer machinery for this in the future I guess, but fix the
eternal hang on exit by reintroducing a special exit message for the
SyncRunner thread, and return from the infinite monitor loop if SyncRunner
finishes.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
To make sure, the lock gets released even if we raise an exception between
acquire() and release()
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
All ExitNotifyThreads and InstanceLimitThreads are setDaemon(True) in their
constructor, so there is no need to do that again in the code.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
1) Differentiate error messages between imaplib.abort and imaplib.error
exceptions in the log.
2) Drop connections in the case of imapobj.error, it also might denote a
broken connection.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
During cleanup we often call releaseconnection in a finally: block. But
in cases of error, we might have dropped the connection earlier already
and set it to "None". In this case don't fail releaseconnection() but
make it a NOOP.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
The default parameter value was "None", and we were comparing that
directly to the imaplib2 value of is_readonly which is False or True, so
the comparison always returned "False".
Fix this by setting the default parameter to "False" and not
"None". Also convert all users of that function to use False/True.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
It is basically unused by now. Rework to be able to make use of it
later, no functional changes.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Logging was flawed as the output was e.g. heavily buffered and people
complained about missing log entries. Fix this by making use of the
standard logging facilities that offlineimap offers.
This is one big ugly patch that does many things. It fixes the
Blinkenlights backend to work again with the logging facilities.
Resize windows and hotkeys are still not handled absolut correctly, this
is left for future fixing. THe rest of the backends should be working fine.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
If folder creation failed, we would output the wrong repository and
folder name (copy'n paste error). Fix this so we actually output the
correct values.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Only import the lock, that we actually need. Also import the with statement
for use with python 2.5. We'll need it for sure in this file.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Drop a connection, if the NOOP to keep a connection open fails due to
broken connections.
Note that I believe this function is not working as intended. We grab
one random connection and send a NOOP. This is not enough to keep all
connections open, and if we invoke this function multiple times, we
might well always get the same connection to send a NOOP through.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
A repositories 'reference value is always prefixed to the full folder
path, so we should do so when creating a new one. The code had existed
but was commented out since 2003, I guess the "reference" option is not
too often used.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
If port is None, we would try to format an empty string with %d wich
fails. Fix it by using %s.
Reported-by: Iain Dalton <iain.dalton@gmail.com>
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
This outputs a handy summary of your server configuration and version
strings etc, which is useful for bug reporting.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Was getting too large, split into an parse_cmd_options and a sync()
function. Moving config and ui to self.config and self.ui to make them
available through the OfflineImap instance.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
It happens quick, and clutters the log. So we can usually skip this. We
will output a log entry when we actually create a new folder anyway.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
If we create a new folder we would previously not update our folder
list, which led to us skipping the synchronization of those new folders
during the initial run (subsequent runs would pick it up).
Invalidate the folder cache when we create a folder during folder
structure sync. Regetting the whole list from an IMAP server might be
slightly suboptimal from a performance point, but it is easy and will
lead to consistent results. Hopefully we will not have to create new
folders on each new run.
Reported-by: Daniel Shahaf <d.s@daniel.shahaf.name>
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Modify the UI:acct and acctdone functions to keep tab of the time
inbetween. Put self.ui.acct() and acctdone() at the right places in
accounts.py so that the timing happens at the right places.
While modifying that loop, flatten the nested try: try: except: finally:
constructs, we require python 2.5 now which copes with that.
At the end of each account sync you will now see something like:
*** Finished account 'test' in 0:05
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Thread names are used to determine the logging header in the TTY ui. A
recent change made them too terse (basically only changing the account
name and not the folder names). Unbreak.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Output (2 of 500) when logging message copying. This required moving of
self.ui.copyingmessage into a different function where we actually have
the information about the progress handy.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Rather than setting a global threadutil/profiledir variable, we make
set_profiledir a class function that sets the class variable profiledir.
While touching theprofiledir code, add warning to the user if the
profile directory existed before.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Registering a thread (associating it with a certain account name) would
fail if it was already registered. However, as we a) never unregister most
threads (bad) and b) single-threaded mode reuses threads, we failed when
syncing multiple accounts in single-threading mode.
This commit cleans up the functions to not make re-registering a thread
fatal (it could be legitimate, however it *should* not occur). Future
work needs to be done to unregister new threads at the appropriate places.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
When checking for the IMAP4.abort() exception, we need of course to
perform:
except imapobj.abort:
and not
except imapobj.abort():
Thanks to Johannes Stezenbach <js@sig21.net> for pointing to the glitch.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
apply() has been deprecated since Python 2.3, and won't be working in
python 3 anymore. Use the functional equivalent throughout.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Dave identified a case where our new dropped connection handling did
not work out correctly: we use the retry_left variable to signify
success (0=success if no exception occured).
However, we were decrementing the variable AFTER all the exception
checks, so if there was one due to a dropped connection, it
could well be that we 1) did not raise an exception (because we want to
retry), and 2) then DECREMENTED retry_left, which indicated "all is
well, no need to retry".
The code then continued to check() the append, which failed with the
above message (because we obtained a new connection which had not even
selected the current folder and we were still in mode AUTH). The fix is
of course, to fix our logic: Decrement retry_left first, THEN decide
whether to raise() (retry_left==0) or retry (retry_left>0) which would
then correctly attempt another loop. I am sorry for this newbie type of
logic error. The retry count loop was too hastily slipped in, it seems.
Reported-by: Dave Abrahams <dave@boostpro.com>
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
If APPEND raises abort(), the (typ, dat) variables will not be set, so
we should not be using it for the OfflineImapError Exception
string. Fixing and prettifying the string formatting a bit at the same
time.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
When syncfolder() fails, we output an error message containing the
foldername per the localfolder variable. However, the localfolder
variable is assigned inside our try: block and when the error occurs
there, we will have no localfolder variable to use for output. This
caused the errormsg to cause an Exception itself which unhelpfully
distracts from the root cause of the error.
Reconstruct the folder name in a bit more complex way, but in a way so
it is guaranteed to work (by relying on parameters passed in to the
function).
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
A report by Dave Abrahams showed that the dequote() function failed when
invoked with an empty string. This fixes the function to be more robust.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
nametrans rules can lead to different visiblename names for the
top-level directory, specifically both '.' and '' (the latter was
recently introduced). However, we need to be able to compare folder
names to see if we need to create a new directory or whether a directory
already exists, so we need to be able to compare a repositories
visiblename (=transposed via nametrans rule) with another folder.
To make the top-level directory comparison happen, we enforce a
top-level name of '', so that comparisons work.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Some Webservers (I am looking at you Gmail) send different capabilities
before and after login, so they can tailor their server capabilities to
the user. While legal, this is uncommon and we were not updating our
server capabilities. Doing so allows us to detect that Gmail actually
supports the UIDPLUS extension, and we will stop mangling headers when
uploading to Gmail. This could lead to some performance gains when we
upload many messages to Gmail.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Commit b0e88622c4 changed dst_hash[folder.visiblename] to
dst_hash[folder.name] but we did not adapt all places where it is needed
to use visiblename again. This led to attempting to create a name on
REMOTE ignoring the nametrans setting on the LOCAL repository.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Previously, we only checked if a LOCAL folder falls under the local
repositories folderfilter rule when deciding whether a folder should be
created on REMOTE.
However, we also do not want to create the folder on REMOTE if it would
fall under a folderfilter rule there. This patch prevents us from doing
so.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
It is not easy to think through when to use visiblenames() and whatnot. It seems I managed to not think it through properly. Which might be fixed now.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
The thread ID is not really useful and looks ugly. It also makes lines
longer than needed, there is more useful information we can put in the
log. So do away with it.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
This will ignore any nametrans rules, so we might want to limit this
only to cases where no nametrans has been specified, or we might want to
use the nametrans setting of the dest repo.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
getvisiblename() was only defined on IMAP(derived) foldertypes, but we
want it on eg. Maildirs too, so we define it centrally in Folder.Base.py
rather than only in folder.IMAP.py.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Currently we only filtered IMAP repositories, this patch enables filtering
for Maildir repositories too.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
We want to have these functions available for Maildir folders too, so we
can folderfilter a Maildir repository too (which is currently not possible)
This commit only move the corresponding functions from the IMAP to the Base
implementation. It should not change behavior in any way yet.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Also remove the removed parameters in the Gmail folder
initialization. This is one spot where I had forgotten to also strip the
parameters.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
If nametrans translates to an empty directory we want to find the
top-level directory by name '' and not by name '.'. This unbreaks
nametrans rules that result in empty folder names.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Previously, getfolder() would always construct new MaildirFolder()
objects, independent of whether the folder exists or not. Improve the
function to:
1) Scan and cache the folders if not already done
2) Return the same cached object if we ask for the same foldername twice
3) Reduce a tiny bit of code duplication
This is important because we handle stuff like folderfilter in the
scandir function and if we discard the scanned dir and create a new
object on folderget(), we will lose the folderfilter information.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Output a debug log line whenever we create a new folder on an IMAP
server. Also raise an OfflineImap Error in case we failed to create it.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
This variable shows if this folder should be synced or is disabled due to
a folderfilter statement. This lets us distinguish between a non-existent
folder and one that has been filtered out. Previously any filtered folder
would simply appear to be non-existing.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
The Message UID is already the key to self.messagelist, so we have that
information. It is redundant to save the UID again as
self.messagelist[uid]{'uid': uid} and we never made use of the
information anyway.
The same thing should be done with the other 2 backends.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
A more pythonic and less verbose way to do the same. Add a comment what the
variable is all about.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Warn the user and abort when we attempt a plaintext login, but the
server has explicitly disabled plaintext logins.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Use the ui.error infrastructure that has been put in place and use
ui.terminate even if we received an Exception, so that we can output the
list of errors that we have. This does away with 2 now unused functions
in ui/UIBase.py
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
We simply lock OfflineImap the same global way that we have always done
in addition to the previously implemented per-account lock. We can keep
both systems in parallel and then after a few stable releases, drop the
old-style global lock. by reverting this patch
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
The next commit will make use of OfflineImapError but is transient (the
old-style lock). The commit is supposed to be reverted after a few
releases. So add the new import in a separate commit, because we might
need this even when reverting the commit.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Previously, we were simply locking offlineimap whenever it was
running. Howver there is no reason why we shouldn't be able to invoke it
in parallel, e.g. to synchronize several accounts in one offlineimap
each.
This patch implements the locking per-account, so that it is possible to
sync different accounts at the same time. If in refresh mode, we will
attempt to loop three times before giving up.
This also fixes Debian bug #586655
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
open() and os.open() lead to different file permissions by default, and
while we have not changed the os.open that had been used, some code
changes led to these permissions slipping through. Fix this by setting
the permissions explicitly to 0666 (minus the users umask).
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
repos.getuesr() asks for a username if none is specified, but in the
case of a tunnel connection, we don't need one, so we need to skip the
repos.getuser() call here.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
IMAPFolder has the repository and foldername values so it can get the
transposed (aka visiblename) of a folder itself just fine. There is no
need to pass it in as an separate parameter.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
They have the Repository() which contains the root, so no need to pass
it in as an extra parameter. Rename repository.LocalStatus()'s
self.directory to self.root for consistency with other backends.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
It is possible to get the config parameter from the Repository() which is
set in BaseFolder, so we set self.config there and remove the various
methods and 'config' parameters that are superfluous.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
We passed in the accountname to all derivatives of BaseFolder, such as
IMAPFolder(...,repository,...,accountname), although it is perfectly
possible to get the accountname from the Repository(). So remove this
unneeded parameter. Each backend had to define getaccountname() (although
the function is hardly used and most accessed .accountname directly).
On the other hand BaseFolder was using getaccountname but it never defined
the function. So make the sane thing, remove all definitions from backends
and define accountname() once in Basefolder. It was made a property and not
just a (public) attribute, so it will show up in our developer
documentation as public API.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
As all Folders share these parameters, we can safely handle them in
BaseFolder. This makes sense, as BaseFolder has a getname() function
that returns self.name but nothing actually set self.name.
It also saves a few lines of code.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
In getmessage() we were releaseing a connection when we detected a
dropped connection, but it turns out that this was not enough, we need
to explicitely discard it when we detect a dropped one. So add the
drop_conn=True parameter that was recently introduced to force the
discarding of the dead conection.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
The quickchanged() function was not handling dropped connections yet. If
IMAP4.select() throws a FOLDER_RETRY error, we will now discard the
connection, reconnect and retry.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
Beauty of code is probably a subjective measure, but this patch hopefully
is an improvement over the previous incarnation without changing
functionality.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
repository.BaseRepository().restore_atime() was testing in complex ways
that it only operates on a Maildir and that the 'restoreatime' setting
is set. This is unecessary, we can simply make the base implementation a
NoOp, and move the implementation to MaildirRepository().
This will save a tad of work for everyone doing IMAP<->IMAP
synchronization and simplify the code. Also document the functions.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
We only explicitly tested for 'yes' when we have a nice function to get
boolean settings which also works with Treu/False/NO, etc...
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
The readonly feature was introduced to safeguard repositories from
accidental modifications. Unfortunately, my patch treated the readonly
setting as a string and not as a boolean, so if *anything* was set in
the configuration file as 'readonly', this value evaluated to True
Fortunately this was safe, we never treated a repository that we wanted
read-only as read-write. We always treated them readonly if something
was configured as "readonly=..." even if that was False.
The fix is simply to use getconfboolean() rather than getconf() which
checks for True/False/On/Off/yes/no/1/0 and hands back the correct boolean.
Reported-by: Tomasz Nowak <nowak2000@poczta.onet.pl>
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
We rely on the number of mails being returned by the imapobj.select()
call, however that only happens if we "force" a real select() to occur.
Pass in the force parameter that I dropped earlier (we did not make use
of the return value when I dropped it, that is how it slipped through).
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
We were retrying indefinitely on imapobj.abort() (as that is what
imaplib2 suggests), but if the failure occurs repeatedly, we'll never
quit this loop. So implement a counter that errs out after unsuccessful
retries.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
Finally, actually discard dropped connections when we detect them as an
imapobj.abort() has been thrown. In this case, invoke releaseconnection
with drop_conn=True.
We don't need the self.aborted attribute to get signified of dropped
connections. An Execption during the noop will do.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
while True: if a: return
is equivalent to
while not a:
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
Variable name 'event' is as bad as it gets. Rename it to something that
actually describes what it is about.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
Add code documentation throughout the idle() function.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
Don't redefine the idle callback function on every run in the while
loop, define it once when we enter the function.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
Python 2.5 has no ssl module, and we can therefor not get the server
certificate for fingerprint verification. Add a check that disables
fingerprint verification for python 2.5.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
imaplib2 has changed internally to use self.sock for its ssl socket when
it used to be sslobj. Reflect that change.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
If we connect to a SSL server (not STARTTLS) and no CA cert has been
specified for verification, we check the configured SSL fingerprint and
bail out in case it has not been set yet, or it does not match.
This means one more mandatory option for SSL configuration, but it
improves security a lot.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
If maxage is set too large, we would even SEARCH for negative
years. With devastating results. So implement some sanity check and err
out in case the year does not make sense.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
We can use Imaplib's monthnames and shorten the construction of the date
by using them rather than hardcoding them again.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
Results are delivered in a 1-element list, and somehow I managed to drop
a [0] in the previous patches. We need to look at the element of course,
or our string splitting will fail horribly. Sorry this somehow slipped
through.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
If a folder is empty, most servers will return EXISTS 0 and imaplib2
passes back ['0'] as return value to a select(). It returns [None] if
no EXISTS response was given by the server at all.
Attempting to fetch the UIDs of 0 emails which leads to
various error messages (One server responds with "NO No matching
messages", Gmail seems to say "BAD Bad message sequence 1:*" for some
(although it is working fine for me with Gmail, so it might behave
different for different people).
In case we get an None or 0 back, we simply stop caching messages as the
folder is empty. This should fix the various error reports that have
popped up.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
Make sure that when a connection is dropped during append, we really
discard the broken connection and get a new one, retrying. We retry
indefinitely on the specific abort() Exception, as this is what imaplib2
suggests us to do.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
If a connection is broken, we want to have it really dropped and not be
reused. So far, we are checking the .Terminate attribute for this, but
according to the imaplib2 author, it is only set on normal shutdown and
it is an undocumented attribute whose meaning could change any time.
This patch introduces the parameter drop_conn which allows to tell
releaseconnection() that we really want to connection being dropped from
the pool of available connections and properly destroy it.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
Rather than output the full list of messages, coalesce it into number
ranges wherever possible.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
This function was badly named and completely undocumented. Rework it to
avoid copying the full UID list using an iterator. Make it possible to
hand it a list of UIDs as strings rather than implicitely relying on the
fact that they are numeric already. Document the code.
The behavior off the function itself remained otherwise unchanged.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
SEARCH and FETCH were never checking that the IMAP server actually
returned OK. Throw OfflineImapErrors at severity FOLDER in case one of
them fails.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
Some code cleanup. If we want to examine all messages of a folder, don't
try to find out how many there are and request a long list of all of them,
but simply request 1:*. This obliviates us from the need to force a select
even if we already had the folder selected and it requires us to send a
few less bytes over the wire.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
Do away with the wrapping of this code in a try...except KeyError, as
this code cannot conceivably throw a KeyError. Even if it could, it
should be documented why we should simply return() in this case.
Shorten some of the variable names and minor code cleanup while taking
the git blame anyway.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
Rather than passing in huge lists of continuous numbers which eventually
overflow the maximum command line length, we coalesce number ranges
before passing the UID sequence to SEARCH. This should do away with the
error that has been reported with busy mailing lists and 'maxage'.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
It is not needed. list(ALIST) will create a new copy of the list just
fine.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
Make sure that when a connection is dropped during append, we really
discard the broken connection and get a new one, retrying. We retry
indefinitely on the specific abort() Exception, as this is what imaplib2
suggests us to do.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
If a connection is broken, we want to have it really dropped and not be
reused. So far, we are checking the .Terminate attribute for this, but
according to the imaplib2 author, it is only set on normal shutdown and
it is an undocumented attribute whose meaning could change any time.
This patch introduces the parameter drop_conn which allows to tell
releaseconnection() that we really want to connection being dropped from
the pool of available connections and properly destroy it.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
When invoked with FETCH 1:* (UID), imaplib returns [None] for empty
folders. We need to protect against this case and simply 'continue' here.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
If a connection is dropped for some reason while fetching a message, the
imapobj.uid command throws an imapbj.abort() Exception which means we are
supposed to retry. Implement a fail loop that drops the connection, gets a
new one and attempts the command another time.
Remove obsolete comment that we need to catch nonexisting messages. We do
now.
GMail seems to drop connections left and right. This patch is a response to
the reported mail "4E5F8D8C.1020005@gmail.com" by zeek
<ezekiel.das@gmail.com>.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
Handle the case gracefully where a server has closed an IMAP connection
that we want to use for IDLEing. Simply have it dropped and get a new one
in this case. THis should get rid of the errors reported by John Wiegley
in mail id:"m2sjohd16t.fsf@gmail.com".
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
Imapserver.acquireconnection will succeed even whent the server connection
has been terminated and the first IMAP operation will throw an exception.
Often this is the folder SELECT operation (e.g. after an idle timeout), as
has been reported by John Wiegley. Catch this case and throw an
OfflineImapError with severity FOLDER_RETRY to notify consumers that they
are supposed to retry.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
In cases where processing a folder failed, but a retry might well succeed
e.g. when the server connection had simply timed out and was disconnected,
we can throw a FOLDER_RETRY (which is less severe than FOLDER).
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
Name parameter that hands us a Status Repository 'status_repo' and not
'copyfolders' as was before:
a) make it clear that we pass in a repository and not folder
instances. That was very confusing before.
b) We were always only using one 'copyfolders' item anyway, so let us
not make it a list.
Go through the list and make the variable nameing consistent:
dst_repo rather than dest (is it a folder?) to match the status_repo
naming scheme.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
To preserve previous behavior and save a few CPU cycles, we were not sorting UID
lists and only collapsed them if they were alreay sorted. Vincent pointed out
that this is not always the case and unsorted lists lead to non-optimally
collapsing.
Force lists to numeric types and sort them before collapsing.
Reported-by: Beffara <vbeffara@ens-lyon.fr>
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
We were using self.getfolderbasename(self.name) but the API is simply
getfolderbasename(). Fix this glitch.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
SafeConfigParser is very similar to the currently used ConfigParser but
it supports interpolation. This means values can contain format strings
which refer to other values in the same section, or values in a special
DEFAULT section. For example:
[My Section]
foodir: %(dir)s/whatever
dir=frob
would resolve the %(dir)s to the value of dir (frob in this case). All reference expansions are done on demand.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
as that method doesn't exist on sets. Rather call the inbuilt
sorted(flags). This fixes Exceptions being thrown when using the sqlite
backend.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
We were omitting an '%' where we needed it. Also include the traceback
information where it belongs in the new ui.error infrastructure.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
443 is of course the https and not the IMAPS standard port. Fix.
Thanks to Daniel Shahaf <d.s@daniel.shahaf.name> for the heads up.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
Commit e023f190b0 changed the storing of
file paths in the messagelist variable to be relative paths, but we were
using the full absolute path anyway as we missed one spot.
Adapt this and construct the full file path in the one place where we
need it.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
Rather than output the full list of messages, coalesce it into number
ranges wherever possible.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
This function was badly named and completely undocumented. Rework it to
avoid copying the full UID list using an iterator. Make it possible to
hand it a list of UIDs as strings rather than implicitely relying on the
fact that they are numeric already. Document the code.
The behavior off the function itself remained otherwise unchanged.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
As this is essentially what it is, a set of values. This allows as
to do set arithmetics to see, e.g. the intersection of 2 flag sets
rather than clunkily having to do:
for flag in newflags:
if flag not in oldflags:
oldflags.append(flag)
Also some more code documenting.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
Empty foldernames (as they could be created through nametrans) were
failing as the uidvalidity and status files names as determined by
folder/Base.py:getfolderbasename() lead to invalid file names ''.
Fix this by handling empty file names and translating them to '.' which
leads to the special file name 'dot'. (this special value existed before
and was not invented by this patch)
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
I changed the API to pass in a folder rather than a list of folders, but
used getnicename() on the wrong object. It is not used on the folder but
on the ui object. Fix this and give the variable somewhat better names.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
It works by fetching all headers of new messages from IMAP server and
searching for our X-OfflineIMAP marker by using regular expression.
Signed-off-by: Vladimir Marek <vlmarek@volny.cz>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
We only copy to a single folder anyway, so clean up the code to only
pass in a single folder.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
