If utf8foldernames is enabled on account level all folder names read
from the IMAP server will immediately be reencoded to UTF-8. Names
will be treated as UTF-8 as long as the IMAP server isn't contacted again,
for which they are reencoded to IMAP4-UTF-7.
This means that any further processing such as nametrans, folderfilter
etc. will act upon the UTF-8 names, which will have to be documented
carefully.
NOTE 1:
GMail repositories and folders inherit from the IMAP... classes, so I don't
know yet if these changes have ugly side-effects. But web research suggests
that GMail IMAP folders are equally encoded in UTF-7 so that should work
identically here and incorporate the same improvements.
NOTE 2:
I could not test the behaviour with idlefolders as I didn't get this option
to work at all, not even with the latest stable version.
NOTE 3:
I *did* test to sync an IMAP repository against another IMAP repository.
Signed-off-by: Urs Liska <git@ursliska.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
While intending *not* to change the behaviour of the existing
decodefoldernames option this commit transparently improves
the coding.
So far this worked by overriding the folder's getvisiblename() method
which reads self.visiblename from and applies the conversion on
*every* invocation of getvisiblename().
This commit does the calculation once in the IMAPFolder's __init__.
Signed-off-by: Urs Liska <git@ursliska.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
This commit adds two functions
- imaputil.IMAP_utf8()
- imaputil.utf8_IMAP()
as an interface to the new imap4_utf_7 codec.
Signed-off-by: Urs Liska <git@ursliska.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
If the config option `transporttunnel` is used the option `remotehost` is not
needed, because the tunnel provide the IMAP connection.
Signed-off-by: Thomas Merkel <tm@core.io>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
The support for the realdelete configuration option was removed because this
could lead to data loss.
See 51728ed to know more.
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
Some returned responses end with ')' rather than 'UID XXX)' as expected.
BTW, a better policy could be to request for the 'X-OfflineIMAP' header only
rather than fetching all the headers and looking for it manually.
Also:
- Strip the output when error occurs: we don't need the full response unless
'imap' debug mode is enabled.
- Improve the comments.
Github-ref: https://github.com/OfflineIMAP/offlineimap/issues/479
Tested-by: https://github.com/secomi
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
On each folder scan, we must compute the min_uid. Locally, this is done by
relying on the prefix timestamp in the filenames. If for whatever reason they do
not reflect the Date header of the email, changing maxage leads to undefined
behaviour.
To prevent from this, we rather rely on the remote folder. We assume that the
remotes are more reliable to provide correct sets of UIDs based on dates than we
are.
Github-ref: https://github.com/OfflineIMAP/offlineimap/issues/384
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
mbnames is initialized and written once in the run from OfflineImap.__sync().
However, the in-memory instance is fed with data at sync time for each folder
and the intermediate files are written as soon as all the folders are synced for
the account. All of this is done inside the SyncableAccount.__sync() method
while the syncrunner is looping on this.
This means that we duplicate entries for mbnames in each loop (most likely when
autorefresh is enabled).
It is wrong to have duplicates in mbnames for each account. Ignore duplicates
when adding data in the mbnames intermediate files.
Github-ref: https://github.com/OfflineIMAP/offlineimap/issues/467
Reported-and-tested-by: Shin Kojima <shin@kojima.org>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
Some users might use more than one python/imaplib version. This tends to make
debugging and support harder.
Displaying this information by default for each run should help.
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
Checking if we have to run this authentication method once it's already passed
to imaplib2 is too late. Make the checks at correct time, before we try the
authentication method. IOW, before we call
imapobj.authenticate('XOAUTH2', self.__xoauth2handler)
Github-ref: https://github.com/OfflineIMAP/offlineimap/issues/442
Tested-by: Klemens Schölhorn <klemens@schoelhorn.eu>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
Make sure that we refresh the screen atomically, since the emit()
function may be called by more that one threads at a time.
Also, modify the draw_bannerwin() method which used to fail in case the
window would become too small. Make sure that the provided offsets to
the window.addstr() method are properly bounded.
Closes#160: blinkenlights display is broken
Tested-by: Cyril Brulebois
Tested-by: Gaudenz Steinlin
Signed-off-by: Ilias Tsitsimpis <i.tsitsimpis@gmail.com>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
Stop the run when this option is found. Migrating from the historical plain
text status cache is still supported.
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
This would require more digging to understand how this is possible. I suspect
that a previous run has been interrupted.
Github-ref: https://github.com/OfflineIMAP/offlineimap/issues/445
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
Use a mutex to lock the sync transaction, uniquely identified by the remote
folder name.
Serializing the syncs prevents any IDLE thread from syncing the same folder of
a concurrent autorefresh thread. Othewise, we could download new messages
twice, or read "one message past the last one" which in some cases creates a
duplicated messages. Also prevents IDLE threads from reading new messages
before the autorefresh thread finishes synchronization.
Github-ref: #421
Originally-submitted-by: Michael Hohmuth <hohmuth@sax.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
According to documentation and the code, the following behavior is expected:
ipv6 = no
AF_INET is used
ipv6 = yes
AF_INET6 is used
ipv6 undefined
AF_UNDEF is used
Unfortunately the code parsing the "ipv6" configuration option was
returning "False" rather than "None" when failing to locate the option,
making it impossible to detect whether "ipv6" isn't set or if it was set
to "false" and leading offlineimap to use AF_INET for the connection.
This fixes the use of offlineimap on hosts that occasionaly are
connected to IPv6-only networks.
Signed-off-by: Stéphane Graber <stgraber@ubuntu.com>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
The saveall() method must acquire the lock to make writes.
Reported-and-tested-by: Julien Cubizolles <j.cubizolles@free.fr>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
systemd supports a watchdog (via the WatchdogSec service file option)
which will send the program a SIGABRT when the timer expires, however
currently this causes offlineimap to be killed immediately.
This patch registers SIGABRT and handles it in the same manner as
SIGUSR2, so that the current synchronisation is completed before the
program exits safely.
This makes offlineimap more flexible and robust for persistent setups
that make use of holdconnectionopen and autorefresh options.
For example, it may be useful in assisting with the occasional
situation where offlineimap may not return successfully after a suspend
and resume.
To make use of this, users could add the following to the [Service]
section of their systemd offlineimap service file (restart every 5
minutes):
Restart=on-watchdog
WatchdogSec=300
Signed-off-by: Chris Smart <mail@csmart.io>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
Allow retrying the download of messages more than twice.
Signed-off-by: Luke Kenneth Casson Leighton <lkcl@lkcl.net>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
Allow to use a another proxy for authentication than for IMAP.
Signed-off-by: Luke Kenneth Casson Leighton <lkcl@lkcl.net>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
Commit e51ed80e claims to add tilde and environment variable expansion
to multiple locations including Repository.localfolders. However, this
particular options seems to have been missed in that commit, and
apparently no one noticed till date
Signed-off-by: Darshit Shah <darnir@gmail.com>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
481efa95f6 is wrong to assume the local nametrans is set up and working.
Now, we correctly check that the local folder name is the same once both
nametrans are applied to itself. This check is only done when we have to create
the folder on remote.
Github-ref: https://github.com/OfflineIMAP/offlineimap/issues/413
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
When creating a folder on the remote, the status folder was created
using the remote folder name, but then Account assumed the statusfolder
name matched the local folder. Correct this.
Signed-off-by: Abdo Roig-Maranges <abdo.roig@gmail.com>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
Ensure we work on the correct names when coparing the structures.
This might revert changes made in 22641331c1 and would require mode
checks. However, having correct folder structure comparison is more important
than having the not official UTF-8 support.
Github-ref: https://github.com/OfflineIMAP/offlineimap/issues/405
Tested-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
The GMail repository added in 81b86fb has the restriction that you
can't override the host/port/ssl etc. There's no good reason for this,
and I'd like to use some of the defaults while connecting to GMail via
an stunnel, i.e.:
$ grep -v -e ^# -e ^$ .stunnel.work-gmail-imap
foreground = yes
debug = info
pid =
[work-imap-gmail-ssl-tunnel]
client = yes
accept = 127.0.0.1:1431
connect = imap.gmail.com:993
delay = yes
And then in my .offlineimaprc:
type = Gmail
remotehost = localhost
remoteport = 1431
ssl = no
While I was at it I also allowed overriding all the other previously
hardcoded options, e.g. the "oauth2_request_url" can now be overridden
to e.g. a local non-https proxy to sniff & debug the traffic going
over the wire.
This doesn't break any existing configuration, since we still use the
provided defaults. It just allows odd uses like my own to use this
repository while e.g. not having to supply "trashfolder", "spamfolder"
& "oauth2_request_url". While I'm at it document in the
offlineimap.conf that we're setting those options to defaults in this
repository.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
get_os_name returns linux-opensuse on OpenSUSE, so add a line for linux-opensuse to __DEF_OS_LOCATIONS.
Signed-off-by: Michael Hohmuth <hohmuth@sax.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
sync_folder_structure wasn't applying utf7 decoding before comparing
folders.
This is a minimal fix that only modifies one function so it doesn't
interfere with rest of the code.
Signed-off-by: Stéphane Albert <sheeprine@oh.its.fake.nullplace.com>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
Using standard offlineimap without specific utf8 nametrans makes
offlineimap crash when generating md5 of the folder because the
foldername is already an str.
Signed-off-by: Stéphane Albert <sheeprine@oh.its.fake.nullplace.com>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
This should significantly improve performance when used to write large
amounts of messages.
This feature is enabled through the fsync configuration option.
Code refactorize around fsync.
This addresses #390 (although it doesn't necessarily fix all instances
of that problem yet).
Github-ref: https://github.com/OfflineIMAP/offlineimap/issues/390
Originally-written-by: Giel van Schijndel <me@mortis.eu>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
If the map file is not properly written (e.g. due to unexpected kill)
offlineimap might wrongly consider some UIDs to have been deleted from the local
side which could lead to data loss.
Use a temporary map file rather than writing to the map file directly.
Github-ref: https://github.com/OfflineIMAP/offlineimap/issues/380
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
Do not call resizeterm(), unless is_term_resized() returns True. This
breaks the busy-loop where resizeterm() pushes a KEY_RESIZE onto the
FIFO causing the screen to be redrawn indefinitely (Issue #290).
Also, clear and refresh the main window after it has been resized. This
hopefully fixes the problem where Blinkenlights UI becomes unreadable
after terminal resize (Issue #160).
Closes#160: blinkenlights display is broken
Closes#290: ncurses flicker with blinkenlights UI
Bug-Debian: https://bugs.debian.org/671087
Bug-Debian: https://bugs.debian.org/809676
Signed-off-by: Ilias Tsitsimpis <i.tsitsimpis@gmail.com>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
The `threadutil` module depends on the `ui` module, which cycle depends
on `threadutil` through the `Curses` module.
The `ui` module had been loaded before the `threadutil` module, breaking
the above circular dependency, but this was changed in a recent code
refactoring, preventing the `Curses` module from being loaded with the
following exception:
File "./offlineimap.py", line 23, in <module>
from offlineimap import OfflineImap
File "offlineimap/offlineimap/__init__.py", line 20, in <module>
from offlineimap.init import OfflineImap
File "offlineimap/offlineimap/init.py", line 30, in <module>
from offlineimap import globals, threadutil, accounts, folder, mbnames
File "offlineimap/offlineimap/threadutil.py", line 25, in <module>
from offlineimap.ui import getglobalui
File "offlineimap/offlineimap/ui/__init__.py", line 28, in <module>
from offlineimap.ui import Curses
File "offlineimap/offlineimap/ui/Curses.py", line 27, in <module>
from offlineimap.threadutil import ExitNotifyThread
ImportError: cannot import name ExitNotifyThread
Fix the above error by ensuring that the `ui` module gets loaded before
the `threadutil` module. Please note that the above fix is temporary,
and we should refactor the modules to not have circular dependencies.
Bug-Debian: https://bugs.debian.org/839862
Reported-by: Neil McGovern <neilm@debian.org>
Signed-off-by: Ilias Tsitsimpis <i.tsitsimpis@gmail.com>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
BaseFolder now exposes an __unicode__ method so that function needing
unicode transcoding don't crash due to ascii encoding errors.
Signed-off-by: Stéphane Albert <sheeprine@oh.its.fake.nullplace.com>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
Don't pass the account name to the function returned by eval. This allows the
user to define his own arguments.
This fix the code according to the documentation provided in offlineimap.conf.
Github-fix: https://github.com/OfflineIMAP/offlineimap/issues/372
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
To further ensure that messages are synchronized strictly in UID
order, this option can be set to cause only one thread to be used
to synchronise an individual folder, though other folders may
be synchronized simultaneously by other threads.
Signed-off-by: James E. Blair <corvus@gnu.org>
Based-on-patch-by: James E. Blair <corvus@gnu.org>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
Return a sorted list of UIDs in getmessageuidlist.
Some MUAs (and their users) like to display messages in UID order
(or "order received"). If offlineimap is used in IMAP<->IMAP mode,
then the order messages are received by the second IMAP server will
be different because offlineimap iterates over a UID list produced
from the keys of a dictionary, which is unsorted.
This change sorts that list of UIDs so that both IMAP servers will
have their messages in the same order (except those times where
messages are appended to folders on both repositories between
syncs).
Signed-off-by: James E. Blair <corvus@gnu.org>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
This suppressing the warning generated when running offlineimap on
python2 with -3 switch:
offlineimap/folder/Base.py:29: DeprecationWarning: Overriding __eq__
blocks inheritance of __hash__ in 3.x
Since this object is mutable it should not be hashable.
From Python documentation[1]:
A class that overrides __eq__() and does not define __hash__() will
have its __hash__() implicitly set to None.
Therefore old behaviour is preserved.
[1] https://docs.python.org/3/reference/datamodel.html
Signed-off-by: Łukasz Żarnowiecki <dolohow@outlook.com>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
It is more readable and returns a list.
This continues work done in 19c4330.
Signed-off-by: Łukasz Żarnowiecki <dolohow@outlook.com>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
This was causing the error message "not all arguments converted during
string formatting." Specifically:
```
% offlineimap -u machineui
OfflineIMAP 7.0.4
Licensed under the GNU GPL v2 or any later version (with an OpenSSL exception)
msg:protocol:MainThread:7.2.0
msg:initbanner:MainThread:OfflineIMAP+7.0.4%0A++Licensed+under+the+GNU+GPL+v2+or+any+later+version+%28with+an+OpenSSL+exception%29
msg:registerthread:Account+sync+MYHOST:MYHOST
msg:acct:Account+sync+MYHOST:MYHOST
error::Account+sync+MYHOST:ERROR%3A+While+attempting+to+sync+account+%27MYHOST%27%0A++not+all+arguments+converted+during+string+formatting
msg:acctdone:Account+sync+MYHOST:MYHOST
msg:threadExited:MainThread:Account+sync+MYHOST
msg:unregisterthread:MainThread:Account+sync+MYHOST
msg:terminate:MainThread:0%0A%0A
```
Signed-off-by: Christopher League <league@contrapunctus.net>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
Otherwise, it might be impossible to know which account is connecting when more
than one is syncing.
Code style.
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
They introduce a regression not allowing to discard the XOAUTH2 method when
expected.
The default lambda did not take the "account_name" argument.
Github-fix: https://github.com/OfflineIMAP/offlineimap/issues/362
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
OfflineIMAP frequently delivers mail files to the Maildir consisting exclusively
of a single ASCII digit in IDLE mode. IMAPFolder.getmessage expects 'data' to be
of the form
[(fetch-info, message-body)]
However, the imapobj.uid call in getmessage returns a list of *all* pending
untagged FETCH responses. If any message flags were changed in the selected
IMAP folder since the last command (by another client or another thread in
OfflineIMAP itself), the IMAP server will issue unsolicited FETCH responses
indicating these flag changes (RFC3501, section 7). When this happens, 'data'
will look like, for example
['1231 (FLAGS (\\Seen) UID 5300)',
'1238 (FLAGS (\\Seen) UID 5318)',
('1242 (UID 5325 BODY[] {7976}', message-body)]
Unfortunately, getmessage retrieves the message body as data[0][1], which in
this example is just the string "2", and this is what gets stored in the mail
file.
Multi-threaded OfflineIMAP with IDLE or holdconnectionopen is particularly
susceptible to this problem because flag changes synced back to the IMAP server
on one thread will appear as unsolicited FETCH responses on another thread if it
happens to have the same folder selected. This can also happen without IDLE or
holdconnectionopen or even in single-threaded OfflineIMAP with concurrent access
from other IMAP clients (webmail clients, etc.), though the window for the bug
is much smaller.
Ideally, either imaplib2 or getmessage would parse the fetch responses to find
the response for the requested UID. However, since IMAP only specifies
unilateral FETCH responses for flag changes, it's almost certainly safe to
simply find the element of 'data' that is a tuple (perhaps aborting if there is
more than one tuple) and use that.
Github-fix: https://github.com/OfflineIMAP/offlineimap/issues/162
Based-on-patch-by: Austin Clements <amdragon@MIT.EDU>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
Commit 6b28071b0f makes the check once nametrans is applied. This is wrong
because separators are valid characters in names returned by nametrans. E.g:
"Sent" -> "[Gmail]/Sent"
Make the check against the raw name of the folder, instead.
Github-fix: https://github.com/OfflineIMAP/offlineimap/issues/353
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
1. There is one database per folder and sqlite requires to serialize the
writings. Instead of locking at LocalStatusSQLiteFolder object level, introduce
a new DatabaseFileLock object which is shared across threads. This fixes the
concurrent writes issues that some users might experience by duplications or
flags restored to the previous state.
2. Close the database only when we are sure no other threads will use the
connection on a *per-file* basis. Previous fix 677afb8d8f is wrong
because the same lock is shared for all the databases.
Github-fix: https://github.com/OfflineIMAP/offlineimap/issues/350
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
1. There is one database per folder and sqlite requires to serialize the
writings. Instead of locking at LocalStatusSQLiteFolder instance level,
introduce a new DatabaseFileLock object which is shared across threads. This
fixes the concurrent writes issues that some users might experience by
duplications or flags restored to the previous state.
2. Close the database only when we are sure no other threads will use the
connection on a *per-file* basis. Previous fix 677afb8d8f is wrong
because the same lock is shared for all the database files.
Github-fix: https://github.com/OfflineIMAP/offlineimap/issues/350
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
This did not work and is not usefull since the purge() method was introduced in
1410a391bc. Actually, the purge() does what deletemessagelist() was supposed to
achieve.
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
It's required to have more than one connection to the database for the
maxconnections configuration option to work with threads. However,
connection.close() is closing all the connections. Only close the connection
when no more thread need it.
Github-fix: https://github.com/OfflineIMAP/offlineimap/issues/350
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
It's required to have more than one connection to the database for the
maxconnections configuration option to work with threads. However,
connection.close() is closing all the connections. Only close the connection
when no more thread need it.
Backported-from: 856b74407bd7f634cae5a8c2d9b84e13d14c12d2
Github-fix: https://github.com/OfflineIMAP/offlineimap/issues/350
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
This is usefull to remove dangling entries for removed accounts or if mbnames is
not enabled anymore.
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
Output a warning so that we can dig into this. For now, the patch doesn't fix
the root cause. If the server returns UID 0 as valid UID number, this must be
ignored as soon as possible.
Github-ref: https://github.com/OfflineIMAP/offlineimap/issues/336
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
When a maildir is removed it must be considered new for the sync. However, the
local cache of the folder remains. This means the sync of the folder removes all
the missing emails.
Avoid loosing of data for users not aware of the local cache by removing any
pre-existing status cache of a folder when we actually want to create the
database.
Improve style.
Github-fix: https://github.com/OfflineIMAP/offlineimap/issues/333
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
- Learn to support UTF-8 characters where it was not supported for usernames and
passwords (but for netrc).
- Fix the types in the code for both py2 and py3: we now expect unicode for
usernames and passwords.
Unicode (UTF-8) is required only for variables with non-ASCII characters.
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
Make mbnames to work with intermediate files, one per account, in the JSON
format. The mbnames target is built from those intermediate files.
Github-Fix: https://github.com/OfflineIMAP/offlineimap/issues/66
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
- Expose more literals.
- Fix a type to bytes.
- Fix comment.
Changes submitted upstream by Łukasz and me.
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
Backported from 8e995a69bfa003ab822b55731429d84b3bc5626f.
We currently close the database as soon as possible while we handle the status
backend but this is still too early because autorefresh induces looping on this
code block.
Instead of delaying the closing outside of the loop, it's easier to delay the
opening as late as possible (inside the loop). The downside is that the database
is opened/closed more than once when autorefresh is enabled. The good news is
that this make the code much easier.
Fixes regression introduces by 6fb5700.
Reported-by: Łukasz Żarnowiecki <dolohow@outlook.com>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
The virtual imaplib2 first try to import imaplib2 when provided by the system.
If not provided or if the version is not supported, fallback on the bundled
imaplib2 version.
Distribution maintainers can now easily remove the bundled imaplib2 version if
they want to get it packaged outside of offlineimap.
We still want to provide imaplib2 by default because:
- this library is neither in Python core nor packaged by a lot of distributions;
- users expect to be able to run offlineimap by just downloading the tarball or
after a git clone.
In order to avoid unexpected (too old) versions of imaplib2, we restrict the
supported versions of this librabry.
Reviewed-by: Łukasz Żarnowiecki <dolohow@outlook.com>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
Be aware upstream has two versions of both 2.52 and 2.53.
This bump change is from
commit a205409a0047732840505e534c07d8d85d2644a1
Author: Piers Lauder <piers@janeelix.com>
Date: Sun Dec 27 20:55:04 2015 +1100
Back out BINARY changes - not implemented correctly.
to
commit 0596e7372fd3556d27ea55510b1e8cfa8370ec43
Author: Piers Lauder <piers@janeelix.com>
Date: Fri Jun 3 11:58:40 2016 +1000
new version of imaplib2.py
Original-imaplib2-patch-by: Łukasz Żarnowiecki <dolohow@outlook.com>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
This patch fixes the situation when "localfolders" specifies path that
is more that one level deep and top directory does not exists. Example
would be "localfolders = ~/Mail/a". This especially relevant on the
first run.
In that case we would end up with unhandled exception causing
unexpected termination of the program.
Thread 'Account sync test' terminated with exception:
Traceback (most recent call last):
File "/offlineimap/offlineimap/threadutil.py", line 172, in run
Thread.run(self)
File "/usr/lib/python2.7/threading.py", line 754, in run
self.__target(*self.__args, **self.__kwargs)
File "/offlineimap/offlineimap/accounts.py", line 258, in syncrunner
self.localrepos = Repository(self, 'local')
File "/offlineimap/offlineimap/repository/__init__.py", line 82, in __new__
return repo(name, account)
File "/offlineimap/offlineimap/repository/Maildir.py", line 40, in __init__
os.mkdir(self.root, 0o700)
OSError: [Errno 2] No such file or directory: '/Mail/a'
By replacing call to "mkdir" with "makedirs" we can simply create
directories recursively.
Signed-off-by: Łukasz Żarnowiecki <dolohow@outlook.com>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
Some servers are broken: they return zero as valid UID and respond "BAD invalid
parameter: 0" on the FETCH command.
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
There is no other way to make Python2 and Python3 happy, because syntax
raise E, V, T is incompatible with the latter.
Signed-off-by: Łukasz Żarnowiecki <dolohow@outlook.com>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
Python3 accepts binary input for md5 function.
This patch is known to break setups using folder names not strictly conforming
the IMAP UTF-7 encoding. We always made it clear that such setup is unsupported
and might be broken at some point in time. See documentation about
'decodefoldernames' in the provided configuration file. This is why this patch
is considered introducing no regression for this use case.
Patches to support both Python 3 and Python 2 by re-encoding the MD5 in the
filenames are welcome. This likely requires a new CLI option to allow
backporting the feature for users downgrading or changing of Python environment.
Signed-off-by: Łukasz Żarnowiecki <dolohow@outlook.com>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
We currently close the database as soon as possible while we handle the status
backend but this is still too early because autorefresh induces looping on this
code block.
Instead of delaying the closing outside of the loop, it's easier to delay the
opening as late as possible (inside the loop). The downside is that the database
is opened/closed more than once when autorefresh is enabled. The good news is
that this make the code much easier.
Fixes regression introduces by 6fb5700.
Reported-by: Łukasz Żarnowiecki <dolohow@outlook.com>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
With a maxsize to the Queue of threads we are introducing a blocking call while
adding new threads.
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
In Python3, zip returns iterator instead of list.
Signed-off-by: Łukasz Żarnowiecki <dolohow@outlook.com>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
xrange was removed in Python3 while range exists in boths versions.
Signed-off-by: Łukasz Żarnowiecki <dolohow@outlook.com>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
There is no such method in Python3 any more.
Signed-off-by: Łukasz Żarnowiecki <dolohow@outlook.com>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
It is more readable and returns a list therefore it is compatible both
with Python 2 and 3.
Signed-off-by: Łukasz Żarnowiecki <dolohow@outlook.com>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
"imapobj.search" returns a list with one string element of numbers
separated by one whitespace character for regular box (GMail, AOL...).
['1 2 3 4 5 6 7 8 9 10 11 12']
But if we would like to sync from Davmail it would return a list of
numbers.
['1', '2', '3', '4', '5', '6', '7', '8', '9', '10', '11', '12'].
The code "return res_data[0].split()" in the first case will return what
we already have when using Davmail, hence only one email will be
fetched. But if only the first sync would be with maxage the emails
will be removed, because offlineimap will think that they were removed
by us.
The patch distinguishes between syncing with Davmail and regular box and
applies split on the first element only when it finds whitespace
character. It also handles the case when the first element is empty on
first sync.
Closes#327
Signed-off-by: Łukasz Żarnowiecki <dolohow@outlook.com>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
Sometimes it might happen that you put wrong date and you except emails
to be fetched, but they are not and you do not have an idea why.
By raising exception the user will see a proper message telling that he
used the wrong date for maxage/startdate property.
If someone wants to set a future date intentionally might as well sync
in the future.
Signed-off-by: Łukasz Żarnowiecki <dolohow@outlook.com>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
This enables the "append" mode feature. Configuration option is sync_deletes in
both local and remote repositories. Marked EXPERIMENTAL and UNTESTED.
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
Introduce the '--migrate-fmd5-using-nametrans' option which migrates the
FMD5 hashes from versions prior to 6.3.5.
It seems that commit 'Apply nametrans to all Foldertypes' (6b2ec956cf)
introduced a regression because it changed the FMD5 part of the filename
calculated by OfflineIMAP. Thus, OfflineIMAP believes that the messages
has been removed and adds them back.
For more information, see:
http://www.offlineimap.org/configuration/2016/02/12/debian-upgrade-from-jessie-to-stretch.html
Bug-Debian: https://bugs.debian.org/812108
Reported-by: François <francois@avalenn.eu>
Signed-off-by: Ilias Tsitsimpis <i.tsitsimpis@gmail.com>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
Some environments that return AAAA records for their IMAP servers can pose
problems for clients that do not have end-to-end IPv6 connectivity for a number
of reasons (e.g. policy, lack of full routing, security, etc..)
Even with a fallback mechanism in place, you can still arrive at IMAP
implementations that could prevent authentication from unknown IPv6 space. This
in itself is not enough to fallback to IPv4 since there is an actual connection
on that socket.
This change is for introducing a user-defined value:
[Repository imap-remote]
ipv6 = no
to create a preference per repository on which AF to connect to the remote
server on
ipv6 = yes (AF_INET6)
ipv6 = no (AF_INET)
unspecified = default
Signed-off-by: Ebben Aries <e@dscp.org>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
Since this is used in an except calse, we first don't mask the real cause and
raise the original error.
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
By default, OfflineIMAP catches SIGTERM/SIGHUP/SIGINT and attempts to
gracefully terminate as soon as possible. Allow the user to abort
immediately, by hitting Ctrl-C several times.
Bug-Debian: https://bugs.debian.org/679975
Signed-off-by: Ilias Tsitsimpis <i.tsitsimpis@gmail.com>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
This reverts commit a1dc76ae91.
Causes a crash when using Blinkenlights UI with -l CLI option.
$ ./offlineimap.py -c offlineimap.conf.minimal -u blinkenlights -l foo
Traceback (most recent call last):
File "./offlineimap.py", line 36, in <module>
oi.run()
File "/tmp/offlineimap/offlineimap/init.py", line 50, in run
options, args = self.__parse_cmd_options()
File "/tmp/offlineimap/offlineimap/init.py", line 205, in __parse_cmd_options
self.ui.setlogfile(options.logfile)
File "/tmp/offlineimap/offlineimap/ui/UIBase.py", line 119, in setlogfile
self.logger.info(msg)
File "/usr/lib/python2.7/logging/__init__.py", line 1159, in info
self._log(INFO, msg, args, **kwargs)
File "/usr/lib/python2.7/logging/__init__.py", line 1278, in _log
self.handle(record)
File "/usr/lib/python2.7/logging/__init__.py", line 1288, in handle
self.callHandlers(record)
File "/usr/lib/python2.7/logging/__init__.py", line 1328, in callHandlers
hdlr.handle(record)
File "/usr/lib/python2.7/logging/__init__.py", line 751, in handle
self.emit(record)
File "/tmp/offlineimap/offlineimap/ui/Curses.py", line 305, in emit
color = self.ui.gettf().curses_color
AttributeError: 'CursesLogHandler' object has no attribute 'ui'
Reported-by: iliastsi
Github-issue: #293
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
The retry loop would release connection that would get
re-released upon ``finally`` clause. In consequence, an
exception would be cast.
Signed-off-by: Valentin Lab <valentin.lab@kalysto.org>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
This fix does not apply when any keyword in configured which is already
harmless.
Written-by: Igor Almeida <igor.contato@gmail.com>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
Extract the flag/keyword translation and combination logic to a
function.
Signed-off-by: Igor Almeida <igor.contato@gmail.com>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
This uses the destination folder's keyword mapping to translate the
message's keywords into some appropriate format.
Tested only with local Maildir.
Signed-off-by: Igor Almeida <igor.contato@gmail.com>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
The keywords are in the flag string, so imaputil can just strip the
usual \Flags.
Signed-off-by: Igor Almeida <igor.contato@gmail.com>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
This commit assembles a dictionary mapping user-specified IMAP keywords
to Maildir lower-case flags, similar to Dovecot's format
http://wiki2.dovecot.org/MailboxFormat/Maildir
Configuration example:
[Repository Local]
type = Maildir
localfolders = ~/Maildir/
customflag_a = $label1
customflag_b = $Forwarded
customflag_c = Junk
Signed-off-by: Igor Almeida <igor.contato@gmail.com>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
Remove filtering that was previously done to avoid errors in flag
handling.
Signed-off-by: Igor Almeida <igor.contato@gmail.com>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
Note that the stacks are grouped if similar, and the current
process (the one handling the signal) is identified and reports
where it was before the signal.
This can be quite handy when wanting to debug thread locks for
instance.
Signed-off-by: Valentin Lab <valentin.lab@kalysto.org>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
If this value is true, use (if possible) a timestamp based on message
Date or Delivery-date headers. The current system time is used
otherwise.
filename_use_mail_timestamp and utime_from_header are now completely
separated option that do not interfere one with other.
To handle this feature in a multithread context we use a hash to count
the number of mail with the same timestamp. This method is more accurate
than using the old lasttime and timeseq variables.
Signed-off-by: Sébastien Gross <seb•ɑƬ•chezwam•ɖɵʈ•org>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
Rather than having an option for syslog output, make a separate UI
option.
Signed-off-by: Ben Boeckel <mathstuf@gmail.com>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
Handle case where email's internal time is erroneously so large as to
cause overflow errors when setting file modification time with
utime_from_header = true.
Reported-by: Cameron Simpson <cs@zip.com.au>
Signed-off-by: Janna Martl <janna.martl109@gmail.com>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
Allow the user to block usage of known-bad versions of SSL and TLS.
Signed-off-by: Ben Boeckel <mathstuf@gmail.com>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
Return value set to 1 if sync failed and error is thrown. Otherwise set to 0 if successful.
Signed-off-by: Prashant Sachdeva <sachdevp@cs.ubc.ca>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
When new mail arrives, this hook is triggered, allowing the user to
play a sound, or launch a popup.
Signed-off-by: Matthew Krafczyk <krafczyk.matthew@gmail.com>
Since skipping a folder means no new data is downloaded, the UID validity
problem is a backup failure. Make it possible to alert or work around
it in scripts by signaling with the exit code.
Signed-off-by: Alex Kapranoff <alex@kapranoff.ru>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
Now it is possible to handle failed syncs in scripts.
Signed-off-by: Alex Kapranoff <alex@kapranoff.ru>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
1. When using maxage, local and remote messagelists are supposed to only
contain messages from at most maxage days ago. But local and remote used
different timezones to calculate what "maxage days ago" means, resulting
in removals on one side. Now, we ask the local folder for maxage days'
worth of mail, find the lowest UID, and then ask the remote folder for
all UID's starting with that lowest one.
2. maxage was fundamentally wrong in the IMAP-IMAP case: it assumed that
remote messages have UIDs in the same order as their local counterparts,
which could be false, e.g. when messages are copied in quick succession.
So, remove support for maxage in the IMAP-IMAP case.
3. Add startdate option for IMAP-IMAP syncs: use messages from the given
repository starting at startdate, and all messages from the other
repository. In the first sync, the other repository must be empty.
4. Allow maxage to be specified either as number of days to sync (as
previously) or as a fixed date.
Signed-off-by: Janna Martl <janna.martl109@gmail.com>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
Previously, syncing labels on a message always resulted in updating the
file modification time, even with utime_from_headers=true
This patch restores the file mtime to the previous value when
utime_from_headers=true, preventing a label synchronization from
breaking the promise that the file mtimes coincide with the header date.
Signed-off-by: Abdo Roig-Maranges <abdo.roig@gmail.com>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
We were using rtime for two different purposes:
- to store remote internal date
- to use in the utime_from_header option
Let's decouple the utime_from_header logic from rtime, now rtime means
remote internal date.
Signed-off-by: Abdo Roig-Maranges <abdo.roig@gmail.com>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
Upstream bug has been fixed, since imaplib2 v2.42 the untagged responses are
flushed (as stated by the documentation).
See https://sourceforge.net/p/imaplib2/bugs/7/
Signed-off-by: Pierre-Louis Bonicoli <pierre-louis.bonicoli@gmx.fr>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
This partially reverts commit 25513e9038.
Only changes about dates and times are reverted. The changes about the style are
kept.
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
The basic problem is in the context of syncing multiple accounts where
one is fast and the others are slower (due to the number of folders).
When the fast account completes, the other accounts are partially written
through the list and if the file is read during this time, the list can
be useless. However, in the general case, the file is probably left
around from a previous run of offlineimap and is more correct, so add an
option to leave it alone until all syncing is done.
Incremental is still the default since this running offlineimap using
its own timer setup is likely the most common setup. Turning it off
works best with one-shot mode triggered by cron or systemd timers.
Signed-off-by: Ben Boeckel <mathstuf@gmail.com>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
Fix regresssion introduced in 428349e3.
Prevent messages with UID's already in the destination folder from getting
excluded from the copy list.
Signed-off-by: Janna Martl <janna.martl109@gmail.com>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
Some messages were excluded from the copy/delete list after the UI message said
they were copied/deleted.
Also fix Internaldate2epoch(), which was wrong.
Signed-off-by: Janna Martl <janna.martl109@gmail.com>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
Suppose messages A and B were delivered to the remote folder at
"maxage + 1" days ago.
A was downloaded to the local folder "maxage + 1" days ago, but B was only
downloaded "maxage - 1" days ago (contrived scenario to illustrate the two
things that could happen). The behavior was that B gets deleted from the local
folder, but A did not. The expected behavior is that neither is deleted.
Starting where Base.py: __syncmessagesto_delete(self, dstfolder, statusfolder)
is called where:
- self is the remote folder
and
- dstfolder is the local folder.
It defines deletelist to be the list of messages in the status folder
messagelist that aren't in the remote folder messagelist with
not self.uidexists(uid)
A and B are both in the status folder. They're also both *NOT* in the remote
folder messagelist: this list is formed in IMAP.py: cachemessagelist(), which
calls _msgs_to_fetch(), which only asks the IMAP server for messages that are
"< maxage" days old.
Back to Base.py __syncmessagesto_delete(), look at the call
folder.deletemessages(deletelist), where folder is the local folder. This ends
up calling Maildir.py deletemessage() for each message on the deletelist. But we
see that this methods returns (instead of deleting anything) if the message is
in the local folder's messagelist. This messagelist was created by Maildir.py's
cachemessagelist(), which calls _scanfolder(), which tries to exclude messages
based on maxage. So at this point, we *WANT* A and B to be excluded -- then they
will be spared from deletion. This maxage check calls _iswithinmaxage(), and
actually does the date comparison based on the time found at the beginning of
the message's filename. These filenames were originally created in Maildir.py's
new_message_filename(), which calls _gettimeseq() to get the current time (i.e.
the time of retrieval).
Upshot: A's filename has an older timestamp than B's filename. A is excluded
from the local folder messagelist in _scanfolder(), hence spared from deletion
in deletemessage(); B is not excluded, and is deleted.
This patch does not address the timezone issue. As for the IMAP/timezone issue,
a similar issue is discussed in the thunderbird bug tracker here:
https://bugzilla.mozilla.org/show_bug.cgi?id=886534
In the end, they're solving a different problem, but they agree that
there is really no reliable way of guessing the IMAP server's internal
timezone.
Signed-off-by: Janna Martl <janna.martl109@gmail.com>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
Read proxy option in imapserver, instantiate a class in imaplibutil
using a self-defined keyword and a socket instance, and use this socket
instance to substitute the default socket instance used in imaplib2.
Signed-off-by: 夏恺(Xia Kai) <xiaket@gmail.com>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
Get real tracebacks (at the point that calls Request.abort()
and not from the point that handles collected abort requests)
and pass them to our calling functions to ease debugging
of user problems.
Signed-off-by: Eygene Ryabinkin <rea@codelabs.ru>
This simplifies logics for the user, especially if he uses both
fingerprint and certificate validation: it is hard to maintain
the compatibility with the prior behaviour and to avoid getting
default CA bundle to be disabled when fingerprint verification
is requested.
See
http://thread.gmane.org/gmane.mail.imap.offlineimap.general/6695
for discussion about this change.
Default CA bundle is requested via 'sslcertfile = OS-DEFAULT'.
I had also enforced all cases where explicitely-requested CA bundles
are non-existent to be hard errors: when users asks us to use CA
bundle (and, thus, certificate validation), but we can't find one,
we must error out rather than happily continue and downgrade to
no validation.
Reported-By: Edd Barrett <edd@theunixzoo.co.uk>
Reviewed-By: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
Signed-off-by: Eygene Ryabinkin <rea@codelabs.ru>
We have no variable "fullname", it must have been slipped in
unintentionally.
Blame commit:
0f40ca4799 more style consistency
Signed-off-by: Eygene Ryabinkin <rea@codelabs.ru>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
The note tells people to look at the source of the method, which
spinx.ext.viewcode conveniently links right next to the methods
signature.
Signed-off-by: Wieland Hoffmann <themineo@gmail.com>
We usually mutate some exceptions to OfflineImapError() and it is
a whole lot better if such exception will show up with the original
traceback, so all valid occurrences of such mutations were transformed
to the 3-tuple form of "raise". Had also added coding guidelines
document where this re-raise strategy is documented.
Signed-off-by: Eygene Ryabinkin <rea@codelabs.ru>
CustomConfigParser.getlocaleval() loads "pythonfile" at each call.
Besides unnecessary IO, in case that dynamic_folderfilter is true, the
code in "pythonfile" would behave stateless, since it is re-initialized
at each call of getlocaleval(), i.e., at every sync. Fix that by keeping
a singleton copy of localeval in CustomConfigParser after the first call
of getlocaleval().
Signed-off-by: Stefan Huber <shuber@sthu.org>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
Otherwise, messages logged through UIBase.error would only be passed to
UIBase._msg, which only logs at INFO. This causes error to not get
logged at all for the quit UI.
Signed-off-by: Wieland Hoffmann <themineo@gmail.com>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
This fixes a bug in which a message ended up with multiple gmail labels
header (X-Keywords or so). Fix fix it by removing all labels headers
before adding the updated one.
Signed-off-by: Abdo Roig-Maranges <abdo.roig@gmail.com>
There should be just one header storing gmail labels, but due to a bug,
multiple X-Keywords (or equivalent) headers may be found on the local
messages.
Now we, when extracting the labels from a message, we read all label
headers, instead of just the first one.
This has the consequence that some old labels stored locally in a second
X-Keywords (or third...) header, which effectively was rendered
invisible to offlineimap until now, may pop back up again and be pushed
to gmail. No labels will be removed by the changes in this commit,
though.
Signed-off-by: Abdo Roig-Maranges <abdo.roig@gmail.com>
It is a bit cleaner than making chains of calls like
{{{
value = os.path.expanduser(value)
value = os.path.abspath(value)
}}}
since we do see all transformations to be applied in a single
iterable and have no repeated code like in the above example.
Signed-off-by: Eygene Ryabinkin <rea@codelabs.ru>
- Multi-line documentation for functions and methods
now has ending triple-double-quotes on an own line,
as per PEP 257.
- Added documentation and comments to almost all functions
and methods.
- Added stub implementations for getconfig() and getsection()
inside CustomConfig.ConfigHelperMixin to provide sane
run-time diagnostics for classes that doesn't implement them.
Signed-off-by: Eygene Ryabinkin <rea@codelabs.ru>
The GNU GPL and the OpenSSL license are incompatible. Some distributions
take a hardline stance and do not consider OpenSSL to be a systems library
(which would permit the usage/distribution of OpenSSL) when distributing
apps such as OfflineImap from the same repository. In order to solve these
distributions dilemma, we add the OpenSSL exception to our GNU GPL v2+ license.
This allows for unambiguous use/distribution of our GNU GPL'ed application
with a python linking to openssl.
Consent of all contributors has been requested via email by
Sebastian@SSpaeth.de. With very few exceptions of minor contributions (which
might or might not by copyright-worthy) all past contributors have consented
to adding the OpenSSL exception. None of the replying authors has disagreed
with adding the exception.
The corresponding issues at question:
https://github.com/OfflineIMAP/offlineimap/issues/104
Debian bug #747033
We are still missing consent from:
1 Asheesh Laroia
2 Bart Kerkvliet
4 Daniel Burrows
5 David Favro
1 David Logie
1 Eric Dorland
1 Ethan Schoonover
49 Eygene Ryabinkin
1 Loui Chang
1 Luca Capello
1 Michael Witten
2 Mike Dawson
1 Peter Colberg
1 Scott Henson
1 Tom Lawton
1 W. Trevor King
2 X-Ryl669
1 buergi
2 dtk
5 mj
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
