getvisiblename() was only defined on IMAP(derived) foldertypes, but we
want it on eg. Maildirs too, so we define it centrally in Folder.Base.py
rather than only in folder.IMAP.py.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
This variable shows if this folder should be synced or is disabled due to
a folderfilter statement. This lets us distinguish between a non-existent
folder and one that has been filtered out. Previously any filtered folder
would simply appear to be non-existing.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
It is possible to get the config parameter from the Repository() which is
set in BaseFolder, so we set self.config there and remove the various
methods and 'config' parameters that are superfluous.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
We passed in the accountname to all derivatives of BaseFolder, such as
IMAPFolder(...,repository,...,accountname), although it is perfectly
possible to get the accountname from the Repository(). So remove this
unneeded parameter. Each backend had to define getaccountname() (although
the function is hardly used and most accessed .accountname directly).
On the other hand BaseFolder was using getaccountname but it never defined
the function. So make the sane thing, remove all definitions from backends
and define accountname() once in Basefolder. It was made a property and not
just a (public) attribute, so it will show up in our developer
documentation as public API.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
As all Folders share these parameters, we can safely handle them in
BaseFolder. This makes sense, as BaseFolder has a getname() function
that returns self.name but nothing actually set self.name.
It also saves a few lines of code.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
We were omitting an '%' where we needed it. Also include the traceback
information where it belongs in the new ui.error infrastructure.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
As this is essentially what it is, a set of values. This allows as
to do set arithmetics to see, e.g. the intersection of 2 flag sets
rather than clunkily having to do:
for flag in newflags:
if flag not in oldflags:
oldflags.append(flag)
Also some more code documenting.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
Empty foldernames (as they could be created through nametrans) were
failing as the uidvalidity and status files names as determined by
folder/Base.py:getfolderbasename() lead to invalid file names ''.
Fix this by handling empty file names and translating them to '.' which
leads to the special file name 'dot'. (this special value existed before
and was not invented by this patch)
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
We only copy to a single folder anyway, so clean up the code to only
pass in a single folder.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
This is a bug fix on several levels. 1) We were lacking the import of
OfflineImapError. 2) OfflineImap.ERROR.MESSAGE was misspelled as ERROR.Message.
3) COntinuing with the next message only worked in single-thread mode
(using debug) and not in multi-thread mode. The reason is that we were
invoking a new thread and catching Exceptions in the main thread. But
python immediately aborts if an Exception bubbles up to a thread start.
This was fixed by catching exceptions directly in copymessageto() which
is the new thread, rather than catching them in the main thread.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
Rather than using ui.warn, use ui.error() which outputs Exceptions to
the error log, saving them to a stack, so we get notified again at the
end of the sync run.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
Message was stored to dstfolder, but we can't find it's UID. This means we can't
link current message to the one created in IMAP. So we just delete local message
and on next run we'll sync it back. Also fixed imap.savemessage description.
This was broken by e20d8b9679.
Signed-off-by: Vladimir Marek <vlmarek@volny.cz>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
The semaphorewait()/waitforthread() logic is usefull for IMAP starting
connections. We actually use it in imapserver only.
This patch removes the over-engineered factorized methods. It tend to simplify
the code by cleaning out a chain of two direct calls with no other processes.
Reviewed-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
Based on patches by Stewart Smith, updated by Rob Browning.
plus:
- Inherit LocalStatusSQLFolder from LocalStatusFolder
This lets us remove all functions that are available via our ancestors
classes and are not needed.
- Don't fail if pysql import fails. Fail rather at runtime when needed.
- When creating the db file, create a metadata table which contains the
format version info, so we can upgrade nicely to other formats.
- Create an upgrade_db() function which allows us to upgrade from any
previous file format to the current one (including plain text)
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
Just clean up lines which end in whitespaces.
Also adapt the copyright to the current year while touching the file.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
In order to optimize performance, we fold the 1st and 2nd pass of our
sync strategy into one. They were essentially doing the same thing:
uploading a message to the other side. The only difference was that in
one case we have a negative UID locally, and in the other case, we have
a positive one already.
This saves some time, as we don't have to run through that function on
IMAP servers anyway (they always have positive UIDs), and 2nd were we
stalling further copying until phase 1 was finished. So uploading a
single new message would prevent us from starting to copy existing
regular messages.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
getmessagelist() is slow for the mapped UID case, so replace some of its
occurences with calls that are optimized for this case, ie
getmessagecount() and uidexists().
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Reviewed-and-tested-by: Vincent Beffara <vbeffara@ens-lyon.fr>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
- Some documentation improvements, this is a severely underdocumented
class. This still needs some further improvements though.
- Don't use apply(Baseclass) (which is going away in Python 3), use
IMAPFolder.__init__(self, *args, **kwargs).
- Don't call ValueError, string. It is ValueError(string)
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
More convenient way to test if a certain uid exists and getting a list
of all uids. Also, the SQL backend will have efficient overrides for
these methods.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
Rather than always having to call len(getmessagelist.keys()) as was done
before. No functional change, just nicer looking code. Also the SQLite
backend or other backends could implement more efficient implementations.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
We only have one "dstfolder" at a time when deleting/adding flags, so no
need to pass in a list of those to the ui functions that output the log
info.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
This enables us to just use the folder instance in the ui output and get
a name rather than having to call getname() all the time.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
The previous syncing strategy was doing more than we needed to and was a
bit underdocumented. This is an attempt to clean it up.
1) Do away with the previous different code paths depending on
whether there is a LocalStatus file or not (the isnewfolder() test). We
always use the same strategy now, which makes the strategy easier to
understand. This strategy is simply:
a) Sync remote to local folder first
b) Sync local to remote
Where each sync implies a 4 pass strategy which does basically the same
as before (explained below).
2) Don't delete messages on LOCAL which don't exist on REMOTE right at
the beginning anymore. This prevented us e.g. from keeping local
messages rather than redownloading everything once LocalStatus got
corrupted or deleted. This surprised many who put in an existing local
maildir and expected it to be synced to the remote place. Instead, the
local maildir was deleted. This is a data loss that actually occured to
people!
3) No need to separately sync the statusfolder, we update that one
simultanously with the destfolders...
3) Simplified the sync function API by only taking one destdir rather
than a list of destdirs, we never used more anyway. This makes the code
easier to read.
4) Added plenty of code comments while I was going through to make sure
the strategy is easy to understand.
-----------------------------------------
Pass1: Transfer new local messages
Upload msg with negative/no UIDs to dstfolder. dstfolder should
assign that message a new UID. Update statusfolder.
Pass2: Copy existing messages
Copy messages in self, but not statusfolder to dstfolder if not
already in dstfolder. Update statusfolder.
Pass3: Remove deleted messages
Get all UIDS in statusfolder but not self. These are messages
that we have locally deleted. Delete those from dstfolder and
statusfolder.
Pass4: Synchronize flag changes
Compare flags in self with those in statusfolder. If msg has a
valid UID and exists on dstfolder (has not e.g. been deleted
there), sync the flag change to dstfolder and statusfolder.
The user visible implications of this change should be unnoticable
except in one situation:
Blowing away LocalStatus will not require you to redownload ALL of
your mails if you still have the local Maildir. It will simply recreate
LocalStatus.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
Removing this lock makes the function not threadsafe, but then it is
only ever called from one thread, the main account syncer. Also, it
doesn't make it worse than most of the other functions in that class
which are also not threadsafe.
Removing this makes the code simpler, and removes the need to import the
threading module.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
We have vonverted all places in folder/* to have self.ui available,
rather than having to use UIBase.getglobalui() all the
time. Unfortunately, we did not convert the users in folder/Base.py.
This patch does it belatedly. This fixes
http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=613483
Signed-off-by: Sebastian Spaeth1 <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
Signed-off-by: Edward Z. Yang <ezyang@mit.edu>
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
This branch is currently broken, as we were using getglobalui() but it
was not imported. This fixes the missing import and makes offlineimap
run successfully.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
Previously we did not catch KeyboardInterrupts explicitly as all of the
code was executed in forked child threads which would never receive
Ctrl-c exceptions. With the upcoming single threaded modus, this code
can be run in the main thread however, so we need to take care of
KeyboardInterrupts explicitly.
This was done wherever we would catch *ALL* exceptions universally and
print out an error message.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
We already import threadutil, so no need to also import
threadutil.InstanceLimitedThread separately.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
Rather than regetting the ui with UIBase.getglobalui() all the time, we get it once in the base class and let all derivative classes just make use of self.ui rather than refetching the ui all the time, this makes for a bit less code and shorter lines.
Signed-off-by: Sebastian Spaeth <Sebastian@SSpaeth.de>
Signed-off-by: Nicolas Sebrecht <nicolas.s-dev@laposte.net>
Dear All,
I have made the attached patch to try and make offlineimap a bit more
stable in challenging situations. It's extremely useful in slow
connection environments - but sometimes if one account had the wrong
password or the connection went down then unfortunately the whole
program would crash.
I have tested this on our connection and tried throwing at it just about
every situation - connection, up down, up, down again, change password,
error whilst copying one message, etc. I have been running this patch
for the last 5 days or so syncing 6 accounts at the moment... It seems
to work and stay alive nicely (even if your connection does not)...
Hope that this can go in for the next release... Please let me know if
anyone notices any problems with this...
Regards,
-Mike
-- Attached file included as plaintext by Ecartis --
-- File: submit
From 1d6777cab23637eb830031c7cab0ae9b8589afd6 Mon Sep 17 00:00:00 2001
From: mike <mike@mikelaptop.(none)>
Date: Mon, 24 Aug 2009 19:37:59 +0430
Subject: [PATCH] This patch attempts to introduce a little more error handling - e.g.
if one account has an error because of a changed password or something
that should not affect the other accounts.
Specifically:
If one sync run has an issue this is in a try-except clause - if it
has an auto refresh period the thread will sleep and try again - this
could be quite useful in the event of the connection going down for a
little while, changed password etc.
If one folder cannot be created an error message will be displayed through
the UI and the program will continue (e.g. permission denied to create a folder)
If one message does not want to copy for whatever resaon an error message
will be displayed through the UI and at least the other messages will
be copied
If one folder run has an exception then the others will still run
The attached patch adds syncing the INTERNALDATE of IMAP folders with
the mtime of messages in maildir folders.
I want this to happen, because I'm running a dovecot over the maildirs
synced by offlineimap, and that uses the mtime as the INTERNALDATE.
When using mutt to view messages I generally sort based on the received
date, which for IMAP folders is the INTERNALDATE.
Since this is the first real coding I've done in Python the patch may
need to be cleaned up some, but it's working pretty well for me. I've
added new messages to each side, and the received date has been
preserved going both ways.
From: "Nikita V. Youshchenko"
I trued to use offlineimap and found that while being quite fast on
small folders, it takes up to several minutes (of 100% busy CPU and
almost no network traffic) to sync a folder with 2000+ messages.
While looking into the code, I found why this happens.
In folder/Base.py, in method BaseFolder.syncmessagesto_copy(),
dest.getmessagelist() is called inside a loop, while being a loop
invariant. Similar thing happens in BaseFolder.syncmessagesto_delete()
for self.getmessagelist().
This causes quadratic complexity over folder size.
Moving these calls out of loops make large folder sync fast (several
seconds instead of several minutes for folder with 2000 messages on
700MHz P3).
